Summary of the content on the page No. 1
User guide
CookSurface
CG363ML & CG363MLD models
Guide de l’utilisateur
CookSurface
Modèles de série CG363ML et CG363MLD
US CA
Summary of the content on the page No. 2
WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the appliance. WHAT TO DO IF YOU SMELL GAS Do not try to light any appliance. Do
Summary of the content on the page No. 3
1 Contents US CA Introduction 3 Safety and warnings 4 Using your CookSurface 8 Cooking guidelines 11 Care and cleaning 14 Sound preference settings 18 Troubleshooting 20 Alert codes 22 Warranty and service 25 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local
Summary of the content on the page No. 4
US CA
Summary of the content on the page No. 5
3 Introduction US CA Introducing your CookSurface Congratulations on your new purchase. The Fisher & Paykel CookSurface is the ultimate in gas cooking, giving you the speed of gas, the precision and simplicity of electronic control, and the easy-care elegance of a ceramic glass surface. Your CookSurface has a number of features, including a constant flame safety system, automatic cool-down responses, hot warning indicators, and audio and visual feedback through the electronic interface and
Summary of the content on the page No. 6
4 US Safety and warnings CA Your safety is important to us. Please read this information before using your CookSurface. WARNING! Explosion Hazard Do not use water on grease fires. A violent steam explosion may result. Smother fire or flame or use dry chemical or foam type extinguisher. Do not use the appliance to heat unopened food containers, such as cans. This will cause the container to burst and could result in injury. Do not store flammable materials such as gasoline near the applian
Summary of the content on the page No. 7
5 Safety and warnings US CA WARNING! Electrical Shock Hazard Before doing any user maintenance, locate the wall power outlet and disconnect the appliance from the power supply and turn off the gas supply at the shut-off valve. This appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded power outlet. Do not under any circumstances cut or remove the grounding prong from this plug. Failure t
Summary of the content on the page No. 8
6 US Safety and warnings CA Important safety instructions! Have your appliance installed and properly grounded by a qualified installer in accordance with the installation instructions. Ensure that a manual gas shut-off valve is installed in a location accessible after installation. Be sure to have the installer show you how to turn off the gas and electrical supply. Use this appliance only for its intended purpose as described in this user guide. This appliance cannot be used in the
Summary of the content on the page No. 9
7 Safety and warnings US CA Important safety instructions! Do not obstruct the flow of combustion and ventilation air to the appliance. The Governor of California is required to publish a list of substances known to the State of California to cause cancer or reproductive harm and requires businesses to warn customers of potential exposures to such substances. WARNING!: Gas appliances contain or produce substances which can cause death or serious illness and which are known to the State
Summary of the content on the page No. 10
8 US Using your CookSurface CA Operating the CookSurface 1 Press the on/off 2 Press the control dial. 3 The dial and the pan supports power button. A tone will sound. will rise. The burner-ready light will then glow for four seconds. 4 While the burner-ready light is glowing, 5 Place your pan on the pan supports. turn the dial clockwise to light the gas. Note: if the burner-ready light goes out before you light the gas, press the dial again.
Summary of the content on the page No. 11
9 Using your CookSurface US CA Operating the CookSurface 6 Turn the dial to accurately adjust the flame. 7 To stop cooking, press the dial. The gas will be shut off, and the pan supports will stay Note: the flame will not go out if you keep raised. If they’re hot, the hot warning light turning the dial down. will glow. 8a To relight the burner when the pan supports are raised: Press the dial. The burner-ready light will glow for four seconds. While the burner-re
Summary of the content on the page No. 12
10 US Using your CookSurface CA ...3 seconds 8b To lower the pan supports automatically after you have finished cooking, press and hold the dial for three seconds while the burner is lit. The flame will go out and the pan supports, if cool enough, will lower. If the supports are hot, the hot warning light will glow and the control display will show a descending sequence of lights until the burner has cooled. This can take between 30 seconds and 30 minutes depending on the flame setting
Summary of the content on the page No. 13
11 Cooking guidelines US CA Important! Do not use pans with jagged edges or drag pans across the ceramic glass surface as this can scratch the glass. Do not drag pans backwards and forwards across the pan support pins, burner heads and trim rings eg when placing and removing pans or sauteing food, as this can damage them, especially the coating on the pan support pins. Cooking tips Match the size of the pan to the burner. You may not need to change burners during cooking be
Summary of the content on the page No. 14
12 US Cooking guidelines CA Searing steak To cook juicy flavorsome steaks: 1 Stand the meat at room temperature for about 20 minutes before cooking. 2 Heat up a heavy-based frying pan. 3 Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then lower the meat onto the hot pan. 4 Turn the steak only once during cooking. The exact cooking time will depend on the thickness of the steak and how cooked you want it. Times may vary from about 2 – 8 minutes
Summary of the content on the page No. 15
13 Cooking guidelines US CA Using a wok Important! Use your wok only on the wok burner. When using a wok, always use the wok stand. Make sure the wok stand is fitted correctly over the raised pan supports. (see Fig.2) Do not use a wok larger than 16” (40 cm) diameter. Check that your wok is adequately supported by the wok stand. Make sure the wok does not push any other pans aside. This could make them unstable, or deflect heat onto nearby walls or the countertop. Fig.2
Summary of the content on the page No. 16
14 US Care and cleaning CA Your CookSurface has been designed to combine the easy-care cleaning of ceramic glass with the performance of gas. Important! Read through the ‘Safety and warnings’ and ‘Care and cleaning’ sections carefully before doing any cleaning or maintenance. To avoid the risk of electrical shock or burners being accidentally turned on during cleaning, make sure you turn the CookSurface off before cleaning by pressing the on/off power button. Remember that the CookSurf
Summary of the content on the page No. 17
15 Care and cleaning US CA Melts and spills that require immediate attention Anything that melts onto the ceramic glass surface or food spills with a high sugar content may cause pitting of the ceramic glass surface if left there to cool. Using extreme caution, remove these spills immediately with a fish slice, palette knife or cooktop scraper. Take care when working around the hot surfaces and ensure you do not scratch the glass or damage the trim rings or pan support pins. Examp
Summary of the content on the page No. 18
16 US Care and cleaning CA Cleaning the pan supports (the pan support pins and burner head) Important! Do not wash pan supports in a dishwasher or use dishwashing machine detergent to clean these parts as this may damage the easy-clean coating. After reassembling any burner, always lower the burner before using the CookSurface to check it has been reassembled correctly. If food spills have burnt onto the pan supports, the supports may not lower when the control dial is pressed and he
Summary of the content on the page No. 19
17 Care and cleaning US CA To clean the burner head 1 Lift out the burner head and clean with a cloth or scourer. The burner head gets much hotter than the pan support pins and for this reason it is not finished with an easy-clean coating. If cooking splatter and spills get burnt onto the burner head, scrub with a mildly abrasive cleaner and a soft cloth. Ceramic cooktop cleaner is suitable for this. 2 Replace the clean burner head. 3 Press the on/off power button to turn the Cook
Summary of the content on the page No. 20
18 US Sound preference settings CA The CookSurface has three pre-set sound preference settings (tones, tone volume, feedback tones). Changing the settings To change the settings, follow these steps. ...2 seconds ...3 seconds 1 Hold down the on/off power button 2 Firmly press both the on/off power button and the nearest burner control dial for three for two seconds. This sets the seconds. keylock. Once you are in the Sound preference 3 Each setting has two options (see table following
