ページ1に含まれる内容の要旨
EPSON Stylus Photo 700
paper support extension
Accessories
edge
paper support
guides
Ink Cartridges
printer cover
Cartridge Part number
Black S020093
Color S020110
control
panel
Media
output tray
Media name Size Part number
EPSON 360 dpi Ink Jet Paper Letter S041060
A4 S041059
EPSON High Quality Ink Jet Letter S041111
Paper A4 S041117
output tray
EPSON Photo Quality Ink Jet Letter S041062
extensions
Paper A4 S041061
Legal S041067
ink cartridge
paper out
EPSON Photo Quality Glossy Letter S
ページ2に含まれる内容の要旨
EPSON Stylus Photo 700 Ink Cartridge Printer Specifications Black ink cartridge Color ink cartridge Specification (S020093) (S020110) Printing Color(s) Black Cyan, Magenta, Yellow, Light Magenta, Light Cyan Printing method EPSON’s exclusive drop-on-demand ™ Micro Piezo ink jet technology Print capacity* 540 pages/A4 (ISO/IEC 220 pages (A4, 360 dpi, 10561 Letter Pattern at 5% duty each color) Nozzle configuration 360 dpi) Cartridge life 2 years from production date (if unopened) Black 32 nozz
ページ3に含まれる内容の要旨
EPSON Stylus Photo 700 Paper Paper type Size Paper types Thickness Weight Single sheets Letter (8.5 × 11 inches) Plain bond paper and special ink jet 0.003 to 0.004 inch 17 to 24 lb (64 to 2 Legal (8.5 × 14 inches) papers distributed by EPSON (0.08 to 0.11 mm) 90 g/m ) for plain Statement (5.5 × 8.5 inches) for plain bond paper bond paper Executive (7.5 × 10 inches) A4 (210 × 297 mm) A5 (148 × 210 mm) B5 (182 × 257 mm) Transparencies, Glossy Letter (8.5 × 11 inches) Transparencies, glossy pap
ページ4に含まれる内容の要旨
EPSON Stylus Photo 700 Printable area A A B-L B-R B-L C B-R EPSON Panoramic Photo Paper A: The minimum top margin is 0.12 inch (3.0 mm). B-L, The minimum left margin is 0.12 inch (3.0 mm). B-R: The minimum right margin is 0.54 inch (14.0 mm). C C: The minimum bottom margin is 0.12 inch (3.0 mm). single sheets/index cards Note: Always load paper into the sheet feeder short edge first. However, envelopes should be loaded long edge first. A Mechanical B-L B-R Paper feed C method Friction envelop
ページ5に含まれる内容の要旨
EPSON Stylus Photo 700 Hardware initialization Electrical When the printer is turned on, the printer mechanism is Specification 120 V Model 220- 240 V Model* initialized and the input data buffer and print buffer are Input voltage 99 to 132 V 198 to 264 V cleared. Printer settings are returned to their default values. range** However, the printer mechanism is not initialized if the printer is turned on within ten seconds after turning it off. In Rated frequency 50 to 60 Hz range this case,
ページ6に含まれる内容の要旨
EPSON Stylus Photo 700 Serial interface B or A When an ink out light comes on, you need The printer’s built-in serial interface is based on the RS-423 to replace the ink cartridge. standard. This interface has the following characteristics: P The power light is on when the printer is Standard: Based on RS-423 on. The power light flashes when the printer Synchronization: Synchronous is receiving a print job or performing a maintenance operation such as cleaning a Bit rate:
ページ7に含まれる内容の要旨
EPSON Stylus Photo 700 4. Press the P power button to turn on the printer. The The printer moves the print head and begins charging the ink P power light flashes, the B and A ink out lights come on, delivery system. Charging can take up to two minutes. During and the ink cartridge holders move left to the installation this time, the P power light flashes, and the printer makes position. various sounds. Don’t turn off the printer or interrupt the charging process or you’ll use mo
ページ8に含まれる内容の要旨
EPSON Stylus Photo 700 Then select this Printing on Special Media Media Type setting For this media Load a maximum of in your printer name... this many sheets... software... Whether you print on plain paper or special media, you need to load it according to the guidelines in the table below. EPSON Ink Jet 10 (use a support Ink Jet Transparencies Transparencies sheet) Then select this 1 Media Type setting Use the Flip Horizontal option to reverse your image before you For this media Load
ページ9に含まれる内容の要旨
EPSON Stylus Photo 700 Warning: Replacing an Ink Cartridge If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Caution: To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause Installing the New Cartridge damage to your printer not covered by EPSON’s Once you have removed the empty cartridge, you’re ready to warranty. install the new one. Follow these step
ページ10に含まれる内容の要旨
EPSON Stylus Photo 700 2. Access the printer settings dialog box. Replacing an Outdated Ink Cartridge 3. Click the Utility tab (Windows) or the Utility button If an ink cartridge is more than six months old, you may need (Macintosh). You see the Utility menu. to replace it. How can you tell? You may notice that your printouts don’t look as good as they used to. If print quality 4. Click the Head Cleaning button. doesn’t improve after cleaning and aligning the print head, 5.
ページ11に含まれる内容の要旨
EPSON Stylus Photo 700 1. Turn off the printer, unplug the power cord, and Examining the Nozzle Check Pattern disconnect the printer cable. Examine the nozzle check pattern after printing it. It should 2. Remove all the paper from the sheet feeder. look something like this, with each of the six sections showing one of the ink colors: 3. Clean the exterior of the printer with a soft, damp cloth. Keep the printer cover closed so water doesn’t get inside. 4. Clean ink out of the printer’s inter
ページ12に含まれる内容の要旨
EPSON Stylus Photo 700 12 - EPSON Stylus Photo 700 3/98
