ページ1に含まれる内容の要旨
USER’S GUIDE
DCP-110C
DCP-310CN
Version C
ページ2に含まれる内容の要旨
If you need to call Customer Service Please complete the following information for future reference: Model Number: DCP-110C and DCP-310CN (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: * The serial number is on the back of the unit. Retain this User’s Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. Register your product on-line at http://www.brother.com/registration By registering your pro
ページ3に含まれる内容の要旨
Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by relian
ページ4に含まれる内容の要旨
Safety precautions To use the DCP safely Please refer to these instructions for later reference and before attempting any maintenance. WARNING There are high voltage Do not handle the plug with wet electrodes inside the DCP. hands. Doing this might cause Before you clean the DCP, an electrical shock. make sure you have unplugged the power cord from the electrical socket. To prevent injuries, be careful To prevent injuries, be careful not to put your hands on the not to touch the area shade
ページ5に含まれる内容の要旨
WARNING This product must be installed near an electrical socket that is easily accessible. In case of emergencies, you must disconnect the power cord from the electrical socket in order to shut off power completely. Caution To maintain the best print quality, we recommend that you use the On/Off key to turn off your DCP. Do not unplug the power cord from the electrical socket, unless moving the machine or performing maintenance. If you need to disconnect your machine from the power, you w
ページ6に含まれる内容の要旨
Choosing a location Place your DCP on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the DCP near a standard, grounded electrical socket. Choose a location where the temperature remains between 10° and 35°C. Caution ■ Avoid placing your DCP in a high-traffic area. ■ Avoid placing your DCP on the carpet. ■ Do not place near heaters, air conditioners, water, chemicals, or refrigerators. ■ Do not expose the DCP to direct sunlight, excessive heat, moisture, or
ページ7に含まれる内容の要旨
Table of Contents 1 Introduction ..........................................................................1-1 Using this Guide ............................................................... 1-1 Finding information..................................................... 1-1 Symbols used in this Guide........................................1-1 Control panel overview ..................................................... 1-2 Status LED indications ...............................................1-4 Lo
ページ8に含まれる内容の要旨
™ 3 Walk-Up PhotoCapture Center .........................................3-1 Introduction.......................................................................3-1 ™ PhotoCapture Center requirements .....................3-2 Getting started ..................................................................3-3 Printing the Index (Thumbnails)........................................3-5 Printing images .................................................................3-6 DPOF printing................
ページ9に含まれる内容の要旨
Cleaning the scanner................................................ 5-18 Cleaning the DCP printer platen...............................5-19 Replacing the ink cartridges ..................................... 5-20 A Appendix ............................................................................. A-1 On-screen programming...................................................A-1 Menu table..................................................................A-1 Printing reports .....................
ページ10に含まれる内容の要旨
Introduction 1 Using this Guide Thank you for buying a Brother Digital Copier/Printer (DCP). Your DCP is simple to use, with LCD screen instructions to guide you through programming it. You can make the most of your DCP by reading through this Guide. Finding information All the chapter headings and subheadings are listed in the Table of Contents. You will be able to find information about a specific feature or operation by checking the Index at the back of this Guide. Symbols used in this G
ページ11に含まれる内容の要旨
Control panel overview 11 10 9 8 7 6 1 2 3 4 5 Menu Mode: Copy keys 2 1 (Temporary settings): Menu Copy Options Lets you access the Menu to program. You can quickly and easily select temporary settings for copying. or Enlarge/Reduce Press to scroll through the menus and options. Lets you enlarge or reduce copies depending on the ratio you select. Also you can use these keys to enter the number. Copy Quality Set Use this key to temporarily change the quality for copying. Lets you store yo
ページ12に含まれる内容の要旨
3 7 Stop/Exit Ink Management Stops an operation or exits from the Lets you clean the print head, check menu. the print quality and the available ink volume. 4 Mono Start 8 Scan Lets you start making copies in black and white. Lets you access Scan mode. Also, let you start a scanning 9 PhotoCapture operation (in colour or black, depending on the scanning setting Lets you access the PhotoCapture on your PC). ™ Center . 5 Colour Start Liquid Crystal Display (LCD) 0 Displays messages on t
ページ13に含まれる内容の要旨
Status LED indications The status LED (Light Emitting Diode) is a light that shows the DCP status. LED DCP status Description Ready The DCP is ready for use. Off Cover open The cover is open. Close the cover. (See Error messages on page 5-1.) Ink empty Replace the Ink cartridge with a new one. (See Replacing the ink cartridges on page 5-20.) Paper error Put paper in the tray or clear the paper jam. Check the LCD message. (See Troubleshooting and routine maintenance on page 5-1.) Red Out of
ページ14に含まれる内容の要旨
Load documents You can copy and scan from the scanner glass. Using the scanner glass You can use the scanner glass to copy or scan pages of a book or one page at a time. Documents can be up to A4 size (21.6 to 29.7 cm). 1 Lift the document cover. Place documents face down on the Scanner Glass 2 Using the document guidelines on the left, center the document face down on the scanner glass. 3 Close the document cover. If the document is a book or is thick, do not slam the cover or press on it
ページ15に含まれる内容の要旨
About paper The print quality can be affected by the type of paper you use in the DCP. To get the best print quality for the settings you’ve chosen, always set the Paper Type to match the type of paper you load. You can use plain paper, inkjet paper (coated paper), glossy paper, transparencies and envelopes. We recommend testing various paper types before purchasing large quantities. For best results, use the recommended paper. ■ When you print on inkjet paper (coated paper), transparencies
ページ16に含まれる内容の要旨
Handling and using special paper ■ Store paper in its original packaging, and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat. ■ The coated side of glossy paper is shiny. Avoid touching the shiny (coated) side. Load glossy paper with the shiny side facing down. ■ Avoid touching either side of transparencies, because they absorb water and perspiration easily, and this may cause decreased output quality. Transparencies designed for laser printers/copiers
ページ17に含まれる内容の要旨
1 - 8 INTRODUCTION Paper type and size for each operation Paper Type Paper Size Usage Copy PhotoCapture Printer Cut Paper Letter 216 x 279 mm (8 1/2" x 11") Yes Yes Yes A4 210 x 297 mm (8.3" x 11.7") Yes Yes Yes Legal 216 x 356 mm (8 1/2" x 14") Yes — Yes Executive 184 x 267 mm (7 1/4" x 10 1/2") — — Yes JIS B5 182 x 257 mm (7.2" x 10.1") — — Yes A5 148 x 210 mm (5.8" x 8.3") Yes — Yes A6 105 x 148 mm (4.1" x 5.8") — — Yes Cards Photo 102 x 152 mm (4" x 6") Yes Yes Yes Photo L 89 x 127 mm (3 1
ページ18に含まれる内容の要旨
Paper weight, thickness and capacity Paper Type Weight Thickness No. of sheets 2 Cut Paper Plain Paper 64 to 120 g/m 0.08 to 0.15 mm 100* (17 to 32 lb) (0.003" to 0.006") 2 Inkjet Paper 64 to 200 g/m 0.08 to 0.25 mm 20 (17 to 53 lb) (0.003" to 0.01") 2 Glossy Paper Up to 220 g/m Up to 0.25 mm 20 (Up to 58 lb) (Up to 0.01") 2 Cards Photo Card Up to 240 g/m Up to 0.28 mm 20 (Up to 64 lb) (Up to 0.01") 2 Index Card Up to 120 g/m Up to 0.15 mm 30 (Up to 32 lb) (Up to 0.006") 2 Post Card Up to 200 g/
ページ19に含まれる内容の要旨
Printable area The figures below show the unprintable areas on cut sheet paper and envelopes. Cut Sheet Paper Envelopes 34 34 1 1 2 2 ■ unprintable area 1Top 2Bottom 3Left 4Right Cut Sheet 3 mm 3 mm 3 mm 3 mm 1 1 1 1 (0 mm)* (0 mm)* (0 mm)* (0 mm)* Envelopes 12 mm 24 mm 3 mm 3 mm 1 * When you set the Borderless feature to On. ■ Printable area depends on the Printer driver settings. ■ The figures above are approximate and the printable area may vary depending on the type of cut sheet paper you
ページ20に含まれる内容の要旨
How to load paper, envelopes and post cards To load paper or other media 1 Pull the paper tray completely out of the DCP and remove the output paper tray. 2 Press and slide the paper side guide to fit the paper width. Paper Side Guide 3 Pull out the paper support and unfold the paper support flap. Paper Support Paper Support Flap Use the paper support flap for Letter, Legal and A4. INTRODUCTION 1 - 11
