ページ1に含まれる内容の要旨
INSTRUCTION BOOK
FM 4803K-an
GB 325 88-8327 rev. 3-343 949 601 004
ページ2に含まれる内容の要旨
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. If you require further assistance or ad
ページ3に含まれる内容の要旨
Contents Page no. For the User Your New Appliance........................................................................................ 2 Safety Information .......................................................................................... 5 Product Description ........................................................................................ 7 Ceramic Hob .......................................................................................... 8 Induction.......................
ページ4に含まれる内容の要旨
Contents Page no. For the Installer Unpacking ........................................................................................................ 26 Technical Specifications .................................................................................. 27 Installation........................................................................................................ 28 Mounting ..........................................................................................................
ページ5に含まれる内容の要旨
Safety Information hob while the zones are turned on. Exclusions The hob is intended for domestic use Never place metal objects (spoons, This guarantee does not cover: only. If it is used in any other way pan lids etc.) on an induction zone. · Damage or calls resulting from transportation, improper use or neglect, the there is a risk of accidents. replacement of any light bulbs or removable parts of glass or plastic. · Costs incurred for calls to put right an appliance which is improperly instal
ページ6に含まれる内容の要旨
Customer Care Disposal For general enquires concerning your AEG appliance or for further information Help prevent accidents when dispos- on AEG products, please contact our Customer Care Department at the address ing of the product. Remove the cable below or visit our website at www.aeg.co.uk from the wall plug and cut off the cable close to the product. Customer Care Department AEG Domestic Appliances 55-77 High Street Slough, Berkshire SL1 1DZ Tel 08705 350350* *calls to this number may be rec
ページ7に含まれる内容の要旨
Product Description 1. Cooking zone Ø 140 mm, 1400 W. Service and Spare Parts 2. Cooking zone Ø 210 mm, 2200 W, In the event of your appliance requiring service, or if you wish to purchase spare 3000 W power. parts, contact your local AEG Service Force Centre by telephoning: 1 3. Control panel 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area. 2 For the address of your local Service Force Centre and further information about Service Force,
ページ8に含まれる内容の要旨
Ceramic hob Problems Remedy Ceramic glass is insensitive to tem- perature shock and very robust: The zones won’t turn on. The dis- Child safety has been activated. You however it is not unbreakable. play shows: can either press the button at the j Especially sharp and hard same time as you make a selection, or objects that fall on the cooking sur- you can cancel the child safety device, face can damage it. see Section “How to use .. Child safety”. Induction The zones won’t turn on and the Autos
ページ9に含まれる内容の要旨
What to do if... If the appliance is not working correctly, please carry out the following checks High safety levels Power before contacting your local AEG Service Force Centre. The individual zones will only get The front zone has a facility for hot when a pan with a magnetic base switching in extra heat to give an IMPORTANT: If you call out an engineer to a fault caused by incorrect use or is placed on them. It is impossible to even quicker boiling time. When installation, a charge will be mad
ページ10に含まれる内容の要旨
Before Use Protect the ceramic hob Overview of the outside width of the units Before using the hob for the first time, clean off any manufacturing 180 mm residues such as dust, dirt etc. Downdraft Apply a protective coating on the ceramic hob before you use it. This 360 mm way it becomes easier to clean the Glass ceramic hob with 2 cooking glass and you prevent any spillage zones from burning. Gas hob with 2 burners Induction hob with 2 cooking zones This is what you do: Grill 1. Pour a few dro
ページ11に含まれる内容の要旨
How to use To optimise joints between the installed hobs, the gap between the ceramic hob Ceramic hob Make sure there is no sand, sugar or may be grouted with silicone: salt on the base of the pan. Sand can Never use a cracked vitroce- cause scratches and sugar and salt 1. Remove the aluminium panels from the hobs. ramic hob. can damage the hob. 2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only Water could boil over and/or Always dry pans before placing the silicon
ページ12に含まれる内容の要旨
Mounting: Touch Controls When mounting several hobs together you must use a reinforcement beam The sensor fields must be touched for mini- between each hob as well as the silicone supplied with the hobs (see fig.) mum 1 sec. before activation. 1. Cut a hole of the calculated size in the table top 2. Place the individual hobs upside down on a mat. Take care that the top side is Cooking Zones not scratched. The cooking zones can be adjusted from 0-9, where 9 3. Mount the clamping fittings in the
ページ13に含まれる内容の要旨
Turn off a single zone by pressing Mounting more than one the or buttons until the dis- hob m l play shows “0”. You can turn off a zone quickly by pressing the and l buttons simultaneously. m Distance to wall: Turn off all zones by pressing the Min. 150 mm button. (flammable material) k Distance to wall: Residual Heat Indicator Min. 50 mm (non-flammable material) Each cooking zone has a residual heat indicator. When the cooking Reinforcement beam zone is turned off the “H” is lit up in the displ
ページ14に含まれる内容の要旨
Power Cutting Out Switching on power When mounting this unit: Read the You can switch the front cooking instructions on this page. When zone to extra heat for a maximum of mounting the hob together with 10 minutes . other units: Read the instructions on the next page. 1. Press the knob. k For mounting the hob you need a 2. Set the cooking zone to level “9” Philips screwdriver and the 4 clamp- Clamping fittings by pressing the or button. l m ing fittings supplied with this prod- 3. Press the bu
ページ15に含まれる内容の要旨
Installation in cupboard Automax WITHOUT oven With AUTOMAX you do not need To ensure the necessary air supply to to turn down the temperature. When the appliance, the top of any floor using AUTOMAX the zone gets full cupboard must be removed. If this is heat for a certain amount of time not done, the air supply will be cor- where after the cooking zone auto- respondingly reduced and the guar- matically adjusts to the setting you antee will be invalid. have chosen. The distance between the lower
ページ16に含まれる内容の要旨
Mounting The unit may be mounted in any AUTOMAX Settings type of kitchen worktop with a thickness of 28 to 40 mm. Food types Cooking process Notes Time to automatic cutout Steaks Quick frying Fry 3-4 min per side A7-A8 2½ mins depending on thickness. Turn regularly Schnitzels 360 mm Frying 1 Meat balls A6-A7 1½-2 mins HOB Fried eggs BUNDHYLDE 49 mm 38 mm Sausages min. 20 mm Pancakes BASE SHELF Gentle frying Fritters A6-A7 1½-2 mins 340 mm 2 10 mm Potatoes 250 mm Boiling/ Use little wat
ページ17に含まれる内容の要旨
Installation Electrical Installation Safety Switch-off If one of the keys are activated for Installation may only be per- more than 10 seconds (e.g. by a formed by a qualified elec- child, pot spillage etc.) the hob is trician or a person autho- automatically switched off. rised by the manufacturer. Work performed by an unqualified person may Autostop cause injury or damages to property and deteriorate the If by mistake one or more cooking hob. zones have not been switched off Autostop will aut
ページ18に含まれる内容の要旨
Technical Data Model FM 4803K-an: Activating the Child Safety Device Product measurements: With the child safety function chil- Width: 360 mm dren can be prevented from turning Depth: 520 mm Height: 49 mm on the hob unintentionally. When the child safety is activated Build-in measurements: you can still use the key and the k Width: 340 mm minute minder. Depth: 490 mm Height: 38 mm Activating the Child Safety Device Measurements / power 1. Turn on the hob, push the k Front cooking zone: 210 mm 2
ページ19に含まれる内容の要旨
Unpacking Check that the appliance has no Cancelling the Child Safety faults and is undamaged on delivery. 1. Push the key. k 2. Push the key for 3 seconds. j Transport Damages The control lamp for child safety turns off. Any damages resulting from a trans- port which you have not performed yourself must be communicated to the dealer within one week of receipt of the product. On the rating plate which is placed on the back of the product you will find the CE marking and the prod- uct’s serial nu
ページ20に含まれる内容の要旨
Cleaning and Maintenance Minute Minder Aluminium 3. Wipe the plate with a damp cloth Carry out daily cleaning with a well or kitchen paper. Stubborn stains Setting the Minute Minder wrung-out cloth. For more stubborn are removed by rubbing hard on The minute minder can only be used soiling, use a cloth or a soft plastic the stain with a cleaning liquid on when the timer is not in use. sponge together with washing-up paper towel. 1. Turn on the hob, push . liquid or all-purpose cleaner. k 4. Usin
