Summary of the content on the page No. 1
Operating Instructions
Link-to-Cell Cellular Convergence Solution
Model No. KX-TG7841
KX-TG7842
KX-TG7843
KX-TG7844
KX-TG7845
KX-TG365SK
KX-TG7871
KX-TG7872
KX-TG7873
KX-TG7874
KX-TG7875
KX-TG385SK
Model shown is KX-TG7841.
Before initial use, see “Getting Started”
on page 10.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 80.
For assistance, visit our Web
Summary of the content on the page No. 2
Table of Contents Introduction Caller ID Service Model composition .......................................3 Using Caller ID service ...............................48 Accessory information ..................................3 Caller list ....................................................49 Important Information Using Bluetooth Devices For your safety .............................................6 Copying phonebook from a cellular phone Important safety instructions ........................7 (pho
Summary of the content on the page No. 3
Introduction Model composition Base unit Handset Series Model No. Part No. Part No. Quantity *1 KX-TG7841 KX-TG7841 KX-TG7841 KX-TGA680 1 series KX-TG7842 KX-TG7841 KX-TGA680 2 KX-TG7843 KX-TG7841 KX-TGA680 3 KX-TG7844 KX-TG7841 KX-TGA680 4 KX-TG7845 KX-TG7841 KX-TGA680 5 KX-TG365SK KX-TG7841 KX-TGA680 5 *1 KX-TG7871 KX-TG7871 KX-TG7871 KX-TGA680 1 *2 series KX-TG7872 KX-TG7871 KX-TGA680 2 KX-TG7873 KX-TG7871 KX-TGA680 3 KX-TG7874 KX-TG7871 KX-TGA680 4 KX-TG7875 KX-TG7871 KX-TGA680 5 KX-TG385SK
Summary of the content on the page No. 4
Introduction *1 *2 *3 *4 *5 Supplied handset qty. 1 unit 2 units 3 units 4 units 5 units No. Accessory item/ Accessory quantity Order number F Belt clip/PNKE1268Z1 1 2 3 3 3 G Charger/PNLC1040ZB – 1 2 3 4 *1 KX-TG7841/KX-TG7871 *2 KX-TG7842/KX-TG7872 *3 KX-TG7843/KX-TG7873 *4 KX-TG7844/KX-TG7874 *5 KX-TG7845/KX-TG7875/KX-TG365SK/KX-TG385SK *6 PNLV226Z: KX-TG7841/KX-TG7842/KX-TG7843/KX-TG7844/KX-TG7845/KX-TG365SK PNLV234Z: KX-TG7871/KX-TG7872/KX-TG7873/KX-TG7874/KX-TG7875/KX-TG385SK *7 The desk s
Summary of the content on the page No. 5
Introduction *2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender *3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site: http
Summary of the content on the page No. 6
Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or For your safety placed under heavy objects. To prevent severe injury and loss of life/ property, read this section carefully before Operating safeguards using the product to ensure proper and safe R Unplug the product from power outlets operation of your product. before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. WARNING R Do not spill liquids (deter
Summary of the content on the page No. 7
Important Information – the handset batteries need recharging or have failed. Important safety – there is a power failure. instructions Battery When using your product, basic safety R We recommend using the batteries noted precautions should always be followed to on page 4. USE ONLY rechargeable reduce the risk of fire, electric shock, and Ni-MH batteries AAA (R03) size. injury to persons, including the following: R Do not mix old and new batteries. 1. Do not use this product near water for R Do
Summary of the content on the page No. 8
Important Information R If the reception for a base unit location is Notice for product disposal, transfer, not satisfactory, move the base unit to or return another location for better reception. R This product can store your private/ Environment confidential information. To protect your privacy/confidentiality, we recommend that R Keep the product away from electrical noise you erase information such as phonebook generating devices, such as fluorescent or caller list entries from the memory be
Summary of the content on the page No. 9
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.0 R Frequency range: 1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: *1 Base unit: Standby: Approx. 1.2 W Maximum: Approx. 4.5 W *2 Base unit: Standby: Approx. 1.2 W Maximum: Approx. 8.5 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.8 W *2 R USB
Summary of the content on the page No. 10
Getting Started n Base unit (KX-TG7871 series: page 3) R Use only the supplied Panasonic AC Setting up adaptor PNLV234. R The hook of the base unit is not designed to hold the AC adaptor cord for the desk stand Connections or wall mounting use (page 67). R If you do not connect the telephone line cord and use only cellular lines, set the “Click” “Click” cellular line only mode to use this unit more conveniently (page 19). n Base unit (KX-TG7841 series: page 3) R Use only the supplied Panasonic
Summary of the content on the page No. 11
Getting Started Battery installation Note when setting up R USE ONLY Ni-MH batteries AAA (R03) Note for connections size. R Do NOT use Alkaline/Manganese/Ni-Cd R The AC adaptor must remain connected at batteries. all times. (It is normal for the adaptor to feel warm during use.) R Confirm correct polarities ( , ). R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor ma
Summary of the content on the page No. 12
Getting Started Panasonic Ni-MH battery Controls performance (supplied batteries) Operation Operating time Handset *1 In continuous use 10 hours max. *1 Not in use (standby) 8 days max. G *1 If eco mode is on. Note: R Actual battery performance depends on H usage and ambient environment. R Even after the batteries are fully charged, the handset can be left on the base unit or charger without any ill effect on the A batteries. R The battery level may not be displayed B I correctly after you repl
Summary of the content on the page No. 13
Getting Started MNOISE REDUCTION N USB jack Charge contacts (KX-TG7871 series: page 3) Charge contacts n Control type Soft keys Speaker The handset features 2 soft keys. By Display pressing a soft key, you can select the MHOLD N feature shown directly above it on the display. After a cellular phone is paired, MREDIAL N MPAUSE N MCELL N is displayed. MFLASH N MCALL WAIT N Navigator key M Z N (SP-PHONE: Speakerphone) – M D N, M C N, M F N, or M E N: Scroll through various lists and items. SP-PH
Summary of the content on the page No. 14
Getting Started Item Meaning Charging the cellular phone by Out of base unit range USB The landline is in use. Available for: R When flashing: KX-TG7871 series (page 3) The call is put on hold. R When flashing rapidly: An By connecting a USB cable (not supplied) to incoming call is now being the cellular phone and the base unit, you can received. charge a cellular phone. However, the cellular A cellular line is in use. phone cannot exchange data with the base R When flashing: unit through a USB
Summary of the content on the page No. 15
Getting Started Item Meaning Item Meaning *2 Clarity booster is on. “Greeting only” is (page 23) selected as the caller’s recording time. In this case, In use Answering system is being the answering system used by another handset or answers calls with a greeting the base unit. message and caller Cell1 in Someone is using the messages are not recorded. use cellular line. (page 62) Cell2 in A Bluetooth headset is use connected to the base unit. Ready to use it. Line in Someone is using the use la
Summary of the content on the page No. 16
Getting Started Display language Initial settings You can select either “English” or “Español” as the display language. The n Direct command code: default setting is “English”. Programmable settings can be accessed by pressing MMENU N, #, and then the Handset / Base unit corresponding code on the dial keypad (page 36). 1 MMENU N # 1 1 0 Example: Press MMENU N # 1 0 1. 2 M b N: Select the desired setting. a n Symbol meaning: MSAVE N Example: M b N: “Off” 3 Proceed with the operation for your uni
Summary of the content on the page No. 17
Link to Cell R After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the Link to cell feature rest of the procedure must be To use this feature, you must first pair and completed within 5 minutes. connect your cellular phones to the base unit 2 Your cellular phone: (page 17). While the CELL 1 or CELL 2 indicator is Your cellular phones must have Bluetooth flashing, follow the instructions of your wireless technology that is compatible with this cellular phone to enter the pairin
Summary of the content on the page No. 18
Link to Cell – “On (without Talking CID)”: The handset and base unit use your cellular Link to cell settings phone’s ringer tone. Caller information is not announced even if the Talking Caller ID is turned on. Selecting which unit receives Important: cellular calls R To use this feature, your cellular phone You can select which unit rings and receives must support Bluetooth in-band ringtone. calls for a cellular line. When “All” is Refer to your cellular phone’s operating selected, all handsets
Summary of the content on the page No. 19
Link to Cell intervals when it returns within base unit Handset range. You can set the interval. The default setting is “1 min”. 1 To connect/disconnect: For CELL 1: MMENU N # 6 2 5 1 Important: For CELL 2: MMENU N # 6 2 5 2 R When you are using a cellular line or a R A long beep sounds. Bluetooth headset, the base unit loses its 2 MOFF N connection from other Bluetooth devices (cellular phone or headset). To automatically resume the connection to Cellular line only mode (If you do cellular phon
Summary of the content on the page No. 20
Link to Cell 7-digit phone number when making cellular – will be displayed on the handset calls. momentarily. The handset can be used once is displayed. Handset 1 MMENU N # 6 3 3 When you use the landline again 2 Enter the 3-digit area code. Before connecting the telephone line to the R To correct a digit, press MCLEAR N. base unit, select “Off” in step 2, “Cellular line 3 MSAVE N a MOFF N only mode (If you do not use the landline)”, page 19. Changing the Bluetooth PIN Cellular line selection (
