Summary of the content on the page No. 1
EXS 9960 4th 99.8.20 4:06 PM Page 1
Summary of the content on the page No. 2
EXS 9960 4th 99.8.20 4:06 PM Page 2 Introduction Congratulations on your purchase of the EXS 9960 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 900 MHz Spread Spectrum technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features • 900 MHz Spread Spectrum Technology • Caller ID and Call Waiting Caller ID • 50 Number Caller ID Memory • Lighted Keypad • 3-Line, 1
Summary of the content on the page No. 3
EXS 9960 4th 99.8.20 4:06 PM Page 3 Controls and functions 1 2 5 6 14 vol 7 talk flash 15 8 call id del mem 16 9 abc def 12 3 17 ghi jkl mno 45 6 pqrs tuv wxyz 78 9 10 18 oper tone0# 3 11 19 redial/p setup select mute/ring 12 20 13 4 21 DIGITAL 900MHz SPREAD SPECTRAM 22 25 26 status open backup battery power 27 23 page/find 24 28
Summary of the content on the page No. 4
EXS 9960 4th 99.8.20 4:06 PM Page 4 1. Handset antenna 22. Handset retainer clip 2. Headset jack cover 23. Spare battery charge compartment 3. Handset battery compartment 24. Base charging contacts 4. Ringer off-on switch 25. Base antenna 5. Handset earpiece 26. Status LED 6. LCD display 27. Power LED 7. Talk key 28. Page/Find key 8. Volume/Cursor down key 29. Pulse-Tone switch 9. Call ID key 30. DC power input 10. Tone/Backspace key 31. Phone jack 11. Redial/Pause key 12. Setup key 13. Handse
Summary of the content on the page No. 5
EXS 9960 4th 99.8.20 4:06 PM Page 5 Getting Started Contents Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Basics Read this first..........................................................3 Step 1: Checking the package contents...............4 Step 2: Setting up the base unit ...........................5 Mounting the base unit on a wall ...........8 Step 3: Preparing the battery pack.....................10 Basics
Summary of the content on the page No. 6
900MHz DIGITAL SPREAD SPECTRAM status power open backup battery page/find EXS 9960 4th 99.8.20 4:06 PM Page 6 Read this first This cordless telephone must be set up before use. Follow these steps; Step 1 (page 4) Unpack and check the telephone and accessories. Step 2 (page 5 to 9) Next, choose the best location to set up the base unit. Base unit Step 3 (page 10 to11) Then, insert the battery pack into the handset. You must charge the battery pack for more than 17 hours before using the phone.
Summary of the content on the page No. 7
900MHz DIGITAL SPREAD SPECTRAM status power open backup battery page/find EXS 9960 4th 99.8.20 4:06 PM Page 7 Checking the package contents Make sure you have received the following items in the package. • Base unit • Handset • AC adapter (AD-420) • Rechargeable • Telephone line • Wall mount adapter battery pack cord (2) (BT-999) • This Owner's Manual • Precautions and Important Safety Instructions • Quick Reference Guide • Registration Card • Beltclip Uniden Parts Department (800) 554-3988 H
Summary of the content on the page No. 8
EXS 9960 4th 99.8.20 4:06 PM Page 8 Setting up the base unit Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider: Avoid heat sources, such as Avoid noise sources such as a window radiators, air ducts, and sunligh
Summary of the content on the page No. 9
900MHz DIGITAL SPREAD SPECTRAM status message open backup battery page/find EXS 9960 4th 99.8.20 4:06 PM Page 9 Connect the base unit If you want to install the base unit on the wall, see page 8. Route the cord. Place the power cord so it 2 does not create a trip To AC outlet hazard, or where it could become chafed and create a fire or electrical hazard. To DC IN 9V AC adapter 1 (supplied) To telephone outlet To TEL LINE Telephone line cord (supplied) 1 Connect the telephone line cord to the T
Summary of the content on the page No. 10
EXS 9960 4th 99.8.20 4:06 PM Page 10 Use only the supplied AD-420 AC adapter. Do not use any other AC Polarity of the plug adapter. Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. Modular If your telephone outlet isn't modular, contact your telephone company for assistance. Choose the dialing mode PULSE TONE Depending on your dialing system, set the PULSE-TONE switch as follows: If your dialing syste
Summary of the content on the page No. 11
EXS 9960 4th 99.8.20 4:06 PM Page 11 Mounting the base unit on a wall Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount 1 adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack. 3 Plug the telephone line cord into the telephone outlet. 4 Wrap the AC adapter 2 - 7 cord inside the molded wiring 6 channel. Then wrap 2 the cord around the strain relief notch
Summary of the content on the page No. 12
900MHz DIGITAL SPREAD SPECTRAM EXS 9960 4th 99.8.20 4:06 PM Page 12 8 On the base unit, pull the Handset retainer handset retainer out of the slot. Rotate it clockwise 180 degrees. 9 Flip the retainer from front to back. Slide it back into the slot If the handset beltclip is attached, you cannot so that the lip of the retainer is charge the handset facing up and the oval is down. The forward when the phone is retainer holds the handset mounted on the wall. (See in place. page 36.) Direct wall
Summary of the content on the page No. 13
900MHz DIGITAL SPECTRAM SPREAD status power open backup battery page/find EXS 9960 4th 99.8.20 4:06 PM Page 13 Preparing the battery pack Charge the battery pack for more than 17 hours before you start using your phone. 1 Press in on the battery cover release and slide the cover down until it comes off. 2 Install the nickel-cadmium battery with the label facing down. Label face 3 Slide the battery cover on until it snaps into place. 4 Place the handset on the base. 5 Make sure that the “status
Summary of the content on the page No. 14
Hz status power page/find status power page/find open backup battery EXS 9960 4th 99.8.20 4:06 PM Page 14 Charging optional battery packs The base unit of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. 1. Pull the cover of battery charger. 2. Put the battery pack in the Please visit your authorized Uniden dealer compartment with contacts to obtain an extra battery facing down. pack or contact the Uniden parts department 3. Replace the ch
Summary of the content on the page No. 15
EXS 9960 4th 99.8.20 4:06 PM Page 15 Making a call On-hook dialing 1 Enter the phone number. (Up to 32 digits.) Example: Enter 8178583300 Press if you enter a del
wrong number at the 8178583300
step 1. 2 Press . talk “Talk” flashes on the display. Talk
8178583300
You must press a key within 20 seconds or the Then the volume setting is displayed. phone will return to For example, if the volume is set to standby. high the display shows. Talk
3 The numbe
Summary of the content on the page No. 16
EXS 9960 4th 99.8.20 4:06 PM Page 16 Off-hook dialing 1 Press . talk “Talk” flashes on the display. Talk
Then the volume setting is displayed. For example, if the volume is set to high the display shows: Talk
2 Dial the phone number. Example: Enter 8178583300 Talk 0:17
8178583300
3 To hang up, press or place the talk handset on the base. The call-time will be displayed for about 5 seconds. 10:03
13
Summary of the content on the page No. 17
EXS 9960 4th 99.8.20 4:06 PM Page 17 Receiving a call From the handset 1 Phone rings.
Calling 2 Press . “ talk Talk” and volume setting appears on the display. Talk 0:00
¥
»
3 Talk with the caller. Talk 0:02
talk 4 To hang up, press or place the handset on the base. The call time will be displayed for about 5 seconds. 115:35
AutoTalk when ringing When the AutoTalk setting is on and there is an incoming call, simply lift the handset from the bas
Summary of the content on the page No. 18
ringer off on ringer off on EXS 9960 4th 99.8.20 4:07 PM Page 18 Adjusting the ringer and earpiece volume Ringer volume In the standby mode, press mute/ring Ringer High on the handset to set the handset ringer volume. mute/ring There are two ringer volume Ringer Low settings; high and low. Ringer on/off switch This switch turns the handset ringer on or off. Earpiece volume Pressing or will change the earpiece volume of the handset. ¥
»
This setting will remain in effect afte
Summary of the content on the page No. 19
EXS 9960 4th 99.8.20 4:07 PM Page 19 Redialing a call The last three phone numbers dialed can be quickly redialed. On-hook redialing 1 Press . redial/p The phone number that was last dialed appears on the display. If the number exceeds 32 2 Press again. redial/p digits, only the first 32 Each press of will display redial/p digits are retained for one of the last three numbers dialed. redialing. talk
Most 8178583300
recent redial/p
Summary of the content on the page No. 20
EXS 9960 4th 99.8.20 4:07 PM Page 20 Off-hook redialing 1 Press . talk “Talk” appears flashing on the display. Talk
Talk
2 Press . redial/p The last number dialed will be displayed. talk 3 To hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds. Only the last number dialed can be accessed after talk has been pressed. 17
