ページ16に含まれる内容の要旨
Use Turning the combiset On/Off Residual heat indicator The residual heat indicator will go out ,Do not leave the appliance once the combiset has cooled to a safe unattended while in use. temperature. To turn the combiset on turn the control As long as the residual heat knob clockwise a to the desired power indicator is lit do not touch or place level. any heat sensitive items on the To turn the combiset off turn the control burner. Danger of burns, and fire knob counterclockwise b to "0". hazar
ページ17に含まれる内容の要旨
Use Settings Use for Power level* Melting butter, chocolate, etc. 1-2 Dissolving gelatin Prepare yogurt Warming small quantities of food or liquid 1-3 Keeping delicate dishes warm Cooking rice, Thawing frozen vegetables Warming liquid or half-set foods 2-4 Thickening sauces, e.g., hollandaise sauce Cooking rice pudding Defrosting frozen foods 3-5 Steaming vegetables, fish, etc. Cooking pasta, soups, etc. Steaming grains Boiling and continued cooking of large quantities of food 5 - 6 Gently sauté
ページ18に含まれる内容の要旨
Use Auto-heat Activating Auto-heat When Auto-heat has been activated, ^ Turn the control knob the burner switches on automatically at counterclockwise as far as it will go the highest setting and then switches to and hold until an A appears in the the continued power level which was display. selected. The "heat-up" time depends ^ Turn the control knob clockwise to on which continued power level has the desired continued power level. been chosen (see table). Once Auto-heat has been activated the
ページ19に含まれる内容の要旨
Use Booster function To activate Booster I The burner is equipped with a booster ^ Turn the control knob past power function to temporarily increase the level 9 to BI/II, then turn back to level power level. This boost is intended to 9. quickly bring large quantities of water I appears in the display and the B to the boil, e.g. cooking pasta. When indicator lights up. the Booster is activated the burner will operate with extra power for 10 To activate Booster II minutes. ^ Turn the control knob
ページ20に含まれる内容の要旨
Use Keep warm Tips This function can be used for keeping – Cover the pan with a lid. food warm right after it has been – It is not necessary to stir the food cooked. It is not for reheating food while it is being kept warm. which has already cooled. – Nutrients are lost when food is Once activated the keep warm function cooked, therefore try to keep the will switch off automatically after 2 warming time to a minimum. hours. 20
ページ1に含まれる内容の要旨
Operating and Installation
Instructions
Ceramic combiset with Induction
CS 1212
CS 1221
To prevent accidents and en-CA
machine damage,
read the Operating Manual
before
installation or use. M.-Nr. 07 353 950
ページ2に含まれる内容の要旨
Contents IMPORTANT SAFETY INSTRUCTIONS.................................4 Description of the unit..............................................9 CS 1212..........................................................9 CS 1221.........................................................10 Display..........................................................11 Burner data ......................................................11 Before using for the first time.......................................12 Induction...
ページ3に含まれる内容の要旨
Contents SAFETY INSTRUCTIONS FOR INSTALLATION.........................30 Installation ......................................................33 Installation dimensions .............................................34 CS 1212 ......................................................34 CS 1221 ......................................................35 Cutout..........................................................36 Installation of multiple appliances.....................................37 Attach the sp
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Children WARNING- When using your Activate the Child Safety Lock so ~ appliance follow basic that the combiset cannot be turned on precautions, including the inadvertently. following: Children should not be left ~ Read all instructions before unattended in an area where the installation or use to prevent appliance is in use. Never allow injury and appliance damage. children to sit or stand on any part of the appliance. This appliance conforms to all Caution: Do not
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Technical Safety Install the appliance so that the ~ power cord does not come into contact Installation, repair and maintenance ~ with any portion of the cooktop which work should be performed by a Miele may become hot during use. authorized service technician. Work by unqualified persons could be Before servicing, disconnect the ~ dangerous and may void the warranty. appliance from the main power supply. Before installing the combiset, Do not operate any appliance
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Do not cook on a broken combiset. Safety ~ Any breakages or cracks in the ceramic Individuals with a pacemaker or ~ surface of the appliance are defects similar medical device: and must be treated as such. If the Please note that an electromagnetic combiset should break, cleaning field develops when the combiset is solutions and spills may penetrate the turned on. It is not likely that this will broken combiset and create a risk of affect the pacemaker or similar de
ページ7に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Do not store items on the appliance Be aware of loose fitting or hanging ~ ~ when not in use. Items could melt or garments when operating the catch fire from residual heat or if the appliance, they may present a fire appliance is turned on inadvertently. hazard. Always switch the cooking zone(s) off Never leave a combiset unattended ~ after use. at high settings or when cooking with oil Flammable materials should not be or fat. Overheated oil could ignite. ~ stored
ページ8に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Pot and pan handles should be Any spills should be removed as ~ ~ turned inward and not extend over the quickly as possible to prevent them countertop to reduce the risk of burns, from burning on and becoming difficult ignition of flammable materials, and to remove. spills. The manufacturer cannot be held Do not use pots or pans with ~ liable for damage caused by pronounced edges or ridges on the non-compliance with these ceramic combiset. These could scratch Import
ページ9に含まれる内容の要旨
Description of the unit CS 1212 a Burner with double booster (BI/II) Control knobs for the burners: b Burner with single booster (BI) f rear c Display g front d Cooking zone indicators e Indicators Indicators l On/Off indicator m Booster indicator n "Residual Heat" indicator 9
ページ10に含まれる内容の要旨
Description of the unit CS 1221 a Burner with double booster Indicators b Display c Indicators d Control knob l On/Off indicator m Booster indicator n "Residual Heat" indicator 10
ページ11に含まれる内容の要旨
Description of the unit Display ß = No pan on burner or pan is unsuitable A = Auto-heat F = Fault (see "Frequently asked questions") C / 0 = Safety cut-out feature (see "Safety features") I = Booster I activated II = Booster II activated H = Overheating protection (see "Safety features") L = Child safety lock (see "Safety features") Burner data Burner CS 1212 Minimum to maximum Rating in watts 240 V** diameter in cm* normal: 1400 Front (10 cm - 16 cm) with Booster: 1800 normal: 2300 Rear (16 cm
ページ12に含まれる内容の要旨
Before using for the first time Clean the combiset Heat the appliance ^ Before using for the first time, clean When the combiset is first connected to the appliance with a damp cloth and the power supply and after a power dry with a soft cloth. failure, all indicators in the display will light up for approx. 1 second. The combiset can be used as normal once the indicators go out. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Metal components of
ページ13に含まれる内容の要旨
Induction How it works If no pan or an unsuitable pan is placed on the burner, the burner and the An induction coil is located under the combiset will switch off automatically burner. When the burner is switched after 3 minutes. 0 will flash alternately on, this coil creates a magnetic field with C in the display. which impacts directly on the base of the pan and heats it up. The burner To use the burner again as normal, first itself is heated indirectly by the heat turn the control knob to "0".
ページ14に含まれる内容の要旨
Induction Noises The appliance has a cooling fan to help extend the life of the electronics. When When using an induction burner, the the combiset is being used at high following noises can occur in the pan, levels for a long period of time, this will depending on what it is made of and come on and you will hear a whirring how it is constructed. sound. The fan may continue to run – Higher power settings may cause a after the appliance has been switched buzz. This will decrease or cease off. alto
ページ15に含まれる内容の要旨
Induction Cookware Pan size To make optimum use of the burner, Suitable pans include: choose cookware that fits between the – stainless steel pans with a magnetic inner and outer marking of the burner. If base the base diameter of the pan is smaller than the inner marking, the induction – enameled steel pans heating will not work. The burner will – cast iron pans behave as if it has no pan on it. Unsuitable pans: – stainless steel pans without a magnetic base – aluminum and copper pans – glass,
