ページ1に含まれる内容の要旨
Epson Stylus CX4400 Series
Epson Stylus CX4400 Series Parts Accessories
Paper support
Ink Cartridges
Feeder guard
Color Part number
Scanner
Black 88
lid
Cyan 88
Magenta 88
Edge
Yellow 88
guide
Media
Control panel
buttons
Part
Paper name Size number
Epson Ultra Premium Photo Paper Borderless S041934
Output tray and
Glossy 4 x 6 inches
extension
Letter S041935
(8.5 x 11 inches)
Epson Bright White Paper Letter S041586
(8.5 x 11 inches)
Epson Premium Photo Paper Glossy Borderless S041808
4 x 6
ページ2に含まれる内容の要旨
Epson Stylus CX4400 Series Envelopes Specifications Size No. 10 (4.1 × 9.5 inches) Printing Paper type Plain bond paper Weight 20 lb (75 g/m²) to 24 lb (90 g/m²) Printing method On-demand ink jet Nozzle configuration Black: 90 nozzles Note: Color: 270 nozzles Poor quality paper may reduce the print quality and cause paper jams or other problems. If you have print quality problems, switch to a (90 each cartridge: cyan, magenta, higher grade paper. yellow) Do not load curled or folded paper. Pr
ページ3に含まれる内容の要旨
Epson Stylus CX4400 Series Scanning USB Interface Scanner type Flatbed color Standard Based on Universal Serial Bus Specifications Revision 1.1 Photoelectric device CIS Connector USB Series B Effective pixels 5,100 × 14,040 pixels at 1200 dpi Cable length Under 6.6 feet (2 meters) Document size 216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size Safety Approvals Output resolution 50 to 2400, 7200, and 9600 dpi Safety UL 60950-1 (50 to 2400 dpi in 1 dpi increments) CAN/CSA C22.2 No. 60950-1 Sc
ページ4に含まれる内容の要旨
Epson Stylus CX4400 Series 4. Press in the tab on the edge guide and slide it left. 6. Flip the feeder guard back. Follow these guidelines when loading paper: ❏ Don’t load paper above the arrow on the edge guide. 5. Insert the paper, printable side up, against the right side. ❏ Load the printable side face-up. It’s often brighter or whiter Then slide the edge guide against the paper. than the other side. (The printed side is whiter or brighter on some papers.) ❏ Always load the short edge fi
ページ5に含まれる内容の要旨
Epson Stylus CX4400 Series 3. Load up to 10 envelopes at a time, flap edge left, printable Selecting the Correct Media Type side up, against the right side. The table below lists the settings you should choose for your Load the flap edge left, paper in the printer software: printable side up Type or Media Type Paper setting Plain paper Plain Paper / Epson Bright White Paper Bright White Paper Epson Presentation Paper Matte Epson Ultra Premium Photo Paper Glossy Ultra Premium Photo Paper Glos
ページ6に含まれる内容の要旨
Epson Stylus CX4400 Series Copying Scanning a Photo or Document You can make copies using letter-size (8.5 × 11-inch) plain You can use your CX4400 Series to scan a photo or document paper or 4 × 6-inch photo paper. and save it on your computer or other device, or to fax or e- mail it to someone else. Copying a Document You can even restore faded color photographs or correct backlighting as you scan (see page 7 for details). 1. Make sure the CX4400 Series is turned on. The Epson Scan software
ページ7に含まれる内容の要旨
Epson Stylus CX4400 Series You see the EPSON Scan standby window: Checking the Print Head Nozzles If your printouts are faint or have gaps in them, some of the nozzles in the print head may be clogged or ink may be running low in one or more of the ink cartridges. Follow the steps below to check the print head nozzles: 1. Turn off the CX4400 Series. 2. Load letter-size paper in the sheet feeder. 3. Hold down the y Stop button as you press the P On button. Hold down both buttons until the P O
ページ8に含まれる内容の要旨
Epson Stylus CX4400 Series ❏ Macintosh OS X: Open the Applications folder and select Replacing Ink Cartridges EPSON Printer Utility 2. Select CX4400 Series in the printer list, click OK, and select EPSON Status Monitor. ❏ When the red B ink light flashes, one or more ink cartridges are low on ink. ❏ When the red B ink light stays on, you need to replace the cartridge(s). You’ll also see a message on your screen when you print telling you which cartridge is low or expended. (You cannot print
ページ9に含まれる内容の要旨
Epson Stylus CX4400 Series 1. Make sure the CX4400 Series is on and the red B ink light is 4. Press the y Stop button again. on but not flashing. ❏ If another cartridge is low or expended, it moves to the 2. Open the scanner and make sure its support locks in place. _ position. Press the y Stop button again to see if more cartridges are low or expended. ❏ If no other cartridges are low or expended, the print head moves to the replacement position. Caution: Do not touch any area shown below.
ページ10に含まれる内容の要旨
Epson Stylus CX4400 Series 7. Before you open the new ink cartridge package, shake it 11. Hold the scanner while you release the support. Then close four or five times. Then remove it from the package. the scanner. Caution: Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 8. Remove the yellow tape from the bottom of the ink 12. Press the y Stop button to begin charging the ink. This cartridge. takes about one and a half minutes. When it’s finish
ページ11に含まれる内容の要旨
Epson Stylus CX4400 Series You see the following: 6. Release the scanner support and close the scanner. 7. Repack the CX4400 Series in the original box or one of a similar size using protective material to keep it from moving inside the box. Keep the CX4400 Series level as you transport it. After transporting the CX4400 Series, remove the tape securing the print head, plug in the CX4400 Series, and turn it on. If you notice a decline in print quality, clean the print head (see page 7); if
ページ12に含まれる内容の要旨
Epson Stylus CX4400 Series 12 5/07
