ページ1に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 1
Set-Up Instructions
Set-Up Instructions
for Networking and Printing
READ the S READ the Set-U et-Up p Instr Instruc uctions tions f for the M or the Machine FIRST achine FIRST,, then r then read this ead this do documen cument t f for N or Net etw wor ork king and P ing and Pr rin inting set-up ting set-up..
Thank you for purchasing Canon imageCLASS MF5770.
To get your machine ready for network and printer functions, please follow the inst
ページ2に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 2 Installation Options: •To use the machine as a local printer via USB connection, proceed to . •To use the machine as a network printer, proceed to . To Use the Machine as a Local Printer (USB Connection) IMPORTANT • Do not connect the USB cable before installing the software. If you connect the USB cable before installing the soft- ware and the Found New Hardware Wizard screen appears, click [Cancel] and disconnect the USB cable. NOTE • Fo
ページ3に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 3 7 When the MF Drivers Setup screen appears, click [Yes] and follow the instructions on the screen. 8 When the installation is complete, click [Exit] to close the MF Drivers Setup screen. 9 On the MF Setup screen, click [Install MF Toolbox]. 10 When the MF Toolbox Setup screen appears, click [Next] and follow the instructions on the screen.
ページ4に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 4 NOTE • Before installing MF Toolbox, make sure that all other applications are closed and that any anti-virus software on your computer is disabled. 11 When the installation is complete, click [Exit] to close the MF Toolbox Setup screen. 12 Make sure the machine’s power is turned on. Connect the cable to the USB port on the back of the machine. Then connect the other end of the cable to the USB port on your computer. 13 After the installa
ページ5に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 5 To Use the Machine as a Network Printer (Network Connection) IMPORTANT • The machine needs to be restarted for the specified settings to become effective. To restart the machine, disconnect the power cord, wait for at least 10 seconds, and connect the power cord again. NOTE • For details on specifying network settings, see Chapter 2,“Specifying the Network Settings,” in the Network Guide. • For additional network protocol settings, see the
ページ6に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 6 Connecting the Machine to a Network 1 Connect a Category 5 rated (Cat 5) twisted-pair LAN cable to the 10Base-T/100Base-TX port on the back of the machine. Connect the other end of the cable to a network router or a hub. Checking Network Settings 1 Press [Menu] ➝ or to select <6.NETWORK SETTINGS> on the LCD ➝ press [Set]. 2Press or to select <2.VIEW IP ADDRESS> ➝ press [Set]. 3 Press or to select the desired setting ➝ press [Set]. 4 Pre
ページ7に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 7 6 When the MF Network Drivers - Setup Wizard screen appears, click [Next] and follow the instructions on the screen. 7 Select the target machine in the Device List ➝ click [Next]. NOTE • If the target machine is not listed in the Device List, click [Search by IP Address] and enter the IP address ➝ click [OK]. If you do not know the machine’s IP address, see “Checking Network Settings” on the previous page. 8 Select the driver(s) to install
ページ8に含まれる内容の要旨
E227ME (MF5770) US2 SI N&P.qxd 12/13/04 5:59 PM Page 8 10 Select the driver type (Printer and/or Fax) ➝ click [Next] to print/fax a test page (optional). 11 When the installation is complete, click [Exit] to close the MF Network Drivers - Setup Wizard screen. 12 Click [Exit] to close the MF Setup screen. Remove the User Software CD from the CD-ROM drive and store it in a safe place. Congratulations! You have now completed the machine setup for networking and printing. Where to go from here...
