ページ1に含まれる内容の要旨
LTR
A4
MFC-580
Version B
Quick Setup Guide
Alternatively, if you cannot solve a problem:
THANK YOU!
Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions Web Site:
… FOR PURCHASING YOUR BROTHER MACHINE.
URL: http://solutions.brother.com
WE ARE SURE YOU WILL BE IMPRESSED WITH THE CONVENIENT WAY THAT YOUR
Call Brother Customer Service at: 0161 931 2354
NEW MACHINE PERFORMS SO MANY TASKS WITH GREAT RESULTS!
Follow these simple instructions in numerical order.
For greater detail, consult
ページ2に含まれる内容の要旨
Install the Ink Cartridges 7 A. Check that the power is turned on (by plugging in the power cord). • The bottom of the white shipping cover is wet with ink that will cause stains, so wipe it clean before The LCD shows: you place it down. CHECK CARTRIDGE • Do not throw away the white shipping cover. You will need it for future transportation. B. Open the control panel cover by pulling it toward you (1), then lift the C. Push the four coloured ink cartridge covers one at a time so they pop up. The
ページ3に含まれる内容の要旨
MFC-580 Control Panel Navigation Keys You can print a list of basic operational steps 1 by pressing Reports, . * Access the Menu * Go to next menu level * Accept an option * Scroll through the current menu level * Back to previous menu level * Forward to next menu level * Exit the Menu Select a Receive Set Date and Set Station ID 9 10 11 Mode Time Choose the mode that best suits your needs. Your MFC displays the date and time, and You should store your name and fax number to be prints it on ever
ページ4に含まれる内容の要旨
Setting Up the MFC and PC to Work Together Version B Before You begin ® • You must set up the hardware and install the Brother Drivers before you can use your MFC as a printer and scanner in any Windows application. • If you need a USB cable, you will need to purchase it. • If you have any problem for installation, visit us at: http://solutions.brother.com Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 metres).
ページ5に含まれる内容の要旨
Connect the MFC to your PC with Parallel Cable. Step 4. A. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. B. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computer’s parallel printer port, see the User’s Guide for your computer. Turn on the MFC by plugging in the power cord. Step 5. The installation of the Brother driver will automatically start. Step 6. Follow
ページ6に含まれる内容の要旨
® For Windows NT Workstation Version 4.0 Users Turn on the MFC by plugging in MAKE SURE THAT YOU FOLLOWED THE Step 3. the power cord. SET-UP INSTRUCTIONS ON PAGE 1 TO 3 BEFORE CONTINUING Follow the instructions on the Step 4. screen. Check that your computer is Step 1. turned on. ® Step 3. (Same step as Windows 95/98/98SE/Me/2000 Users , 1 to 11) You must be logged on as the Administrator. 12. Select Yes to restart your computer, and then click Finish. Connect the MFC to your PC Step 2. with the
