ページ1に含まれる内容の要旨
INSTALLATION, USE & CARE MANUAL
30” FREESTANDING DUAL FUEL RANGES
Models X304PIRX [M7S0PTU(4,6)X(2,5)D]
Models X304PIRBI [M7S0PTU(4,6)W(2,5)D]
Models X304PIRCR [M7S0PTU(4,6)D(2,5)D]
Models X304PIRGI [M7S0PTU(4,6)I(2,5)D]
Models X304PIRRO [M7S0PTU(4,6)R(2,5)D]
Models X304PIRVI [M7S0PTU(4,6)L(2,5)D]
Models X304PIRVE [M7S0PTU(4,6)V(2,5)D]
Models X304PIRBL [M7S0PTU(4,6)U(2,5)D]
Models X304PIRNE [M7S0PTU(4,6)N(2,5)D]
ページ2に含まれる内容の要旨
From the desk of the President Dear new owner of a Bertazzoni product, I want to thank you for choosing one of our beautiful PRO ranges. We know that you have many brands and products to choose from and we are thrilled that you have decided to take one of your products into your home. We take as much pride in making our ranges as we hope you will in owning them. My family started manufacturing cooking appliances in 1882. Each of BERTAZZONI SpA our products is a blend of Itali
ページ3に含まれる内容の要旨
TABLE OF CONTENTS WARRANTY AND SERVICE........................................................................................................................................ 5 CUSTOMER SERVICE.......................................................................................................................................................5 REPLACEMENT PARTS ...................................................................................................................................
ページ4に含まれる内容の要旨
BAKE ..................................................................................................................................................................... 29 PREHEATING THE OVEN ..................................................................................................................................... 29 GETTING THE BEST RESULTS .............................................................................................................................. 29 BAKEWARE TY
ページ5に含まれる内容の要旨
WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labour warranty. Service on all Bertazzoni products shall be carried out by factory ‐trained professionals only. For warranty service please contact Customer Service at the numbers indicated below. CUSTOMER SERVICE English/Spanish hotline (866) 905 ‐0010 French (800) 561 ‐7625 Fax (714) 428 ‐0040 Email BERTAZZONIHELP@SERVICEPOWER.COM Mailing address SERVICEPOWER 1503 South Coast drive Suite 320 Co
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF THE PEOPLE LIVING IN IT. Save this Manual for local electrical inspector’s use. Read and save these instructions for future reference. Observe all governing codes, ordinances and regulations. WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or
ページ7に含まれる内容の要旨
WARNING! Read this instruction booklet before installing and using the appliance. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting the essential safety and operating characteristics. This appliance has been designed for non ‐professional, domestic use only. Do not use
ページ8に含まれる内容の要旨
PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and back) Weight Burner power Auxiliary 3400 BTU/h Semi ‐rapid 6100 BTU/h Rapid 10400 BTU/h Dual burner (inner) 2800 BTU/h Dual burner ( outer) 12000 BTU/h 8
ページ9に含まれる内容の要旨
WARNING! BEFORE INSTALLATION Do not use aerosol sprays in the vicinity of this This appliance shall only be installed by an appliance while it is in operation authorized professional. ROOM VENTILATION: An exhaust fan may be This appliance shall be installed in accordance used with the appliance; in each case it shall be with the manufacturer’s installation instructions. installed in conformity with the appropriate This appliance must be installed in accordance national and local
ページ10に含まれる内容の要旨
INSTALLING THE LEGS INSTALLING THE WORKTOP FRONTGUARD Bertazzoni ranges must be used only with the legs properly installed. To increase the clearance between the front edge of the worktop and the burners it is possible to Four height ‐adjustable legs are shipped with the install the worktop front guard shipped with the range in the polystyrene container situated over appliance. the appliance. To install the front guard, hold it with the pointed Before installing the legs, position
ページ11に含まれる内容の要旨
2 lateral screws from the bottom. INSTALLING THE BACKGUARD The back guard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The supplied back guard is a 2 ‐part assembly. The box also contains a set of metal screws for securing the back guard to the worktop. Disassemble the back guard and position the front part on the worktop. Align the screw holes with the corresponding holes at the back of the worktop. If the hol
ページ12に含まれる内容の要旨
INSTALLING THE ANTI ‐TIP Stability DEVICE INSTALLATION REQUIREMENTS The anti ‐tip bracket shipped with the range must be properly secured to the rear wall as shown in the picture below. ELECTRICAL The height of the bracket from the floor must be determined after the range legs have been A properly grounded and horizontally ‐mounted adjusted to the desired height and after the electrical receptacle Type NEMA 14 ‐50R should range has been levelled. be installed no higher than 3" (
ページ13に含まれる内容の要旨
EXHAUST HOOD INSTALLATION INSTALLATION ADJACENT TO KITCHEN This range will best perform when used with PRO CABINETS line Bertazzoni exhaust hoods. These hoods have This range may be installed directly adjacent to been designed to work in conjunction with the existing countertop high cabinets (36" or 91.5 cm Bertazzoni range and have the same finish for a from the floor). perfect look. For the best look, the worktop should be level For maximum performance, the height of the wit
ページ14に含まれる内容の要旨
‐ Connect the NEUTRAL receptacle terminal to ELECTRICAL CONNECTION the incoming NEUTRAL (WHITE) electrical The appliance shall be connected to a single supply wire phase electric line rated at 120/208Vac or ‐ Connect the GROUND receptacle terminal to 120/240Vac and 60Hz frequency. the incoming GROUND (GREEN) electrical supply wire Electric power rating: ‐ 120/208Vac: 4400 Watt or 21 A max. OPTION 2 - THREE-Wires connection: ‐ 120/240Vac: 5500 Watt or 24 A max. ‐ Connect the
ページ15に含まれる内容の要旨
4) Loose strain relief by unscrewing the two strain relief's screws as in diagram. 5) Remove damaged supply cord set by taking off the 4 electrical connection screws (block L1, N, L2 and Ground screw, see diagram) 6) Insert the new supply cord set in the strain relief and lock it with two strain relief's screws in suitable position. 7) Fix well the ring terminals G, L1, N, L2 of the new supply cord set as shown in diagram with its 4 screws 8) Re ‐install the back encl
ページ16に含まれる内容の要旨
WARNING! ELECTRICAL SHOCK HAZARD Disconnect electrical power at the circuit breaker box or fuse box before installing the appliance. Provide appropriate ground for the appliance. Use copper conductors only. Failure to follow these instructions could result in serious injury or death CAUTION Label all wires prior to disconnecting when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing
ページ17に含まれる内容の要旨
WIRING DIAGRAM 17
ページ18に含まれる内容の要旨
MANUAL SHUT ‐OFF VALVE GAS CONNECTION THIS VALVE IS NOT SHIPPED WITH THE All gas connections must comply with national APPLIANCE AND MUST BE SUPPLIED BY THE and local codes. The gas supply line (service) INSTALLER. must be the same size or greater than the inlet The manual shut ‐off valve must be installed in line of the appliance. This range uses a 1/2" NPT the gas service line between the gas hook ‐up on inlet (see drawing below for details of gas the wall and the appliance inlet,
ページ19に含まれる内容の要旨
GAS CONVERSION PRESSURE REGULATOR WARNING! Since service pressure may fluctuate with local Before carrying out this operation, disconnect demand, every gas cooking appliance must be the appliance from gas and electricity. equipped with a pressure regulator on the Gas conversion shall be conducted by a factory ‐ incoming service line for safe and efficient trained professional. operation. Call the customer service hotline to identify a The pressure regulator shipped with the fact
ページ20に含まれる内容の要旨
Consult the table on page 20 for matching nozzles to burners. STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm {socket wrench). Replace nozzles using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body. STEP 3: MINIMUM FLAME ADJUSTMENT WARNING! These
