Summary of the content on the page No. 1
English • Français • Español
•
CLS 45i
Dual Speaker Amplified Cordless Phone
with Call-Waiting Caller ID
Operating Instructions
Ameriphone products are manufactured by
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive
Chattanooga, TN 37406
PHONE: (800) 426-3738
FAX: (800) 325-8871
email: ameriphonecs@plantronics.com
www.clarityproducts.com
© 2005 Plantronics, Inc.
76513.000
REV Spec B 04/05
Δ
Summary of the content on the page No. 2
Important Safety Instructions When using your telephone equipment, you are not sure of the voltage in basic safety precautions should always be your home, consult your dealer or followed to reduce the risk of fire, electric local power company. shock and injury to persons including the 10. Do not place anything on the power following: cord. Install the telephone where no 1. Read and understand all instructions. one will step or trip on the cord. 2. Follow all warnings and instructions 11.
Summary of the content on the page No. 3
operating instructions. Improper ADDITIONAL SAFETY NOTES FOR adjustment may require extensive CANADIAN USERS work by a qualified technician to restore the telephone to normal The following items are included as part operation. of the CS-03 Requirements. The standard E. If the telephone has been dropped connecting arrangement for the equip- or the case has been damaged. ment is CA11A. This product meets the F. If the telephone exhibits a distinct applicable Industry Canada technical change
Summary of the content on the page No. 4
(continued) Safety Instructions ment should be made by an authorized Safety Instructions For Canadian maintenance facility designated Batteries by the supplier. Any repairs or alterations Risk of explosion if battery is made by the user to this equipment, or replaced by an incorrect type. equipment malfunctions, may give the tele- Dispose of used battery according to communications company cause to request the instructions. the user disconnect the equipment. Use only the following typ
Summary of the content on the page No. 5
Contents Deleting Selected Caller ID Important Safety Information . . . . . . . . . . . . . . . . . . 20 Instructions _____________ ii Deleting All Caller ID Information 21 Additional Safety Notes for Canadian Users. . . . . . . . . . . . . . . iii Saving Caller ID Information To Memory. . . . . . . . . . . . . . . . . . . . . 20 Safety Instructions for Batteries. . iv Receiving Call Waiting Caller ID . 21 For Your Information _______ 2 Speed Dial and Warranty Service . . . . . . . . .
Summary of the content on the page No. 6
For Your Information Thank you for selecting the CLS45i Dual-speaker Amplified Cordless Telephone from Ameriphone. These operating instructions and quick-reference guide provide the information you need for safe, efficient use of the CLS45i. Read this document thoroughly before using your telephone and keep it nearby for easy reference. Warranty Service Your telephone is designed to provide years of quality service. However, if there is a malfunction Handset and the Troubleshooting recom
Summary of the content on the page No. 7
About your new CLS45i ® The CLS45i is the flagship of the Ameriphone too far from your base unit, noise increases. If you product line. It has been custom-engineered with an pass the range limits of the base unit, your call will unprecedented array of features to provide years be terminated. of convenience and assistance. It is powered by the latest technology yet thoughtfully designed for The CLS45i has both Caller ID and Call Waiting ease-of-use, especially for people who have trouble C
Summary of the content on the page No. 8
Features – Handset The CLS45i has an extensive array of features. For added convenience and ease of use, there Included among them are: is a tactile nub on the #5 dialing key and tactile • Amplification up to 40dB symbols on the memory and function keys on • Hands-free Communication the base. • Caller ID (if subscribed) • Intercom Since most of the features are available on • Memory Dialing both the handset and the base, let’s first look • Speakers for Three-way conference calling at the ha
Summary of the content on the page No. 9
Features – Handset The following controls and indicators are on the cradle, by pressing TALK. the face of the handset. b. To insert pauses into numbers: When storing numbers into memory, Keypad. The keypad on the handset is press REDIAL to insert pauses when backlit while in use. necessary, such as when entering a TALK button. Press to turn the hand- sequence of numbers (calling card or set ON and OFF. It can be used to answer, credit card number). You may also be place or end a call
Summary of the content on the page No. 10
Features – Handset into memory locations. use with optional remote devices such as an SPEAKER button. Pressing this button Ameriphone ER Pillow Switch or Air Switch. turns the handset speaker On and Off. It VOL slide switch. When AMPLIFY on can also be used to answer incoming calls. the handset is Off, this volume control pro- For best results, after turning this function vides amplification from 0 to 18dB. When On and the handset is out of the cradle, AMPLIFY is On, the volume control a
Summary of the content on the page No. 11
Features – Handset HEADSET jack. 2.5mm jack to allow the RING FLASHER. This red light, located use of a headset. Your handset, when connected on the top right back corner of the handset, to a headset (not included) will provide flashes when your telephone is ringing. you with hands-free communication. In the NEW CALL / IN USE indicator. event you wish to purchase a headset for Located at the top right-front corner of your CLS45i, please contact Plantronics at the earpiece, it flashes
Summary of the content on the page No. 12
Features – Base POWER (also Low Battery) indicator (red/green) IN USE light (green) CHARGE indicator (red) Base Faceplate SPEAKER GRILLE ANTENNA MEMORY buttons KEYPAD buttons PROG button INTERCOM (and Page) button FLASH button REDIAL button SPEAKER button MUTE button VISUAL RINGER SPEAKER VOL slide control PHONE NUMBER DIRECTORY 8
Summary of the content on the page No. 13
Features – Base Features and controls on the faceplate (top) when storing numbers. It lets you program of the base. numbers up to 32 digits. See additional description on page 5. POWER (also Low Battery) indicator. SPEAKER button. Backlit button lights up This light is the left most of three lights when Speaker is turned On. Press it and it above the keypad. It signals you to alert you provides hands-free communication with to the status of the backup batteries and adjustable volume. the AC
Summary of the content on the page No. 14
Features – Base Controls on the right side. RING TONE. Slide to set ringer tone to “L” AMPLIFIER OFF ON. This switch deter- (low) or “H” (high). mines the initial state of the amplification on RINGER. Slide to set ringer loudness to the handset. It always returns the handset to “OFF”, “L” (low), “M” (medium) or “H” whichever position the switch is set. When Off, (high). the handset starts calls in non-amplified mode. EXT SPK OUT (Audio) jack. This When On, the handset starts calls in ampli
Summary of the content on the page No. 15
Installing and Using Your CLS45i There are six (6) steps involved in setting up your CLS45i. 1. Install included battery pack into handset. 2. (Optional) Insert four AA alkaline batteries (for backup in case of AC power outage) into base. 3. Decide if you want the telephone to sit on a desk/tabletop or hang on the wall (if on the wall, follow Instructions for Wall Mounting) 4. Plug the telephone line cord into the phone base and telephone wall jack 5. Plug the electrical adapter into a
Summary of the content on the page No. 16
Installing and Using Your CLS45i To maximize the battery charge, place the Chart 1 indicates how to read the lights and handset back into the cradle when not in use indicators on the base to determine the status and each night. of the batteries and AC power. When out of the cradle, the battery typically Connecting Your holds a charge for several days, depending upon use. Telephone Set the dial mode switch to T (tone) if you Maximizing Handset Battery Life have touch tone service. Set the s
Summary of the content on the page No. 17
Installing and Using Your CLS45i Desktop Use To use as a desk phone, remove the wall mounting bracket: 1. Remove the handset and turn the phone over so that the bottom is facing you. 2. Push the bracket in and down firmly until you feel it snap out of its mounting slots . 3. Place the base on any desired and suitable location. The small rubber pads on the bot- tom of the phone will help keep the phone in place. Wall Mounting The wall mounting bracket is already installed on your CLS45i f
Summary of the content on the page No. 18
Installing and Using Your CLS45i 4. Press UP ( s) or DOWN ( t) to change Setting Up Caller ID the level. The Caller ID SETUP procedure begins only 5. Press INTERCOM to select your after the handset is fully charged. preference. 6. Press UP ( s) or DOWN ( t) to go to the Enter SETUP Mode next menu. NOTE: In SETUP, if there is no input within 30 seconds, the program will default to the Setting Time and Date last selection in that mode (e.g., Language) and The time-and-date stamp is automa
Summary of the content on the page No. 19
Installing and Using Your CLS45i minute digits are set, AM/PM will flash. NOTE: With Auto-Talk Off, picking up the 11. Press UP ( s) or DOWN ( t) to for either handset from the cradle does not answer the AM or PM. call. You will need to press TALK or SPEAKER 12.Press INTERCOM once to select. After AM to answer the call. or PM is selected, the time/date digits will 1. Press and hold CHANNEL for three (3) be blanked. seconds to enter the SETUP mode. 13.Press INTERCOM once to display the 2. Pr
Summary of the content on the page No. 20
Installing and Using Your CLS45i Press INTERCOM to confirm. When the PLACING CALLS FROM THE BASE WITH area code is confirmed, the entered dig- THE HANDSET EITHER IN OR OUT OF its move to the far left and change from THE CRADLE (USING THE BASE AS A flashing to steady On. SPEAKERPHONE) Press UP ( s) or DOWN ( t) to go to the 1. Press SPEAKER next menu. 2. The SPEAKER button lights up E6 To set up your CLS45i again, press CHANNEL 3. Listen for the dial tone A A D D B B E E and hold it down for
