Summary of the content on the page No. 1
Quick start guide
AT3211-2
DECT 6.0 dual handset cordless
telephone with caller ID/
call waiting
Summary of the content on the page No. 2
Installation preparation You must install and charge See pages 5-6 the battery before using the STOP! for easy instructions. telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telep
Summary of the content on the page No. 3
Telephone base installation Install the telephone base as shown below. 6. Plug the large end 5. Plug the other end of the power adapter of the telephone line into a power outlet cord into a telephone not controlled by a wall jack. wall switch. If you have DSL high speed Internet service, a DSL filter (not included) is required. 1. Plug the small end of the power adapter into the power jack on the bottom of the . Route the telephone telephone base. line cord through the channel.
Summary of the content on the page No. 4
Charger installation Install the charger as shown below. . Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch. 1. The small end of the power adapter has been already plugged into the jack on the bottom of the charger at the factory. Check to make sure it clicks firmly into place. IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, please call the appropriate number listed
Summary of the content on the page No. 5
Battery installation & charging Install the battery as shown on the next page. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 5 of the user’s manual for battery operating times. If the screen is blank, you n
Summary of the content on the page No. 6
Battery installation & charging Step 1 Step 2 Plug the battery Align the cover flat connector securely against the battery into the socket compartment, then inside the handset slide it upwards battery compartment, until it clicks into matching the color- place. coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light is on when chargi
Summary of the content on the page No. 7
Quick reference guide - handset qCID/VOL PLAY/MENU/SELECT Press qCID to display caller ID Press to play voicemail messages. history. Press to show the menu. Press to scroll down while in While in the menu, press to menus. select an item or save an entry or While entering names or setting. numbers, press to move the CHARGE indicator cursor to the left. On when the handset is charging Press to decrease the listening in the telephone base or charger. volume when on a call. ERASE SKIP Pre
Summary of the content on the page No. 8
Quick reference guide - handset Main menu Main menu >Highlights a menu item. DIRECTORY CALL LOG RINGER VOLUME >DIRECTORY CALL LOG RINGER TONE KEY TONE LCD LANGUAGE SET DATE/TIME CLR VOICEMAIL SET VOICEMAIL HOME AREA CODE Menu Using menus Press PLAY/MENU/SELECT to show the first menu item, DIRECTORY. Press qCID or p to scroll through menu items. Press PLAY/MENU/SELECT to select or save changes to a highlighted menu item. Press OFF/CLEAR to cancel an operation, back up to the previous menu
Summary of the content on the page No. 9
Quick reference guide - telephone base VOICEMAIL indicator IN USE indicator Flashes when you have new On when the handset is voicemail. Voicemail service in use or when you are is offered by your local registering a handset. telephone company. Flashes when another telephone on the same line is in use, or when you are FIND HANDSET de-registering handset(s) Press to make handsets from the telephone base. beep so you can locate Flashes quickly when there them. is an incoming call.
Summary of the content on the page No. 10
www.telephones.att.com © 2009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 4 AT&T 09/09.
