ページ1に含まれる内容の要旨
Instructions for Installation and Use
Electric Hob
Model: ET7424-ET6004-ET6124
To the Installer
Before installation fill in the product details on the back cover this book.
The information can be found on the rating plate.
To the User
You must read the instructions prior to installing and using the appliance and
then retain them for future reference.
ページ2に含まれる内容の要旨
CONTENTS Introduction 3 Advice and recommendations 4 Installation and fastening 5 Electrical connection 6 Cooking zone description 7 The controls 8 Operation 9 The safety devices 10 Maintenance and care 11 After Sales Service 12 Hotpoint Guarantee 13 Key Contacts Back Cover Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or mov
ページ3に含まれる内容の要旨
Introduction Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet. To help make best use of your cooking equipment, please read this booklet carefully. The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation. * The guarantee is subject to the provisions that the appliance: (a) Has
ページ4に含まれる内容の要旨
Advice and recommendations • This appliance was designed for non-professional, • Certain fundamental rules must be followed when using household use. electrical appliances. The following are of particular im- • Before using the appliance, read the instructions in the portance: owner’s manual carefully since it contains all the instruc- • do not touch the appliance with wet or damp hands, tions you require to ensure safe installation, use and • never use the appliance when barefoot, maintena
ページ5に含まれる内容の要旨
560 +/- 1 750 +/- 1 690 785 Installation and fastening The following instructions are intended for a qualified fitter Fastening to guide him/her along the installation, adjustment and tech- Very important: It is vital that you ensure the glass ce- nical maintenance procedures as correctly as possible and ramic hob is built into a perfectly flat supporting surface. in full compliance with the applicable norms in force. Deformations due to improper fastening could alter the Important : unplug the
ページ6に含まれる内容の要旨
Electrical connection To install the cable, proceed as follows: • The electrical safety of this appliance can only be guar- • unscrew the wire clamp screw and the contact screws. anteed if the latter is correctly and efficiently earthed, • to make the desired electrical connection (see table), in compliance with regulations on electrical safety. Al- use the jumpers housed inside the box. Position the ways ensure that this vital safety measure has been power supply cable wires according to the
ページ7に含まれる内容の要旨
Cooking zone description Induction is the fastest cooking method available. Unlike traditional cooking zones, the induction zone does not heat up the glass surface. The pan itself is the heating element: the pan evenly transfers heat to its contents as long as it is made of ferromagnetic material. HOBS ET 6004 ET 6124 ET 7424 Cooking zones Power (in W) Power (in W) Power (in W) I 1800 ID 1800 – B 3000* I 2400 – B 3000* Back Right (BR) I 1200 I 1200 – 600 if BR* I 1200 – 600 if BR* Front Right (F
ページ8に含まれる内容の要旨
The controls 1. ON/OFF key 2. Cooking zone selector keys 9 3. Power (from 0 to 9) and residual heat indicators (H) 7 8 15. 4. Zone selection indicator: • on: the corresponding zone is selected and can be 3 3 0 5. modified, 4 • off: the corresponding zone is not selected, no modi- fication can be made. 2 2 5. Power increase key 6. Power decrease key 7. Timer control key for cooking time programming (only 3 3 on hobs fitted with a timer) 00 8. Programmed cooking time indicator 9. Indicator light c
ページ9に含まれる内容の要旨
Operation Controls lock When you connect the hob to the power supply, a beep When the hob is in use, you can lock the controls to avoid will sound after a few seconds: you can now turn the hob any accidental changes to the settings (by children or when on. cleaning, for example). Just press the key, the indicator light next to the key Turning on the hob lights up and the controls are locked. Press key to turn the hob on. To change the power level setting or stop cooking, the controls have to b
ページ10に含まれる内容の要旨
The safety devices Pan recognition Acoustic signal Each induction cooking zone is fitted with a pan recogni- Anomalies such as: tion device. The cooking zone only provides heat in the • an object (such as a saucepan or a lid, etc.) placed presence of a pan which is suitable for the cooking zone. for more than 10 seconds on the control zone, • boiled-over liquids or food spilled on the control zone, A blinking pan recognition indicator could signal: • prolonged pressure on a key,... • that th
ページ11に含まれる内容の要旨
Maintenance and care Advice on using your appliance Hob care To get the best from your hob, it is vital that you follow a The vitroceramic glass used for the heating surface is few fundamental rules during cooking and when preparing smooth and poreless and it is also resistant to thermal food. shocks and to mechanical shocks under normal condi- • Use pans with a flat bottom so they adhere fully to the tions of use. In order to preserve these properties, we rec- heating zone. ommend you care for
ページ12に含まれる内容の要旨
After Sales Service "No company is better positioned to offer an after sales service on a Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12 months parts and labour guarantee expires we offer the followin
ページ13に含まれる内容の要旨
Guarantee "Satisfaction guaranteed or your money back" We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if you prefer, give you your money ba
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
15
ページ16に含まれる内容の要旨
Key Contacts After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.uk Republic of Ireland: 1850 302 200 Note: Our operators will require the following information: Model number: Serial number: Extended Warranties UK: 08709 088 088 (Open 8 to 8
