ページ1に含まれる内容の要旨
Induction cooktop
Installation instructions
CI604DT, CI754DT,
and User guide
and CI905DT models
NZ AU GB IE
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 Contents Safety and warnings 2 Installation instructions 6 Introduction 16 Choosing the right cookware 18 Using your induction cooktop 19 Using your cooktop’s special features 22 Cooking guidelines 32 Care and cleaning 34 Troubleshooting 35 Warranty and service 37 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and spe
ページ4に含まれる内容の要旨
2 Safety and warnings Your safety is important to us. Please read this information before using your cooktop. Installation WARNING! Electrical Shock Hazard Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician. Failure to follow this advice may result in electrical shock or death.
ページ5に含まれる内容の要旨
3 Safety and warnings Important safety instructions Read these instructions carefully before installing or using this appliance. No combustible material or products should be placed on this appliance at any time. Please make this information available to the person responsible for installing the appliance as it could reduce your installation costs. In order to avoid a hazard, this appliance must be installed according to these instructions for installation. This appliance is to be prop
ページ6に含まれる内容の要旨
4 Safety and warnings Operation and maintenance WARNING! Electrical Shock Hazard Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. Switch the cooktop off at the wall before cleaning or maintenance. Failure to follow this advice may result in electrical shock or death. WARNING! Health Hazard This appliance complies with electromagnetic
ページ7に含まれる内容の要旨
5 Safety and warnings WARNING! Cut Hazard The razor-sharp blade of a cooktop scraper is exposed when the safety cover is retracted. Use with extreme care and always store safely and out of reach of children. Failure to use caution could result in injury or cuts. Important safety instructions Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Never use your appliance as a work or storage surface. Never leave any objects or ute
ページ8に含まれる内容の要旨
CI905DT CI754DT CI604DT 6 Installation instructions Electrical connection is Cooktop and cutout dimensions made at the right rear A B C E D G F Cooktop and cutout dimensions (mm) 600 750 900 A overall width of cooktop 530 530 530 B overall depth of cooktop height of chassis (plastic housing incl. terminal block) 55 55 55 C below top of bench D width of chassis (metal frame) 546 716 852 476 476 482 E depth of chassis (metal frame) 560 725 870 F overall width of cutout overall depth of cutout
ページ9に含まれる内容の要旨
CI905DT CI754DT CI604DT 7 Installation instructions Clearances A WARNING! D This cooktop requires B adequate supply of cool air to fully function. The base of the cooktop C must have direct unrestricted ventilation to the room where the C cooktop is installed. Follow E the requirements below. 2x 50mm holes to allow adequate cool air EE 4 mm 4 mm Top of drawer or 2x 50mm holes other obstruction 2x 50mm holes to allow adequate to allow adequate cool air cool air Oven with cooling fa
ページ10に含まれる内容の要旨
8 Installation instructions Before you install the cooktop, make sure that the benchtop is square and level, and no structural members interfere with space requirements the benchtop is made of a heat-resistant material the cooktop will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as the humidity may damage the cooktop electronics if the cooktop is installed above an oven, the oven has a built-in cooling fan the installation will comply w
ページ11に含まれる内容の要旨
9 Installation instructions Connecting the cooktop to the mains power supply Important! This cooktop must be connected to the mains power supply only by a suitably qualified person. Before connecting the cooktop to the mains power supply, check that: 1 the domestic wiring system is suitable for the power drawn by the cooktop. 2 the voltage corresponds to the value given in the rating plate 3 the power supply cable sections can withstand the load specified on the rating plate. To connec
ページ12に含まれる内容の要旨
10 Installation instructions Applying the supplied foam seal 1 Turn the cooktop upside down and place it carefully on a soft surface. Important! To avoid damage to the glass, ensure there is a protective cover underneath it. 2 Apply the foam seal around the glass overhang, 5 mm in from the edge of the glass. 3 Turn the cooktop the right way up and place it into the cutout. Clamping down the cooktop Depending on the thickness of the benchtop, secure the supplied clamping brackets as shown.
ページ13に含まれる内容の要旨
CI905DT CI754DT CI604DT 11 Installation instructions Electrical connection is Flush mounting installation made at the right rear (not recommended) A B C WARNING! We do not recommend flush E mounting and sealing as servicing D requires the cooktop to be removed from the benchtop. The owner carries all risk for flush mounting the cooktop. The owner J must ensure the cooktop has been G cut out from the benchtop before servicing can be carried out. Fisher & Paykel will not be lia
ページ14に含まれる内容の要旨
12 Installation instructions Flush mounting installation (not recommended) Important! For any clearance or other installation requirement not specified separately for flush mounting installation, details in the previous section (recommended method of installation) apply. A B 53-70 mm Important! Do not overtighten the screws! 35-53 mm 5 mm Important! Do not overtighten the screws! C
ページ15に含まれる内容の要旨
13 Installation instructions Flush mounting installation (not recommended) Important! For any clearance or other installation requirement not specified separately for flush mounting installation, details in the previous section (recommended method of installation) apply. DE Ensure silicone does not leak underneath glass. O min. 150 C rated Apply tape/foam inside recess to stop silicone leaking underneath. F TO REMOVE PRODUCT 2 1
ページ16に含まれる内容の要旨
14 Installation instructions Final checklist TO BE COMPLETED BY THE INSTALLER Is the cooktop earthed? Check that there is an adequate and constant flow of cool air from the cabinetry to the base of the cooktop. Check that the power supply cable is not accessible via cupboard doors or drawers. Is the cooktop clamped down securely? Check that the pan detection feature is working correctly. Turn on each cooking zone without putting any cookware on them. Are all the displays flashing ? Che
ページ17に含まれる内容の要旨
15
ページ18に含まれる内容の要旨
16 Introduction Introducing your cooktop Congratulations on your new purchase. Your Fisher & Paykel induction cooktop is the ultimate in induction cooking, giving you the speed, precision, and simplicity of electronic control, and the easy-care elegance of a ceramic glass surface. For more information, visit our local website listed on the back cover. A word on induction cooking Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic v
ページ19に含まれる内容の要旨
17 Introduction 1223 3 2 1 1 Fig.4 CI604DT model Fig.5 CI754DT model 66 1 1400 W (1800W*) zone 2 1850 W (2500W*) zone 12 3 2300 W (3700W*) zone 5 4 2300 W (3200W*) zone 5 2400 W (3700W*) zone 6 Touch controls 4 2 * Maximum power output when set for PowerBoost See ‘Using your cooktop’s special features.’ Fig.6 CI905DT model 6 10 7 8 9 11 12 Fig.7 Touch controls for CI604DT and CI754DT models 10 8 11 12 7 9 Fig.8 Touch controls for CI905DT model 7 GentleHeat control 10 Heat setting controls
ページ20に含まれる内容の要旨
18 Choosing the right cookware Important! Only use cookware with a base suitable for induction cooking. Look for the induction symbol on the packaging or the bottom of the pan. You can check whether your cookware is suitable by carrying out a magnet test. Move a magnet towards the base of the pan. If it is attracted, the pan is suitable for induction. If you do not have a magnet: 1 Put some water in the pan you want to check. 2 Follow the steps under ‘To start cooking’ opposite. 3
