ページ1に含まれる内容の要旨
Users Guide & Installation
Handbook
Belling CTC60 Hob
08 27451 01 @ 11.20010
ページ2に含まれる内容の要旨
2 19
ページ3に含まれる内容の要旨
Service Contents Introduction 3 Calling for Service Please consult your retailer in the first instance. If you experience difficulty Installing Your Hob….. 4-6 contact Belling Appliances, After Sales Division. Remember that you may be charged for the visit (even during the For your own safety – Never / Always 7 guarantee period) if nothing is found to be wrong with the appliance, so always check the instructions to make sure that you have
ページ4に含まれる内容の要旨
Care of Your Hob Introduction Your Belling Thank you for purchasing a new Belling electric built-in hob. Its stylish Hob and practical design will enhance your kitchen and make cooking a In the interests of both safety and hygiene your Belling hob needs pleasure. Even if you have used an electric hob before, it is important that to be kept clean. A build-up of grease or fat from cooking may you read these instructions thoroughly before starting to cook, paying cause a fir
ページ5に含まれる内容の要旨
Installing your hob Boost Function Before cutting the work top, make sure that there is enough space underneath to accept the hob, and that there are no supports or projections which might interfere with fitting the hob. The hob features a boost facility which enables pans to be brought up to temperature quickly with maximum power, before dropping to a lower energy setting automatically. It is Cut the aperture in the work top to the dimensions shown in the relevant activ
ページ6に含まれる内容の要旨
Installing your hob Safety Features Connecting the hob The connection to the electrical supply must be made before fitting Safety Lock It is possible to lock the element controls and timer against the hob in the work top. accidental operation. At any time during the hobs use, if the pad marked is touched for 2 seconds the controls will be locked For your own safety, we recommend that your hob is connected by i.e. they cannot be adjusted. The lock function is
ページ7に含まれる内容の要旨
Timer Operation Installing your hob Your hob has a timer built in which can either be used to automatically switch off Belling built-under The hob can be fitted above a Belling built-under single or double a cooking zone after a pre set period of time, or as an alarm reminder. The timer single oven unit or oven unit if required. features a maximum duration of 99 minutes. double oven unit For your own safety, we recommend that your hob and oven are connected by a compe
ページ8に含まれる内容の要旨
For your safety Using A Ceramic Hob Controls When used properly your Belling built-in hob is completely safe, but as with any electrical appliance there are some precautions you must take in its use. Increase heat setting Never.. Element selector l Never allow anyone except an authorised Belling Service Agent to service or repair Lock your hob. l Never remove any part of the hob other than those intended in normal use, or attempt to modify the appliance in any way.
ページ9に含まれる内容の要旨
Using A Ceramic Hob Using A Ceramic Hob WARNING: Extreme caution should be taken to avoid steam burns and hot surfaces Before using the hob for the first time, clean the hob surface with a when cleaning up spillage on the hot hob surface. Ceramic Hob Cleaner and Conditioner. This applies a thin protective film to the hob, making it easier to clean and prolong its 1. Always clean up any spillage immediately with a clean cloth or a paper towel to life avoid unnecessary damage to
ページ10に含まれる内容の要旨
Using A Ceramic Hob – General Information Using A Ceramic Hob - Safety WARNING! If any crack should appear on the hob, isolate the hob immediately from the mains supply. Do not use any part of the NEVER Never cook directly on the hob surface without a cooking utensil as hob but contact your Belling Service Agent. this will result in damage to the surface of the hob. The ceramic hob elements are fitted with special controls to Never use the hob as a worktop surface as
