ページ1に含まれる内容の要旨
instruction booklet
GB IE
gas hobs
EHT 60410
ページ2に含まれる内容の要旨
2 electrolux
ページ3に含まれる内容の要旨
electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior
ページ4に含まれる内容の要旨
4 electrolux Contents Important Safety Information.......................................................... 5 Description of the Hob ..........................................................................7 Instructions for the User...................................................................7 Operation ..............................................................................................8 Maintenance and Cleaning .................................................................
ページ5に含まれる内容の要旨
electrolux 5 Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08445 613 613. Installation This appliance must be installed and serviced by a competent person as stated in the Gas Safety (Installation and Use) Regulations Current Editions and the IEE Wiring Regulations. For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installations I.S.813
ページ6に含まれる内容の要旨
6 electrolux improved, by opening a window or increasing the extractor speed. Do not use this hob if it is in contact with water. Do not operate the hob with wet hands. Appliances become very hot with use, and retain their heat for long periods after use. Care should be taken to avoid touching heating elements inside the hob. Ensure the control knobs are in the ‘OFF’ position when not in use. When using other electrical appliances, ensure the cable does not come into contact with the hot sur
ページ7に含まれる内容の要旨
electrolux 7 Description of the Hob 3 2 3 4 1 5 1. 1. 1 1. 1. . Hob top 2. 2 2. . Rapid Burner 2. 2. 3. 3. 3 3. 3.. Semi Rapid Burner 4. 4. 4. 4 4. . Auxiliary Burners 5. 5 5. . Control knobs 5. 5. Instructions for the User INSTALLATION Any gas installation must be carried out by a registered competent person, and in accordance with existing rules and regulations. The relevant instructions are to be found in the second section of this manual. Please, ensure that, once the hob is installed, it
ページ8に含まれる内容の要旨
8 electrolux Operation Hob burners control knobs The symbols on the knobs mean that : there is no gas supply there is maximum gas supply there is minimum gas supply Lighting the burners For easier lighting, proceed before putting a pan on the pan support. To light a burner: A A A A A - Burner cap Turn the relevant knob anticlockwise to B B B - Burner crown B B maximum position ( ) and push down C C C C C - Ignition electrode the knob to ignite. D D D D D - Thermocouple After lighting t
ページ9に含まれる内容の要旨
electrolux 9 If the burner accidentally goes out, turn the control knob to the “off” position and wait for at least one minute before trying to light the burner again. If the control knobs become difficult to turn, please contact your local Service Force Centre. Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a flat bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the
ページ10に含まれる内容の要旨
10 electrolux Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob Top Clean the hob while it is still warm. Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring powders, o
ページ11に含まれる内容の要旨
electrolux 11 Pan Supports The pan supports can be removed to easily clean the hob (Fig.). Wash the pan supports using hot soapy water; after cleaning, be sure to wipe dry with a soft cloth. The pan supports are not dishwasher proof; they must be washed by hand. Washing them by hand, take care when drying them as the enamelling process occasionally leaves rough edges. If necessay, remove stubborn stains using a paste cleaner. After cleaning, make sure that the pan supports are correctly positi
ページ12に含まれる内容の要旨
12 electrolux Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre. SYMPTOM SYMPTOM SYMPTOM SYMPTOM SYMPTOM SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION There is no spark when Check that the unit is plugged lighting the gas. in and the electrical supply is switched on. Check that the RCCB has not tripped (if fitted). Check the mains fuse has not blown. Check the burner cap and crown h
ページ13に含まれる内容の要旨
electrolux 13 Instructions for the Installer Engineer technical data Engineer technical data Engineer technical data Engineer technical data Engineer technical data OVERALL DIMENSIONS OVERALL DIMENSIONS OVERALL DIMENSIONS OVERALL DIMENSIONS OVERALL DIMENSIONS Width: 590 mm Depth: 520 mm CUT OUT DIMENSIONS CUT OUT DIMENSIONS CUT OUT DIMENSIONS CUT OUT DIMENSIONS CUT OUT DIMENSIONS Width: 560 mm Depth: 480 mm SUPPL SUPPL SUPPL SUPPL SUPPLY CONNECTIONS Y CONNECTIONS Y CONNECTIONS Y CONNECTIONS Y C
ページ14に含まれる内容の要旨
14 electrolux Characteristics of gas burners Characteristics of gas burners Characteristics of gas burners Characteristics of gas burners Characteristics of gas burners TYPE BURNERS INJECTORS NORMAL REDUCED NORMAL FEEDING OF POWER POWER POWER PRESSURE 3 GAS 1/100 mm kW kW m /h g/h mbar g/h G30 G31 Rapid 119 2,9 0,75 0,276 - - NATURAL GAS Semi-rapid 96 1,9 0,45 0,181 - - 20 Auxiliary 70 1,0 0,33 0,09 - - Rapid 86 2,7 0,75 - 196 192
ページ15に含まれる内容の要旨
electrolux 15 Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S. 813 Current Editions and the ETCI Rules for Electrical Installations. Pr Pr Pr Pr Provision for V ovision for V ovision for V ovision for V ovision for Ventilation entilation entilation
ページ16に含まれる内容の要旨
16 electrolux Installation IMPORTANT Any gas installation must be carried out by a GAS SAFE REGISTER installer. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this instruction booklet be ignored. On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that the wash
ページ17に含まれる内容の要旨
electrolux 17 Gas Connection Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper. The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installation. Ensure that the main connection pipe does not exert any strain on the hob. It is important to install the elbow correctly, with the shoulder on the end of
ページ18に含まれる内容の要旨
18 electrolux Fitting the Hob into the Worktop Before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. 1) Remove the pan supports, the burners A caps and crowns and turn the hob upside down, taking care the ignition candles are not damaged in this B operation. C C C C C 2) Place the sealing gasket (C) all around th
ページ19に含まれる内容の要旨
electrolux 19 Building In B B Building over a cupboard or drawer uilding over a cupboard or drawer uilding over a cupboard or drawer B Building over a cupboard or drawer uilding over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface. It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2. B B Building over a
ページ20に含まれる内容の要旨
20 electrolux Electrical Connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. This hob is designed to be connected to a 230 V 50 Hz AC electrical supply. Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating p
