<< Previous Next >> Installing Your WiFi capable imageCLASS Product to Your Network for the First Time imageCLASS MF4570dw Windows OS 1
ページ2に含まれる内容の要旨
<< Previous Next >> Installing Your WiFi capable imageCLASS Product to Your Network for the First imageCLASS MF4570dw Windows OS Before adding the machine to a wireless LAN 3 Connection procedure 4 Switching the connection method to wireless LAN 5 Selecting a method for setting the wireless LAN 8 Configuring using WPS 9 Configuring Manually 20 Required Information 22 Using the Wireless Setup Assistant 23 Checking the IP Address 47 Installing MF Drivers and MF Toolbox 49 2
ページ3に含まれる内容の要旨
Before adding the machine to a wireless LAN << Previous Next >> Check to make sure that the setup of the computer and wireless LAN or access point are complete. If they are not set up, you will not be able to use the machine on the wireless LAN network even if you perform the following steps. • The structure of your computer or networked device, the existence of router functions, setting methods and security settings vary depending on your environment. • For more information, see the instruc
ページ4に含まれる内容の要旨
Connection procedure << Previous Next >> Once you have finished checking, connect the machine to the wireless LAN The diagram below shows the primary steps in connecting your imageCLASS device to the wireless LAN. 4
ページ5に含まれる内容の要旨
Switching the connection Method to << Previous Next >> Wireless LAN 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select , and then press [OK]. The next screen is displayed for approximately 5 seconds. It is not necessary to turn OFF/ON the main power of the machine here. It will be done on Step 5. 5
ページ6に含まれる内容の要旨
Switching the connection Method to << Previous Next >> Wireless LAN 3. Press [ ] or [ ] to select
ページ7に含まれる内容の要旨
Switching the connection Method to << Previous Next >> Wireless LAN 5. Turn the machine OFF/ON when the following screen disappears. It is necessary to turn the machine OFF/ON to activate the settings. Turn OFF the machine and wait for at least 10 seconds before turning it back ON. 7
ページ8に含まれる内容の要旨
Selecting a method for setting the wireless << Previous Next >> LAN Two methods are provided for connecting to the wireless LAN or access point, connecting using WPS (Wi-Fi Protected Setup) function or connecting manually. Select the appropriate setting method after checking the following function on the wireless LAN or access point you are using. Configuring with WPS Features(Recommended Method) Check whether the box or body of the wireless LAN router or access points that you are using suppo
ページ9に含まれる内容の要旨
Configuring with WPS Features << Previous Next >> Is there a WPS button? Set the machine’s PIN code using “WPS PIN Code No Mode” that is entered manually from the computer to the wireless LAN router or access point. Click Here YES Connect using “WPS Push Button Mode.” Click Here 9
ページ10に含まれる内容の要旨
Configuring with WPS Features (Push Button << Previous Next >> Mode) 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select , and then press [OK]. The next screen is displayed for approximately 5 seconds. You do not need to turn the machine OFF/ON in this step. 10
ページ11に含まれる内容の要旨
Configuring with WPS Features (Push Button << Previous Next >> Mode) 3. Press [ ] or [ ] to select , and then press [OK]. 4. Press [OK]. 5. Press [ ] or [ ]to select , and press [OK] 11
ページ12に含まれる内容の要旨
Configuring with WPS Features (Push Button << Previous Next >> Mode) 6. Press [ ] to select , and press [OK]. 7. Within 2 minutes, press and hold the WPS button on the wireless LAN router or access point. *The amount of time you must hold down the WPS button will depend on the wireless LAN router or access point you are using. Please refer to the instruction manual for wireless LAN router or access point. * If appears, press [OK] to close the screen, and fo
ページ13に含まれる内容の要旨
Configuring with WPS Features (Push Button << Previous Next >> Mode) 8. Make sure the WiFi indicator blinks. When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks. The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights up. *If an error message appears, press [OK] to close the screen and follow the procedure again from Step 5 13
ページ14に含まれる内容の要旨
Configuring with WPS Features (Push Button << Previous Next >> Mode) 9. Wait until the machine sets the IP address automatically (approx. 2 min). The machine sets the IP address automatically and connects to the network. When the next screen is displayed, click [OK]. If you want to set the IP address manually, see the following. •e-Manual “Setting the IP Address (IPv4) •e-Manual “Setting the IP Address (IPv6) Automatic obtaining of the IP address (Auto IP) By default, and are e
ページ15に含まれる内容の要旨
Configuring with WPS Features (Pin Code Mode) << Previous Next >> Enter the PIN code generated by the machine to wireless LAN routers and/or access points for connection. 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select , and then press [OK]. 3. Press[ ] or [ ] to select , and then press [OK]. 15
ページ16に含まれる内容の要旨
Configuring with WPS Features (Pin Code Mode) << Previous Next >> 4. Press [OK]. 5. Press [ ] or [ ] to select , and then press [OK]. 6. Press [ ] to select , and then press [OK]. 16
ページ17に含まれる内容の要旨
Configuring with WPS Features (Pin Code Mode) << Previous Next >> 7. Within 10 Minutes, use the computer to enter the PIN code displayed on the screen into the wireless LAN router or access point. *For PIN code entry methods, see the instruction manual provided with the wireless LAN router or access point you are using. *If “Cannot find Access Point” appears, press [OK] to close the screen and follow the procedure from Step 5. 17
ページ18に含まれる内容の要旨
Configuring with WPS Features (Pin Code Mode) << Previous Next >> 8. Make sure the WiFi indicator blinks. When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks. The next screen is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights. *If an error message appears, press [OK] to close the screen and follow the procedure again from Step 5 18
ページ19に含まれる内容の要旨
Configuring with WPS Features (Pin Code Mode) << Previous Next >> 9. Wait until the machine sets the IP address automatically (approx. 2 min). The machine sets the IP address automatically and connects to the network. If you want to set the IP address manually, see the following. •e-Manual “Setting the IP Address (IPv4) •e-Manual “Setting the IP Address (IPv6) Automatic obtaining of the IP address (Auto IP) By default, and are enabled Even if you do not set the IP address manua
ページ20に含まれる内容の要旨
Configuring Manually << Previous Next >> If your wireless LAN routers and/or access points do not support WPS, enter the wireless LAN router and/or access point information to the machine for connection. Select Access Point From the list of access points searched by the machine, select a wireless LAN router or an access point to be connected and enter a network key for connection. If you know your SSID and Network Key Click Here. Manual Entry Enter manually the access point name and/or securit
