ページ1に含まれる内容の要旨
®
KENYON
INSTRUCTION MANUAL
Mediterranean 2-Burner
Caribbean 2-Burner
Mediterranean, Caribbean & Alpine
Ceramic Glass Cook Tops
(240 Volt Models UL/C-UL APPROVED)
KENYON
P.O. Box 925
8 Heritage Park Road Part # 143048
Clinton CT 06413 USA
Phone: (860) 664 - 4906
FAX: (860) 664 - 4907 rev 3/26/2004
DC-1\ke
ページ2に含まれる内容の要旨
PLEASE READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE INSTALLATION AND USE OF APPLIANCE. *** DO NOT DISCARD THIS MANUAL ! SAVE FOR FUTURE REFERENCE.
ページ3に含まれる内容の要旨
Mediterranean Series Cook Top PRODUCT SPECIFICATIONS Two Burner B41511 - 240V AC - one 6” (165mm) burner @ 1200 watts one 8” (200mm) burner @ 1800 watts Overall dimensions: 23-1/4” x 14-1/4” x 2-5/8” 590.6mm x 362.0mm x 66.7mm Cutout dimensions: 21-3/4” x 12-3/4” with 1/4” radius 552.5mm x 323.9mm with 6.4 radius Trimline B41516 - 240V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.5mm Cutout dimensions: 20” x 10-3/4” with 1/4” radius
ページ4に含まれる内容の要旨
Caribbean Series Cook Top PRODUCT SPECIFICATIONS Two Burner B41602 - 240V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.5mm Cutout dimensions: 20” x 10-3/4” with 1/4” radius 508mm x 273mm with 6.4 radius Single Burner B41606 - 240V AC - one 6” (165mm) burner @ 1200 watts Overall dimensions: 12” x 12-1/2” x 2-5/8” 304.8mm x 317.5mm x 63.5mm Cutout dimensions: 10-3/4” x 11-1/2” with 1/4” radius 273.0mm x 292.1mm with 6.4 radius
ページ5に含まれる内容の要旨
Alpine Series Cook Top PRODUCT SPECIFICATIONS Two Burner - Large B49511 - 240V AC - one 6” (165mm) burner @ 1200 watts one 8” (200mm) burner @ 1800 watts Overall dimensions: 23-1/4” x 14-1/4” x 2-5/8” 590.6mm x 362.0mm x 66.7mm Cutout dimensions: 21-3/4” x 12-3/4” with 1/4” radius 552.5mm x 323.9mm with 6.4 radius Two Burner - Small B49516 - 240V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.5mm Cutout dimensions: 20” x 10-3/4” with 1
ページ6に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR KENYON CERAMIC GLASS COOK TOPS Important: Save this documentation for review by local inspector. ! Important: This appliance must be properly installed and grounded by a qualified technician. STEP #1 Unpacking the Cook Top Carefully unpack the cook top from its shipping container. If possible, retain the original shipping carton and protective packaging in the event the unit ever has to be returned for service. Verify and identify the package contents. The follo
ページ7に含まれる内容の要旨
For future reference, please record the serial number of your cook top here: STEP #2 Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cook top. Max Connected Required Power Minimum Kenyon Part # Model # Load Supply Input Wire Size B41511 MED2 3000 Watts 240 VAC/12.5A/60Hz #12 AWG B41516 MED2TL 2400 Wa
ページ8に含まれる内容の要旨
STEP #3 Countertop Preparation Please read this section prior to making cutout for cook top. It is important to plan ahead for installation of the cook top, keeping the following dimensions in mind (please refer to Figure A). A - 13 inches maximum depth of overhead cabinets B - 36 inches is minimum height of countertop above floor C - The minimum flat countertop surface that the cook top will rest upon must be equal to or greater than the overall cook top dimensions (refer to the following page
ページ9に含まれる内容の要旨
Allow a 2” minimum clearance between the bottom of the metal pan of the cook top and any combustible surface located below, ie: the upper edge of a drawer installed below the cook top (see Fig. B on previous page). Failure to provide proper clearances and ventilation may result in a fire hazard. Cook top dimensions and countertop cutout dimensions for each model are shown below: 12" 14 1/4" 23 1/4" 21" 2 5/8" 2 5/8" 12 1/4" 20" 21 3/4" 10 3/4" Model : MED2 & ALP2LG Models: MED2TL , CAR2, ALP2S
ページ10に含まれる内容の要旨
STEP #4 Installing the Cook Top There are two mounting brackets supplied with the glass ceramic cook top. These brackets are designed to hold the cook top firmly in place. The cook top does not have a metal frame and should be bedded to the countertop using a soft bedding compound that will prevent damage if later removal for service is necessary. We recommend a very small bead of sili- cone sealant. Attach the two mounting brackets supplied with the KENYON cook top (as shown) to the inside
ページ11に含まれる内容の要旨
STEP #5 Electrical Connection Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 2 for appropriate electrical requirements. The cook top is supplied with a 48-inch long conduit for a connection to an accessible junction box. The conduit consists of three insulated wires. There are two insulated hot lead conductors (both tinned copper) and one insulated ground co
ページ12に含まれる内容の要旨
USER’S GUIDE & CARE SAFETY Read this section BEFORE operating the cook top. The following information applies to all KENYON Electric Cook Tops. This cook top, like all appliances, has the potential to create safety problems through careless and improper use. Please observe all of the following safety precautions. • Proper Installation Be sure your appliance is properly installed and grounded by a qualified technician. • Never use your appliance for warming or heating the room. • Do
ページ13に含まれる内容の要旨
• Do not use water on grease fires. Smother fire or flame or use dry chemical or foam-type extinguisher. • Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch the heating elements on the appliance. Do not use a towel or other bulky cloth in place of a potholder. • Do not cook on broken cook top. If cook top should break, cleaning solutions and spillovers may penetrate the broken cook top and create a risk of electric shoc
ページ14に含まれる内容の要旨
OPERATION READ SAFETY INSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE The cooking surface areas of your glass ceramic cook top are identified by permanent patterns in the cook top. The appliance is easy to maintain and easy to clean. Keeping the cook top in top performance can be achieved by following the simple guidelines for use and cleaning below: Cookware Chances are that your existing cookware will work just fine with your glass ceramic cook top. Cooking on a glass ceramic cook top does n
ページ15に含まれる内容の要旨
Knobs & Indicator Lights (continued) There are a series of lights that provide indications of burner operation and hot surfaces. These lights are located adjacent to the control knobs. When the control is in the “on” position, a red light is lit indicating which burner is on. For your safety, we have incorporated a “HOT” indicator light. When lit, this light indicates that some part of the glass ceramic cook top is too warm to touch or place articles upon. Do not place articles other than coo
ページ16に含まれる内容の要旨
WARRANTY KENYON International (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. This warranty is subject to the following conditions and limitations: 1. The Company’s liability shall be limited to repair or replacement (choice of remedy at Company’s option) of goods
