ページ1に含まれる内容の要旨
Ceramic cooktop
Installation instructions
CE244C & CE365D models
and User guide
Plaque de cuisson céramique
Instructions d’installation et
Modèles CE244C et CE365D
Guide d’utilisation
US CA
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 Contents US CA Safety and warnings 2 Installation instructions 8 Introduction 16 Using your cooktop 17 Cooking guidelines 18 Care and cleaning 20 Troubleshooting 22 Warranty and service 23 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed
ページ4に含まれる内容の要旨
2 US Safety and warnings CA Your safety is important to us. Please read this information before using your cooktop. IMPORTANT SAFETY INSTRUCTIONS Installation WARNING! Electrical Shock Hazard Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician. Failure to follow this advice m
ページ5に含まれる内容の要旨
3 Safety and warnings US CA IMPORTANT SAFETY INSTRUCTIONS Failure to install the appliance correctly could invalidate any warranty or liability claims. For personal safety, this appliance must be properly grounded. Do not leave packaging elements (e.g. plastic bags, polystyrene foam, staples, packing straps) within easy reach of children during or after installation, as these may cause serious injury. Make sure you recycle the packaging material. Before disposing of any appliance, make
ページ6に含まれる内容の要旨
4 US Safety and warnings CA IMPORTANT SAFETY INSTRUCTIONS Operation and maintenance WARNING! Electrical Shock Hazard Do not cook on a broken or cracked cooktop. If the cooktop should break or crack, cleaning solutions and spillovers may penetrate it and create a risk of electrical shock. Contact a qualified technician immediately. Failure to follow this advice may result in death or electrical shock. WARNING! Cut Hazard The razor-sharp blade of a cooktop scraper is exposed when the
ページ7に含まれる内容の要旨
5 Safety and warnings US CA IMPORTANT SAFETY INSTRUCTIONS Operation and maintenance WARNING! Fire Hazard Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Failure to follow this advice may result in overheating, burning, and injury. WARNING! Hot Surface Hazard DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to ca
ページ8に含まれる内容の要旨
6 US Safety and warnings CA IMPORTANT SAFETY INSTRUCTIONS Operation and maintenance Proper installation — Be sure your appliance is properly installed and grounded by a qualified technician. Never use your appliance for warming or heating the room. Do not leave children alone — Children should not be left alone or unattended in the area where the appliance is in use. They should never be allowed to sit or stand on any part of the appliance. Wear proper apparel — Loose-fitting or hangin
ページ9に含まれる内容の要旨
7 Safety and warnings US CA IMPORTANT SAFETY INSTRUCTIONS Operation and maintenance CAUTION - Do not store items of interest to children in cabinets above an appliance - children climbing on the appliance to reach items could be seriously injured. Never use your appliance as a work or storage surface. Never leave any objects or utensils on the appliance. Do not place or leave aluminum foil on the cooktop. Children or persons with a disability which limits their ability to use the ap
ページ10に含まれる内容の要旨
CE365D CE244C 8 US Installation instructions CA Cooktop and cutout dimensions Electrical connection is near the middle front of the chassis A B C E D H G F Cooktop and cutout dimensions (inches (mm)) A overall width of cooktop 23 5⁄8” (600) 35 7⁄16” (900) 20 7⁄8” (530) 20 7⁄8” (530) B overall depth of cooktop 4 ¼ ” (108) 4 ¼ ” (108) C height of chassis below top of counter (including height of conduit junction) width of chassis 21 5⁄8” (550) 34 1⁄8” (866) D E depth of chassis (including sp
ページ11に含まれる内容の要旨
CE365D CE244C 9 Installation instructions US CA Clearance and cabinetry dimensions F G A E B D C C H J I Clearance and cabinetry dimensions (inches (mm)) minimum clearance from rear edge of cutout to: A nearest combustible surface 2 3⁄16” (55) 2 3⁄16” (55) minimum clearance from glass surface to: overhead cabinet centered above the cooktop (unprotected)* 30 ” (762) 30 ” (762) B overhead cabinet centered above the cooktop (protected)* 24 ” (610) 24 ” (610) minimum clearance from side edges
ページ12に含まれる内容の要旨
10 US Installation instructions CA Clearance and cabinetry dimensions cont. Notes: #1 To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a rangehood that projects horizontally a minimum of 5 “ (127 mm) beyond the bottom of the cabinets. #2 B=30” (762 mm) minimum clearance between the top of the cooking surface and th
ページ13に含まれる内容の要旨
11 Installation instructions US CA Before you install the cooktop, make sure that the countertop is square and level, and no structural members interfere with space requirements the countertop is made of a heat-resistant material the cooktop will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as the humidity may damage the cooktop electronics if an oven is installed below the cooktop, it must be one of the models indicated in Fig.1 the in
ページ14に含まれる内容の要旨
12 US Installation instructions CA Additional electrical requirements Electrical installation must be carried out only by a licensed electrician. The cooktop MUST be connected to the proper electrical voltage and frequency as specified: Model Rated power Required power supply CE244C 5.9kW (4.4kW) 240V~,25A, 60Hz (208V~, 21.3A, 60Hz) CE365D 8.4kW (6.5kW) 240V~,35A, 60Hz (208V~, 30.3A, 60Hz) This appliance must be connected to a grounded, me
ページ15に含まれる内容の要旨
13 Installation instructions US CA Connecting the cooktop to the power supply The nameplate label is located on the underside of the cooktop, on the right hand side. See Fig. 5 below. If the appliance is to be completely enclosed in a cabinet, feed the appliance cable through the opening in the cabinet. 1 Disconnect the power supply. 2 Remove the junction box cover. 3 Connect the cooktop cable to the junction box through the CSA or UL-listed conduit connector. 4 Connect the two black wi
ページ16に含まれる内容の要旨
14 US Installation instructions CA Fastening the cooktop to the counter 1 Turn the cooktop upside down and place it on a soft surface. 2 Spread the seal around the edges of the cooktop with the adhesive side facing down, as shown in Figs. 6 and 7. Make sure that the whole perimeter is sealed. Cut off any excess material. 3 Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening the screws). 4 Place the cooktop into the cutout, then tighten the screws to cla
ページ17に含まれる内容の要旨
15 Installation instructions US CA Final checklist TO BE COMPLETED BY THE INSTALLER Is the cooktop grounded? Check that the connection through conduit is not accessible via cupboard doors or drawers. Is the cooktop clamped down securely? Make sure the cooktop is clean and free from any debris. Wipe with a clean damp cloth if necessary. Check that all the cooking zones function correctly. Turn on all of them to a high setting and leave them on for at least one minute. Are all elements gl
ページ18に含まれる内容の要旨
16 US Introduction CA About your new cooktop Thank you for buying a Fisher & Paykel ceramic glass cooktop. This guide introduces you to all its special features. We recommend you read the whole guide before using your new cooktop, for both safety and cooking success. For more information, visit our local website listed on the back cover. Before using your new cooktop Read this user guide, taking special note of the ‘Safety and warnings’ section. Remove any protective film that may still be
ページ19に含まれる内容の要旨
17 Using your cooktop US CA To start cooking Turn the control dial of the cooking zone you wish to use to the HI setting, then adjust as necessary. When using dual cooking zones, you may choose to use the inner zone only ( ) or the full dual cooking zone ( ). See Fig. 10 below. The front right cooking zone has a unique SuperSimmer feature (see Fig. 11). This special, low turndown range is excellent for Fig.9 Single cooking zone control the most delicate cooking tasks, like melting
ページ20に含まれる内容の要旨
18 US Cooking guidelines CA Cookware Use heavy-gauge, flat, smooth-based cookware that matches the diameter of the cooking zone. This will provide good contact with the glass and help reduce cooking times. Low heat or slow cooking is often due to incorrect cookware size. Cookware with a stainless steel sandwich base or enamelled cast iron will give you the best results. Saucepans or heavy skillets with jagged edges or a rough base will scratch the glass. Always lift pans off the cookt
