Summary of the content on the page No. 1
2-Line Intercom Speakerphone
DECT6.0 Cordless Handset
Telephone Answering System
User’s Guide
Please read this manual
before operating product
for the first time.
Model 25250
Summary of the content on the page No. 2
Important Information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. Y
Summary of the content on the page No. 3
Important Information 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) prompt
Summary of the content on the page No. 4
Important Information Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Licensing Licensed under US Patent 6,427,009. Hearing Aid Compatibility This telephone system meets FCC standards for Hearing Aid Compatibility. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be insta
Summary of the content on the page No. 5
Table of Contents EquipmEnt ApprovAl i nformA tion ............... 2 Set o FFice t ime ...........................................21 i E nt rfEE r ncE i A nform tion ........................... 3 Set w ork h S our ........................................22 l icEnsing .................................................. 4 Set a Fter h S our .........................................22 HEAring Aid c omp Atibility ......................... 4 r ing Dela y ...............................................
Summary of the content on the page No. 6
Table of Contents e raSing m eSSageS .....................................38 c AE ll r ( id cid) ....................................31 t o eraSe a SS me age while it iS Pyingla 3 8 r eceiving anD Soringt D ci r DS ecor .........31 t o eraSe a meSSage aFter it Pyingla .....38 r eviewing D ci r ecorDS .............................31 t o eraSe all PS reviou yl PyeD la meSSageS Svinga a ciD r ecorD ot Phone Book in a B mail ox ..........................................38 m emory ..............
Summary of the content on the page No. 7
Connections & Setup Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Parts Checklist Make sure your package includes the following items: Base Batt
Summary of the content on the page No. 8
Connections & Setup Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If
Summary of the content on the page No. 9
Connections & Setup Handset Layout Visual Indicator 3 Soft keys display DND/Privacy Spk (button) (Speaker button) Exit (button) CID (button) VOL +/- Off (buttons) (button) DIR (button) Talk #Pause (button) (button) Redial (button) * Tone (button) Mute/Del (button) Int/Hold (button) Menu/Flash (button)
Summary of the content on the page No. 10
Connections & Setup Base Layout Ans Sys (button) DND/Privacy Vol +/- (button) (buttons) Memo CID (button) (button) Delete DIR (button) (button) Play/Stop (button) One Touch Exit 3 Soft Keys (1-10) (button) buttons #Pause Charge (button) LED Line 1 & 2 Mute Speaker (buttons) (button) Headset (button) (button) Intercom Flash (button) (button) Page Hold (button) (button) Redial (button) 10
Summary of the content on the page No. 11
Connections & Setup Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model 5-2734, which is compatible with this unit. 1. Locate battery which is packaged inside a plastic bag and is separate from the handset. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the
Summary of the content on the page No. 12
Connections & Setup Base Station The phone may be connected to two line (RJ14C) wall jacks to accommodate all two lines. 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. 2. Plug the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. CAUTION: To reduce risk of personal injury, fire, or damag
Summary of the content on the page No. 13
Connections & Setup 4. If you want to mount the telephone on the wall, you can plug the 2 lines such as the below drawing; Line 2 Line 1 -OR- Line 2 Line 1 -OR- Line 1 + 2 1
Summary of the content on the page No. 14
Programming the Telephone 5. Place the handset in the base cradle. The charge indicator illuminates, verifying the battery is charging. 6. Allow the phone to charge for 14 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised. NOTE: If the model you bought is a RE2 version, there is one additional charger. Plug the power supply cord into the power jack on the back of the charger and the other end into an electrical outlet. Place handset in the
Summary of the content on the page No. 15
Programming the Telephone Area Code (base only), Registration (handset only), De-Registration (base only), 2nd Call Alert (both base and handset), Handset Name (handset only), Update HS List (base only). Date/Time From the Phone Setting Menu: 1. Press the VOL (- or +) button to scroll to Date/Time. 2. Press SELECT soft key. “Year 2008” shows in the display. 3. Use the touch-tone pad to enter the last two digits of the current year (range: 00 to 99). 4. Press SAVE soft key to save the year s
Summary of the content on the page No. 16
Programming the Telephone Auto Answer Intercom (applicable for base and handset) If it is set to on, this handset or base will auto answer the intercom call when it receives an intercom call. From the Phone Setting Menu: 1. Press the VOL (- or +) button to scroll to Auto Answer Int. 2. Press SELECT soft key. Use the VOL (- or +) button to scroll to your selection. The default setting is Off. 3. Press SELECT soft key to save your selection and “Saved” shows in the display. Dial Mode (only app
Summary of the content on the page No. 17
Programming the Telephone Register From the Phone Setting Menu: 1. Press the VOL (- or +) button to scroll to Register. 2. Press SELECT soft key. “Press base unit page button until beep” shows in the display. 3. Press and hold the Page button on base for 5 seconds. 4. “Registration” displays to indicate the base is now in registration mode. 5. If the registration is successful, the handset shows “Registration complete” for 2 seconds and emits a confirmation tone. 6. If the registration is
Summary of the content on the page No. 18
Programming the Telephone 2nd Call Alert If it is set to On, you will hear the alert tone when you are in conversation and there is an incoming call from another line. From the Phone Setting Menu: 1. Press the VOL (- or +) button to scroll to 2ND Call Alert. 2. Press SELECT soft key. Use the VOL (- or +) button to scroll to your selection. The default setting is On. 3. Press SELECT soft key to save your selection and “Saved” shows in the display. Handset Name (only applicable for handset)
Summary of the content on the page No. 19
Programming the Telephone Language From the Display Setting Menu: 1. Press the VOL (- or +) button to scroll to the Language. 2. Press SELECT soft key. 3. Use the VOL (- or +) button to select English, Francais or Espanol. The default setting is English. 4. Press SELECT soft key to save your selection. Contrast From the Display Setting Menu: 1. Press the VOL (- or +) button to scroll to the Contrast. 2. Press SELECT soft key. The “MIN and MAX” contrast scale shows on the display. 3. Use the V
Summary of the content on the page No. 20
Programming the Telephone Ring Volume There are 5 volume levels and OFF for your selection. The Ring volume can be set individually for each line. From the Sound Settings Menu: 1. Press the VOL (- or +) button to scroll to the Ring Volume. 2. Press SELECT soft key. 3. Use the VOL (- or +) button to scroll to your selection and use the DIR or CID button to toggle between L 1 and L 2. The default setting is VOL 3. 4. Press SELECT soft key to save your selection and “Saved” shows in the displ
