ページ1に含まれる内容の要旨
Gebrauchs- und Montageanweisung
Induktions-Glaskeramik-Kochfeld
Instructions for fitting and use
Glass ceramic induction hob
Instructions de montage et d’utilisation
Table de cuisson vitrocéramique à induction
Gebruiks- en montage-instructies
Keramische inductiekookplaat
Istruzioni per uso e montaggio
Piano di cottura ad induzione in vetroceramica
Instrucciones para el uso y montaje
Encimera vitrocerámica per inducción
Instruções de uso e de montagem
Placa de cozinhar de indução em vitrocerâmica
ページ2に含まれる内容の要旨
GB Disposing of the packaging For your information... Please dispose of the packaging that came with your appliance in Please read this manual carefully before using your appliance. It an environmentally friendly way. Recycling in this way saves on contains important safety advice; it explains how to use and look resources and cuts down on waste. after your appliance so that it will provide you with many years of reliable service. Should a fault arise, please first consult chapter “What to do if
ページ3に含まれる内容の要旨
Safety instructions GB Safety instructions • Do not put kitchen foil or plastic onto the cooking zones. Keep Connection and operation everything which could melt, such as plastics, foil and in • The appliances are constructed in accordance with the particular sugar and sugary foods, away from the hot cooking relevant safety regulations. zone. Use a special glass scraper to immediately remove any • Fitting a mains socket, repairing and servicing the appliance sugar from the ceramic hob (when it i
ページ4に含まれる内容の要旨
Appliance description GB A p pl ia n c e d e s cr ip ti o n Hob Cooking zone The decorative design may deviate from the illustrations. Operating the hob with the touch keys The ceramic glass hob is operated with touch control sensor A. Induction cooking zone back left buttons. The touch keys are operated as follows: touch a symbol on the surface of the ceramic glass plate. A buzzer will indicate B. Induction cooking zone back right when the controls have been operated correctly. The touch C. Ind
ページ5に含まれる内容の要旨
Operation GB Operation The hob Operating time limit The hob is equipped with an induction cooking mode. An The induction hob has an automatic time limit function. induction coil underneath the glass ceramic hob generates an The duration of continuous use of each cooking zone depends on electromagnetic alternating field which penetrates the glass the cooking level selected (see chart), provided that the setting of ceramic and induces the heat-generating current in the pot base. a respective cooki
ページ6に含まれる内容の要旨
Operation GB Cookware for induction hobs Power settings The cookware used for the induction cooking zone must be made The heating power of the cooking zones can be set at various of metal, have magnetic properties and a sufficient base area. power levels. In the chart you will find examples of how to use each setting. Only use pots with a base suitable for induction. Cooking level Suitable for Suitable cookware Unsuitable cookware 0 Off, using remaining heat Enamelled steel pots with thick Pots
ページ7に含まれる内容の要旨
Operation GB Operating the buttons The controls described here expect the pressing of a (selection) button to be followed by the pressing of a subsequent button. The pressing of a subsequent button must always commence within 10 seconds, otherwise the selection will be deleted. The plus and minus buttons can be touched individually or be permanently pressed. Switching on the hob and cooking zones 1. Press the on/off button until the power setting displays indicate 0. The stand-by dots will blin
ページ8に含まれる内容の要旨
Operation GB STOP function The cooking process can be briefly interrupted with the STOP function, e.g. if the doorbell rings. The STOP function must be released in order to continue cooking at the same power level. If a timer has been set it will pause and will then continue. This function is only available for 10 minutes for reasons of safety. The hob will then be switched off. 1. Pots and pans are on the cooking zones and the required power levels have been set. 2. Press the STOP button . Th
ページ9に含まれる内容の要旨
Operation GB Automatic switch-off (timer) The automatic switch-off device is used to automatically switch off any cooking zone after a stipulated period of time. Cooking times ranging from 1 minute to 99 minutes can be set. 1. Switch on the hob. 2. Switch on one or more cooking zones and set the required power set- tings. 3. Press the timer selection button . The standby dot of the timer will light up. Press the button again until the timer indicator lamp of the required cooking zone blinks. Im
ページ10に含まれる内容の要旨
Operation GB Automatic boost function Parboiling takes place at power level 9 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (1 to 8). When using the automatic boost function only the simmering setting with which the food is to be cooked through needs to be selected since the electronic unit switches down automatically. The automatic boost function is suitable for dishes which are cold initially and are then he
ページ11に含まれる内容の要旨
Operation GB Power boost setting (cooking zones marked with a P) The power boost setting makes additional power available for induction cooking zones. A large quantity of water can be brought to the boil very quickly. The power boost setting operates for 10 minutes, after which the power level is automatically reduced to cooking level 9. 1. A cooking zone must be switched on. The stand-by dot of the cooking zone must light up. It may be necessary to press the cooking zone selection button. 2.
ページ12に含まれる内容の要旨
Cleaning and Care GB Cleaning and Care Specific soiling Heavy soiling and stains (limescaling and shiny, mother-of- pearl-type stains) can best be removed when the hob is still • Before cleaning, switch off the hob and let it cool down. slightly warm. Use commercial cleaning agents to clean the hob. • Never clean the glass ceramic hob with a steam cleaner or Proceed as outlined under Item 2. similar appliance! First soak food which has boiled over with a wet cloth and • When cleaning make sur
ページ13に含まれる内容の要旨
What to do if trouble occurs GB What to do if trouble occurs Error code E2 is indicated? The electronic unit is too hot. Check the installation of the hob. Make sure that there is sufficient ventilation. See the section on thermal cut-off. Interference with and repairs to the appliance by unqualified persons are dangerous as they can result in electric shock, or short circuit. Do no interfere with or try to repair the appliance; Error code U400 is indicated? this could cause injury and damage
ページ14に含まれる内容の要旨
Instructions for assembly GB Instructions for assembly Safety instructions for kitchen unit fitters Installation • Veneers, adhesives and plastic surfaces of surrounding Important furniture must be temperature resistant (>75°C). If the veneers • Remove any transverse strips underneath the worktop at least and surfaces are not sufficiently heat resistant they can in the area of the worktop cut-out. become deformed. • Avoid excessive thermal development from below e.g. from a • Ensure that all liv
ページ15に含まれる内容の要旨
Instructions for assembly GB Clips • Drive the clips into the worktop cut-out at the intervals indicated. It is not necessary to adjust the height due to the horizontal stop motion device. • Important! The horizontal drive of the clips must be flush with the worktop (avoid the risk of breaks). • Position the hob according to the Type illustration on the left side (a), align it (b) and insert the clips (c). • Screws may be used to fasten the clips. Important! There is a risk of breakage if the ho
ページ16に含まれる内容の要旨
Instructions for assembly GB Bracket • Insert the hob and align it. • From the bottom, insert the brackets with screws in the holes provided for fastening the brackets, align the brackets and screw them tight. • Tighten the screws with a hand screw driver only; do not use a battery-operated screw driver. • In the case of thin worktops make sure that the brackets are correctly positioned. Type A metric screw must be used on the bracket to balance it. Important! There is a risk of breakage if th
ページ17に含まれる内容の要旨
Instructions for assembly GB Electrical connection Technical data • The electrical connection must be carried out by a Dimensions qualified electrician who is authorised to carry out such Hob Height/ Width/ Depth mm 50 x 600 x 510 work! Cooking zones • Statutory regulations and the connection specifications issued Back left Ø cm / kW 18/ 1.85 (2.5)* by the local power supply company must be strictly observed. Front left Ø cm / kW 21/ 2.3 (3.2)* • When connecting the appliance it must be ensured
