Summary of the content on the page No. 1
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:33 PM Page 1
Summary of the content on the page No. 2
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:33 PM Page 2
Summary of the content on the page No. 3
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 1 Plug the AC adapter cord into Step 1 Checking the Package Contents Step 4 Setting Display Options Step 5 Set Answering System the base unit and then into a D Make sure you have received the following 120V AC outlet. To turn the Digital Answerer charge/in use items in the package. If any of these answering system items are missing or damaged, contact on, press the the Uniden Parts Department. answer on/off delete answer on/off key. •Base
Summary of the content on the page No. 4
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 2 Contents Quick Reference Guide 1 Making Calls with the RocketDial 28 Deleting the RocketDial 29 Welcome/Features 3 Caller ID Features Controls and Functions 4 Caller ID 30 Getting Started When the Telephone Rings 30 Setting up the Phone 6 Viewing the Caller ID Message List 31 Mounting the Base Unit on a Wall 11 Deleting Information from the Caller ID List 32 Setting Menu Options 13 Using the Caller ID List 33 Basics The Integrated Answering
Summary of the content on the page No. 5
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 3 Congratulations on your purchase of the Uniden EXAI3248 series cordless telephone and Welcome answering system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purpose. The color of your cordless phone may vary. As an ENERGY STAR® Partner, Uniden has determined that this product or pro
Summary of the content on the page No. 6
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 4 Controls and Functions 1. Handset antenna 2. Beltclip hole 3. Optional headset jack 4. Handset battery compartment 1 5. Handset earpiece 6. LCD display 7. (Caller ID) cid/menu key 5 8. Talk/flash key 2 9. /tone/ (left cursor) key * 10. Redial/p (pause) key 6 11. Select key 13 12. Handset microphone and 7 14 3 ringer speaker 8 15 13. Vol (Volume)/ring/ (up) key 16 14. RocketDial key 15. End key 4 16. Vol (Volume)/ring/ (down) key 9 17 17. #
Summary of the content on the page No. 7
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 5 21 22 21. Telephone line jack 22. DC IN 9V jack 23. Handset retainer clip 24. Charge/in use LED 25.(Play/stop) key 26.(Repeat/rewind) key 27. Answer on/off/ key 28. Memo rec (record) key 29. Find hs (handset) key 30. Clock/menu key 32 31. Base charging contacts 32. Base speaker 23 33. Base antenna 33 34. (Skip/fast forward) key Digital Answerer 24 charge/in use 35. Delete/ key 25 36. Greeting key 34 26 37. Ringer key answer on/off delete 27
Summary of the content on the page No. 8
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 6 Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack into the handset If your home has A. Choose the best location specially wired alarm Before choosing a location for your new phone, read the INSTALLATION equipment connected to CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY the telephone line, be INSTRUCTIONS. Here are some important g
Summary of the content on the page No. 9
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 7 B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. Charge the handset battery pack for at least 15-20 Use only the Uniden hours before using your new cordless telephone for the (BT-905) rechargeable first time! To maximize the charge capacity of your battery battery pack supplied pack, DO NOT plug t
Summary of the content on the page No. 10
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 8 4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place the handset in the base unit for 15-20 hours without interruption. The base unit’s LED light (labeled charge/in use) illuminates once the handset is placed in the base. The LED light will illuminate regardless if the battery pack is connected or not. DO NOT rely on the LED light as an indicator that the battery pack is connected an
Summary of the content on the page No. 11
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 9 Battery use time (per charge) From fully charged (15-20 hours charge time) • Up to seven hours continuous use during talk mode. • Up to fourteen days when the handset is in the standby mode. • Even when the battery Low battery alert pack is not being When the battery pack is very low and needs to be charged, the used, it will gradually phone is programmed to eliminate functions in order to save discharge over a long power. If the phone is n
Summary of the content on the page No. 12
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 10 C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and place the • Use only the supplied handset on the base unit as shown. (For wall AD-314 AC adapter. Do not use any other mounting, see "Mounting the Base Unit on a Wall", AC adapter. on page 11.) • Place the power cord 3) Raise the antenna to a vertical position. so that it does not creat
Summary of the content on the page No. 13
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 11 5) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular Mounting the Base Unit on a Wall Setting the handset retainer clip for wall mounting 1) On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degre
Summary of the content on the page No. 14
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 12 6) Plug the telephone line cord into the telephone outlet. 7) Raise the antenna to a vertical position. 8) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behin
Summary of the content on the page No. 15
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 13 Setting Menu Options There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the talk/flash key. The cordless phone If the phone rings when AutoTalk is On, simply remove the handset from the base features include TM and the phone automatically answers the call. If the phone rings when AutoT
Summary of the content on the page No. 16
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 14 To enter your Area Code: If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number. If your calling area 1) When the phone is
Summary of the content on the page No. 17
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 15 Choosing the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: • Make sure your battery 1) When the phone is in the standby mode, press and hold pack is fully charged before choosing the the cid/menu key. The following scre
Summary of the content on the page No. 18
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 16 Making and Receiving Calls Handset On Base Handset Off Base Pick up the handset Press the talk/flash, any number, To receive (AutoTalk:On) or pick up the /tone/ or #/ key * a call handset and press the talk/flash (AutoTalk:On). Refer to page 13 "Setting key (AutoTalk:Off). Menu Options" to turn 1) Pick up the handset. 1) Press the talk/flash key. on the AutoTalk feature if desired. 2) Press the talk/flash key. 2) Listen for the dial tone.
Summary of the content on the page No. 19
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 17 Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volume Press the volume up key or volume down key (labeled as, vol/ring/ or vol/ring/ keys) in standby mode to select one of five ringer tones and volume combinations. Earpiece volume Pressing the volume up key or volume down key (labeled as, vol/ring/ or vol/ring/ keys) during a call will change the earpiece volume of the handset. This setting will remain in effect a
Summary of the content on the page No. 20
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 18 Redial The the redial/p key redials the last number dialed. The redialed number can be up to 32 digits long. Tone Dialing Switch-over Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. For example, entering your bank account number • The tone feature only after you have called your bank.
