Summary of the content on the page No. 1
Summary of the content on the page No. 2
Welcome Congratulations on your purchase of the Uniden DCX750 accessory handset and charger. You can place this fully featured cordless handset anywhere your home has AC power. Note: Illustrations in this manual are used for explanation purposes. Some illustrations may differ from the actual unit. Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Unide
Summary of the content on the page No. 3
Compatible Bases This handset is compatible with Uniden's 2.4 GHz Digital Expandable phone system: the DCT756/DCT758 series, the DCT746/DCT748 series, the DMX776/778 series, and the DCT646/DCT648 series. Visit www.uniden.com for the most up-to-date list of compatible bases. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See back cover page for con
Summary of the content on the page No. 4
Installing the Belt Clip Line up the tabs with the holes on each side of the handset. Press the belt clip down until both tabs click into place. To remove the belt clip, pull both sides of the clip to release the tabs from the holes. Installing the Optional Headset Your phone may be used with an optional headset. To use a headset, insert the headset plug into the headset jack. Headsets may be purchased by calling the Uniden Parts Department. See back cover page for contact information
Summary of the content on the page No. 5
Registering the Handset You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.) For DCT75 Series Bases (DCT756, DCT7565, DCT758, DCT7585) To register to a DCT75 series base, place the accessory handset in the base. While the handset is registering, HANDSET REGISTERING appears in the LCD. When REGISTRA
Summary of the content on the page No. 6
2. On the handset, press and hold [#/ →] until you hear a beep and see HANDSET REGISTERING in the display. 3. When REGISTRATION COMPLETE is displayed, the handset has been registered to the base. If REGISTRATION FAILED appears, please try these steps again. Resetting the Handset If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1. Press and hold [] and [#/>] for at
Summary of the content on the page No. 7
Using the Interface Parts of the Handset 1. Antenna 9. [menu/clear] 16.[] (up) 2. Headset jack cover 10.[redial/pause] 17.[ ] (end call) 3. Beltclip hole 11.[/flash] 18.[] (Caller ID) 4. Speaker phone (talk/flash) 19.[] (down) speaker and ringer 12.[] (phonebook) 20.[#/>] (pound) 5. Battery 13.[ ∗/tone/<] compartment 21.[] (speaker) 14.[xfer/intercom] 6. New message LED 22.Microphone (transfer/intercom) 7. Earpiece 23.Charging contacts 15.[select/ ] 8. LCD display (select/messages) 6
Summary of the content on the page No. 8
Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. ICON STATUS DESCRIPTION The battery icon indicates the handset Standby/ battery status: Talk full, medium, low, and empty. The ringer off icon indicates that the Standby ringer is turned off. The mute icon appears when you mute Talk the handset. The call record icon appears while Talk recording a conversation. The boost icon appears when the Talk C
Summary of the content on the page No. 9
To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves and operates. Using the Handset Menus To open the menu, press [menu/clear]. Select the option you want by pressing the four-way function key. This will move the cursor; the option currently selected has a triangle beside it. Activate the selected option by pressing [select/ ]. To exit the menu and return to standby, press []. If you do not press a key withi
Summary of the content on the page No. 10
To scroll through the records from A to Z, Scroll through the press []. To scroll trough the records from Z to records A press []. Jump to records that Press the number key corresponding to the letter start with a certain you want to jump to. letter Store a record in the Find the record you want to store and press phonebook [select/ ]. Find the entry you want to dial and press Dial a record [/flash] or []. Find the entry you want to dial and press Delete a record [menu/clear]. Delete
Summary of the content on the page No. 11
Press [] to enter the phonebook. Once in the phonebook, you have the following options: To scroll through the phonebook from A to Z, press Scroll through []. To scroll through the phonebook from Z to A the entries press []. Jump to entries Press the number key corresponding to the letter you that start with a want to jump to. certain letter Move the cursor to STORE NEW, then press Store a new entry [select/ ]. 1.Move the cursor to COPY and press [select/ ]. 2.Select the handset you wan
Summary of the content on the page No. 12
Hold, Conference, Transfer, and Intercom Press [xfer/intercom]. If you leave a caller on hold for Put a call on more than five minutes, the call will be disconnected. hold To return to the party on hold, press [/flash] or []. To join a call already in progress, press [ /flash] or Join an in- []. You can hang up normally; the other station progress call remains connected to the call. Press [xfer/intercom]; the call is placed on hold. Use [] or [] to select the station you want to transfer
Summary of the content on the page No. 13
Muting the Microphone To mute the microphone so the caller can't hear you, press [menu/clear]. Move the cursor to select MUTE and then press [select/ ]. MUTE ON and appear in the display. Repeat the procedure to cancel muting. Privacy Mode To prevent other stations from interrupting a call, press [menu/clear]. Move the cursor to select PRIVACY MODE and then press [select/ ]. PRIVACY MODE ON and P appear in the display. Repeat the procedure to turn off privacy mode. Adjusting the Audio Ton
Summary of the content on the page No. 14
Press [/2]. The system plays the message Play messages then announces the time and date the message was received. Press [|< >|/3] to go to the beginning of the next Skip a message message. While a message is playing, press [ ∅/4]. The Delete a message message is permanently deleted. End message Press [/5] to stop the message playback. review Press [7] t
Summary of the content on the page No. 15
4. Enter your access number (up to 20 digits). If you need the phone to wait before sending the next digits, press [redial/pause] to insert a two-second pause. For a longer pause, press [redial/pause] multiple times. Each pause counts as one digit. 5. Press [select/ ] when you are finished. Once you program your access number, press [select/ ] to dial your voice mail service. Maintenance Battery Life With average use, your battery talk time will be approximately 5 hours and standby time wi
Summary of the content on the page No. 16
Caution: - This equipment contains a rechargeable Nickel-Metal- Hydride battery. - Do not remove the batteries to charge them. - Never throw the battery in a fire or disassemble or heat it. - Do not remove or damage the battery casing. - Nickel is a chemical known to state of California to cause cancer. - Do not short-circuit the battery. - Do not charge the battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manu
Summary of the content on the page No. 17
Privacy of communications may not be ensured when using this phone. To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC's exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories
Summary of the content on the page No. 18
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of origi
Summary of the content on the page No. 19
At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. if you have any questions or problems, please do not return this product to the place of purchase. Our customer care specialists are here to help you! Visit our website at www.uniden.com or call our Customer Having Service Hotline at 1-800-297-1023, trouble? Monday through Friday, 7 AM to 7 PM or Saturday/Sunday, 9 AM to 5 PM, CST. The Customer Service Hotline is closed on holidays. To order headsets, addition
Summary of the content on the page No. 20
