Summary of the content on the page No. 1
Konica 7013
Plain-paper digital Fax/Copier/Printer
Operating Instructions
Summary of the content on the page No. 2
Welcome … i
Summary of the content on the page No. 3
® Statement As an Energy Star partner, Konica has determined that this product meets the Energy Star guidelines for energy efficiency. The Konica 7013 carries the CE mark. This indicates that the machine complies to EN55022 1998 (Class B), EN55024 1998, EN61000-3-2 1995 +A1 +A2, and EN61000-3-3 1995 in accordance with EEC directive 89/336/EEC. Energy saving In addition the machine has been safety tested to IEC60950 1991 +A1 +A2 +A3 +A4 in accordance with EEC directive 73/23/EEC. Your machine can
Summary of the content on the page No. 4
Before using your Konica fax machine Clean Where to set up your fax machine Dust buildup can damage your fax. Periodically Follow these guidelines when setting up your fax machine: clean your fax machine as described in the operating instructions. Do not use a dust cover, which can cause damaging overheating. Away from direct sunlight To avoid overheating, set up your fax machine away from direct sunlight or a heater. Near a phone jack Your fax machine uses a standard (modular) tele- phone jack,
Summary of the content on the page No. 5
Power requirements General Precautions Plug in the power cord Never disassemble your fax machine! Plug the power cord carefully and completely into a Disassembling your fax machine can cause serious wall outlet. Do not leave any portion of the electrical injury to you and damage to your fax. If service is cord’s metal plugs exposed. Doing so could cause a required, call your authorised Konica dealer. fire and poses a risk of electrical shock. Do not share an extension cord Keep away from liquids
Summary of the content on the page No. 6
Do not put furniture or equipment on Storing and handling toner and drum cartridges the power cord To avoid damage to your fax machine and to assure the best performance possible, Do not put anything on or over the electrical power follow these guidelines when storing and handling toner and drum cartridges: cord, and do not route the power cord under rugs or carpets. Doing so can damage the power cord or fax, and can cause fire or electrical shock. Store the cartridge Store the cartridge at a co
Summary of the content on the page No. 7
This page is intentionally blank. vi
Summary of the content on the page No. 8
Welcome to your Konica fax machine! These instructions are divided into the following sections. Find your serial number and write it down • “Getting started” (page 1.1) describes how to set up your Please note that your machine’s serial machine, operating tips and some important settings that you number is located on the bar code label should perform before you use your machine. as shown on the drawing at right. Use the blank at the bottom of this “Basic operations” (page 2.1) describes the b
Summary of the content on the page No. 9
Table of Contents Before using your Konica fax machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Sending a fax using the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4 Where to set up your fax machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Sending a fax using the platen glass . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5 Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 10
Broadcasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.9 Changing redial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5 Sending a broadcast fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.9 Settings for copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.6 Delayed transmission . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 11
Getting started This chapter describes how to set up your machine, operating tips and some important settings before you use your machine Packaging contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Parts of your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Control Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 12
SOFT KEY S EA N V E IN RG GY M CO OD PE Y/FAX REDIAL SORT / PAUSE DIALING FAX© OPTION COMBINE SECURITY MEMORY TX BYPASS REPORT DIAL PREFIX TTI TX FLASH P C AO G V E ER /M CO AN LL ITOR NEGA ONLINE / POSI Getting started Packaging contents Parts of your machine Note: Any terms used here that are unclear to you right now will be explained in detail in the coming pages. 1 18 4 5 3 2 6 23 7 8 9 1 10 11 17 12 13 16 15 45 14 Control Panel — The keys you use to operate your machine. (See pages 67 8
Summary of the content on the page No. 13
Getting started AC power jack — Where you plug in the AC power cord. 10 Bypass tray — Open and use the bypass tray to use the paper that cannot 11 be set in the paper cassette. It can hold up to 50 sheets of paper. For details about paper capacity of the bypass tray, see “Specifications,” page AI.2. 25 Side cover — Open to fix a printout jam. 12 Side cover release — Pull this to open the side cover. 13 Top cover release — Pull up on this to open the top cover. 24 14 Recording paper size sticker
Summary of the content on the page No. 14
Getting started Control Panel Overview 12 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 COPY light — Glows when the machine is in the Copy mode. COPY COUNT — Pressing this key will make you see the number of total 1 7 printed pages on the LCD. FAX light — Glows when the machine is in the Fax mode. MONITOR/CALL — Pressing this key will turn the monitor speaker on or off. 2 8 When it’s on, it allows you to hear the call you’re making. When using this ALARM light — Glows wh
Summary of the content on the page No. 15
Getting started Numeric keypad — Just like the numeric keys on a regular tone-dialing DOCUMENT/RESOLUTION — 16 27 phone. Use these to dial phone and fax numbers and to enter numbers when In Fax mode: Pressing this key will toggle among the three resolution modes you’re setting up the machine. and grayscale. In Fax mode: Or, in Copy mode: Pressing this key will select the type of your document. 17 SPEED DIAL/TEL INDEX — Starts a speed-dialing operation, which you finish by COPY/FAX — Pressing th
Summary of the content on the page No. 16
LOCK UNLOCK Getting started Setting up Pick an installation spot Unlocking the mirror carriage Where should you install your fax machine? The location should be: Your fax machine is shipped with mirror carriage locking plate for protecting your machine’s mirror carriage during shipping. Clean — Dust buildup can damage your machine. (However, do not use a cover!) In the open — Allow at least 30 cm of clearance around your machine. Be sure Important: Do not turn the power on until after you ha
Summary of the content on the page No. 17
Getting started Installing the printing supplies Unpack a new toner cartridge from its Your fax prints incoming faxes and copies with a reliable 600 dpi print engine. Your 3 carton. Then, holding the toner car- fax requires two types of printing supplies (sometimes also called consumables): tridge with both hands, slowly shake it The drum cartridge — It yields 20,000 “normal” A4-sized printouts (see to distribute the toner evenly inside the “Specifications,” page AI.2). By “normal,” we’re refe
Summary of the content on the page No. 18
Getting started Plug in and power up Gently clean the LED print head 7 using the cleaning paper included in Plug one end of the telephone line cord into the LINE jack on the machine’s 1 the toner cartridge carton box. rear side and the other end into a standard telephone wall jack. For best print quality, you should Plug the non-pronged end of the AC power cord into the AC power cord jack clean the LED head every time you 2 on the right rear side of the machine and the pronged end into a 230 V e
Summary of the content on the page No. 19
Getting started Turning off the transport mode Loading paper Important: After unlocking the mirror carriage (see page 1.5), you must turn the Acceptable paper size and cassette capacity transport mode off by following procedures. Paper source Paper type Paper size Capacity When the machine is in the transport mode, the LCD shows: 1 Paper cassette Plain paper* A4 , A5 , F4 500 sheets Mirror Locked A4 , A5 , A6 , F4 , 1 Plain paper* Letter , Legal , Half-letter , 50 sheets 2 Bypass Tray Executive
Summary of the content on the page No. 20
Getting started Helpful Tip: The paper level indicator on the While pressing the release lever, 2 front paper cassette lets you see slide the paper length guide to the how much paper is in the cassette position for the paper size you without your having to open the cas- want to use. sette. When you see the paper level Press down the paper lifting plate. indicator drop (i. e., show more blue 3 area), make sure you have a supply Paper level of paper nearby. Then, when you see indicator the “Please
