Summary of the content on the page No. 1
®
ANA 9710
900 MHz Analog
PBX
Cordless Telephone
Operating Guide
Summary of the content on the page No. 2
One Year Limited Warranty WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not mai
Summary of the content on the page No. 3
Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795, 4,597,104 4,797,916 4,803,491 5,381,460 5,426,690 5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,787,356 5,794,152 5,838,721 and other patents pending. OMANA9710 ©2001 Uniden America Corporation. Printed in U.S.A. All rights reserved. UCZZ01717BZ
Summary of the content on the page No. 4
PRECAUTIONS Before you read anything else, please observe the following: WARNING! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. BATTERY WARNING n This equipment contains a Rechargeable Nickel-Cadmium Battery. n Do not short circuit the battery. n Do not charge the Rechargeable Nickel-Cadmium Battery used in this equipment in any charger other than the one
Summary of the content on the page No. 5
Handset Controls & Functions 1. Ringer ON/OFF switch 10. Volume (r/vol) Key 2. Message Display 11. Mute (mute) Key 3. Hold (hold) Key 12. Transfer (xfer) Key 4. Talk (talk) Key 13. Conference (conf) Key 5. Numeric Keypad 14. Flash (flash) Key 6. Pause (pause) Key 15. Channel Key 7. Redial (rdl) Key 16. Search (srch) Key 8. Microphone 17. Memo (mem) Key 9. Head Set Jack
Summary of the content on the page No. 6
Base Unit Controls & Functions 18. DC Power Jack 19. Hold (hold) Key 20. Page/find (page/find) Key 21. Tone/Pulse Switch
Summary of the content on the page No. 7
TABLE OF CONTENTS Important Safety Instructions...............................................2 About Your ANA 9710 .....................................................4 Important Electrical Considerations .........................................5 Range ...............................................................5 Telephone Line Problems ................................................5 Radio Interference......................................................6 More Than One Cordless Telephon
Summary of the content on the page No. 8
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 4. Do not use this product near water; for ex
Summary of the content on the page No. 9
D. If the product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage, and will often require extensive work by a qualified technician to restore the product to normal operation. E. If the product has been dropped, or the cabinet has been damaged. F. If the product exhibits a distinct change in performance. 13. Do not use the telephone to report a
Summary of the content on the page No. 10
About Your ANA 9710 Congratulations on your purchase of the Uniden ANA 9710 Cordless Telephone. The ANA 9710 is designed and engineered to exacting standards for reliability, long life, and outstanding performance. It is designed to work with a PBX system. To get the most from your ANA 9710, please read this Operating Guide thoroughly. To help familiarize you with the features of your cordless phone, refer to the Handset and Base Unit illustration foldout from the front cover. Your ANA 9710 incl
Summary of the content on the page No. 11
Important Electrical Considerations Warning: Please do not attempt to unplug any appliance during an electrical storm. Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void
Summary of the content on the page No. 12
Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as a TV, refrigerator, vacuum cleaner, fluorescent lighting, computer equipment, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your office to see what appliances may be causing the problem. In addition, we recommend that the Base
Summary of the content on the page No. 13
ANA 9710 Features n Super Long Range 900MHz Digital Spread Spectrum n 2-line, 16-digit LCD Display n Headset Jack n Ringer Volume Control n Handset Volume Control n Single button access to: CONFERENCE, HOLD, and TRANSFER features n Four Function Keys: PAUSE, FLASH, REDIAL, SEARCH n 20 Number Memory Store and Search n Separate Charging Stand with Spare Battery Charging Capability n AutoStandby n AutoTalk n Vibrate Ringer Alert n Easy Installation n Out of Range Protection n Low Battery Protection
Summary of the content on the page No. 14
Installing Your ANA 9710 Selecting the Installation Location Select a location for the ANA 9710 that avoids excessive heat or humidity. The Base Unit of your ANA 9710 can be placed on a desk or tabletop near a standard 120V AC outlet and telephone line jack. The Base Unit can also be mounted on a standard AT&T or GTE wall plate using the optional Wall Mount Adapter. If you will use the ANA 9710 with a Standard 2500 type Telephone Desk Unit, place the ANA 9710 near that phone. Keep the Base Unit
Summary of the content on the page No. 15
Connecting the Telephone Cords The ANA 9710 must be connected to an analog PBX port or a standard analog telephone line. CAUTION: n Never install telephone wiring during a lightning storm. n Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. n Use caution when installing or modifying telephone lines. You can also connect a standard 2500-type desk phone to the ANA 9710: Connect to the LINE OUT Jack 9
Summary of the content on the page No. 16
Tone/Pulse Switch Be sure the TONE/PULSE switch is in the TONE position. Note: Most systems are Tone dialing. Check with your PBX Administrator if you are not sure whether your system is Tone or Pulse dialing. Applying Power to the Base and Charger Units Use only the supplied AC Adapter: EXP9704 10
Summary of the content on the page No. 17
IMPORTANT! Place the power cord so that it does not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards. Note: If you cannot plug the AC Adapter into the outlet, contact someone about replacing the outlet. The unique design of your ANA 9710 allows you to place the Handset in the Charging Unit with or without the Beltclip attached. The Charging Unit also has the ability to charge a second battery with or without the Handset being charged. The Batter
Summary of the content on the page No. 18
Wall Installation Standard Wall Plate Mounting This Phone is designed to be mounted on a standard AT&T or GTE wall plate. To attach the wall mount stand to the Base Unit: 1. Slide the Wall Mount stand into the notches at the top of the Base Unit, push the Wall Mount stand down and snap it into place. 2. Plug the AC Adapter into the Base Unit as previously described. 3. Place the AC Adapter cord inside the molded channel of the Wall Mount stand. 4. Plug one end of the short telephone cord into th
Summary of the content on the page No. 19
6. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 7. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following: n Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when
Summary of the content on the page No. 20
1. Insert two mounting screws into the wall 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the phone. 2. Plug and secure the AC Adapter cord by following steps 2 and 3ofthe Standard Wall Plate Mounting. 3. Plug one end of the telephone line cord into the LINE jack on the Base Unit. Optionally, plug one end of a standard 2500 type desk phone into the PHONE jack. Then place the telephone cord(s) inside the molded channel(s) on the bottom of the Wall
