ページ1に含まれる内容の要旨
Instructions for Installation and Use
BE72
Ceramic Hob
Note: Ensure that the hob unit is securely fixed to the worktop
before use.
To the User
You must read the instructions prior to using the appliance and then
retain them for future reference.
ページ2に含まれる内容の要旨
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Using Your Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14 Something Wrong ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15 Care and Cleaning . . . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
Introduction Your new appliance is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet. To help make best use of your cooking equipment, please read this booklet carefully. The appliance is designed specifically for domestic use and responsibility will not be accepted for use in any other installation. * The guarantee is subject to the provisions that the applian
ページ4に含まれる内容の要旨
Safety Information When used properly your appliance is completely safe but as with any electrical product there are certain precautions that must be observed. PLEASE READ THE PRECAUTIONS BELOW BEFORE USING YOUR APPLIANCE. Always Remove all packing from the appliance before switching on for the first time. Take time to understand the controls prior to using the appliance. Always turn controls off when not in use. Always place pans centrally over the hotplate making sure handles are kept
ページ5に含まれる内容の要旨
Safety Information Never Never leave children unsupervised where a cooking appliance is installed as all surfaces will be hot during and even after its use. Never allow anyone to sit or stand on any part of the appliance. Never store items above the appliance that children may attempt to reach. Never leave anything on the hob surface when unattended and not in use. Never heat up unopened food containers as pressure can build up causing the container to burst. Never allow sharp edged
ページ6に含まれる内容の要旨
Using Your Hob Choice Of Utensils Every Electric Hob deserves the right choice of utensils. We recommend for optimum performance the use of good quality utensils. PANS SHOULD NOT: Always Never ✗ Use good quality flat-based Use gauze, metal pan diffusers, cookware on all electric heat asbestos mats and stands e.g. sources. Wok stands – they can cause overheating. Ensure pans have clean, dry bases before use. Use utensils with skirts or rims Be concave (bowed in) e.g. buckets and some ke
ページ7に含まれる内容の要旨
Using Your Hob THE BEST COMBINATIONS This table is a general guide to the types of pan suitable for different types of hobs and cookers. Remember pans should be good quality, with smooth, flat bases. For any further information refer to manufacturers’ instructions. Saucepan Types Suitability Aluminium Stainless steel with single layer copper base Stainless steel with sandwich bases of aluminium and stainless or aluminium and copper. Enamelled steel Enamelled Aluminium Enamelled based c
ページ8に含まれる内容の要旨
Using Your Hob NEVER allow aluminium foil to be in contact with the hob surface when in use. Cooking Zone description The Halogen Solarglo Cooking Zones ensure the immediate visibility of their operation and provide instant heat. We recommend you use these zones to cook dishes requiring fierce heat and for rapid heating up of small quantities of food. The Radiant Cooking Zones take longer to turn red. We recommend their use for simmering and slow cooking. DO NOT allow young children near to t
ページ9に含まれる内容の要旨
Using Your Hob Features Mixed Halogen Solarglo and Ceramic dual cooking zone (850 / 2400W) oval Ceramic cooking zone (800 / 1000W) Halogen Solarglo Ceramic Cooking cooking zone zone (1200W) (1300W) On/Off sensor Lock control 4 Cooking zone controls with power increase/decrease sensors and timer control Cooking zone controls Total power capacity: 6700W 230V 9
ページ10に含まれる内容の要旨
Using Your Hob Use The appliance is controlled by simply touching the different keys marked on the ceramic surface. Operation Connect the cooking hob to the mains electricity supply by touching inside the area marked . The ‘Power On’ indicator light, to the right of the key, will light up. To enable the control panel, press and hold for 3 seconds. The Lock indicator light, to the left of the key, will light up. The cooking zones can now be used. NOTE: If no keys are pressed for 2 mi
ページ11に含まれる内容の要旨
Using Your Hob Choosing the power Touch the symbol corresponding to the chosen control setting zone, and the display will increase .... levels. Stop when the desired level is reached. NOTE: By pressing the key briefly, you can go directly to level and then back down to level if you so wish. To turn down the heat, press the key. To turn off the cooking zones press the lower and top parts of the key simultaneously, the power will reduce to zero and the temperature indicator will t
ページ12に含まれる内容の要旨
Using Your Hob Blinking temperature indicators The temperature indicators will blink if: - An object (eg. saucepan/lid) is placed on the cooking zone for more than 10 seconds. - Any boiled over liquids or food are spilled onto the control zone. - Any extended pressure is placed on the control zone. These could cause the word ‘DEF’ to appear on the display, accompanied by a beep. The temperature indicators will blink and the cooking zone(s) in use will turn off. To stop the beep, remove the caus
ページ13に含まれる内容の要旨
Using Your Hob Overheating Prolonged use of the hob could cause the electronic components to overheat. A thermal protection device momentarily sets a reduced power (level 3) on the right hand cooking zones. The temperature indicators blink to show you that this safety measure has been taken. When the temperature returns to normal, the temperature indicators stop blinking and the cooking zones can once again be used at higher power levels if required. Should the temperature of the electronic comp
ページ14に含まれる内容の要旨
Using Your Hob In the unlikely event of a crack (no matter what size) appearing in the ceramic surface switch off the electricity supply to the appliance IMMEDIATELY and contact your Service Centre. DO NOT USE THE APPLIANCE UNTIL IT IS REPAIRED! Do not leave a hotplate turned on when you are not cooking as this makes it harder to clean the ceramic surface. Temperature cut-outs are built into the hob elements to protect them from over heating. After several minutes with the control setting on F
ページ15に含まれる内容の要旨
Operating Faults (Cooking plate sensors) I switch the hob on and it ❏ You are taking more than 10 seconds to choose the switches off cooking zone you wish to use. Make your choice more quickly. ❏ You have touched a selection symbol for too long (*) Hob emits a long bleep ❏ There is a receptacle or damp cloth on the control area. Remove it. ❏ Some liquid has spilled onto the control area, or it is damp. Dry it ❏ You are cleaning the hob and the control area is damp (*). ❏ Someone is leaning on th
ページ16に含まれる内容の要旨
Care And Cleaning SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CLEANING. UPON SWITCHING ON AGAIN, ENSURE THAT ALL CONTROLS ARE IN THE OFF POSITION. NEVER USE BIOLOGICAL WASHING POWDER, HARSH ABRASIVE, SCOURING PADS, AEROSOL CLEANERS OR OVEN CHEMICAL CLEANERS OF ANY KIND. Cleaning Materials To Avoid 1. Household abrasive powders. 2. Oven chemical cleaners, aerosols and oven pads Caustic cleaners such as these will etch the surface and attack the metal frame. 3. Bath and sink cleaners may mark the su
ページ17に含まれる内容の要旨
Installation WARNING - THIS APPLIANCE MUST BE EARTHED All Hotpoint hobs are suitable for installation over any Hotpoint Build-in or Build-Under Ovens. Your hob should have been checked to ensure that the voltage corresponds with your voltage supply. This is stated on the rating plate, which is situated on the under side of the base panel. The appliance must be connected by a contractor/engineer such as one who is registered with the National Inspection Council for Electrical Installation Contrac
ページ18に含まれる内容の要旨
560mm Installation FITTING THE HOB Unpack the hob from the carton. Lower the hob into the worktop ensuring the mains lead is fed into the base unit and is not trapped under the flanges. Fix the hob to the worktop. Connect the hob to the electrical supply (see INSTALLATION). Ensure that the hob is functioning correctly prior to use. Instruct the user in the operation of the hob. Fig. 1 IMPORTANT Minimum unobstructed depth 55mm Front edge of worktop Worktop thickness Preferred 30-40mm 19mm minimum
ページ19に含まれる内容の要旨
Installation TECHNICAL INFORMATION FOR THE INSTALLER Read this chapter carefully, as it contains vital information for a safe and secure installation. Recommendations The appliance must be installed by a qualified technician in compliance with the instructions provided by the manufacturer. The latter denies all responsibility for improper installation which may harm persons and animals and damage property. When you have removed all packing, check whether the appliance is intact. Never leave the
ページ20に含まれる内容の要旨
Installation TECHNICAL INFORMATION FOR THE INSTALLER Very Important: It is vital that you ensure the glass ceramic hob is built into a perfectly flat supporting surface. Deformations due to improper fastening could alter the characteristics of the hob and compromise its performance. Take particular care in ensuring the seal surrounding the hob is correclty in place, in order to avoid any leaks into the supporting cabinet. Fig. 4 Fixing Brackets HOB FROM BELOW Fixing Brackets HOB TOP WORKTOP Cut
