ページ1に含まれる内容の要旨
QUICK LINKS
Contents
Index
®
Regulatory Compliance
Dome C3 Display
Product Information
DX/PCI Display Controller
Warranty
GETTING STARTED
About the Display
Package Contents
Reference Guide
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB C
ページ2に含まれる内容の要旨
Copyright © 2004 Planar Systems, Inc. All rights reserved. QUICK LINKS Contents Information in this document has been carefully checked for accuracy; however, no guarantee is America Sales given to the correctness of the contents. This document is subject to change without notice. Planar Index Planar Systems, Inc. provides this information as reference only. Reference to other vendors’ product does not imply 1195 NW Compton Drive Regulatory Compliance any recommendation
ページ3に含まれる内容の要旨
QUICK LINKS Contents Contents Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Index Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Regulatory Compliance Product Information About the Dome C3 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty Package Contents . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
QUICK LINKS Regulatory Compliance Contents This display has been tested and found to comply with IEC/EN 60601-1 and IEC/EN 60601-1-2 Index standards, and is certified to meet medical standard C22.2 No. 601.1-M1990 (C US Mark). Regulatory Compliance The medical display, in addition to meeting medical requirements, has been tested and found to Product Information comply with the limits for Federal Communications Commission (FCC) Class B computing devices in Warranty a typically co
ページ5に含まれる内容の要旨
This is informative data, not certification data. Certification data must be obtained by the device or QUICK LINKS system integrator according to Article 12 of the MDD titled “Particular procedure for systems and Contents procedure packs.” Paragraph 2 clearly outlines the device or system integrator’s responsibility in Index this matter. Regulatory Compliance In summary, Planar Systems, Inc. is CE-marking these displays under the Medical Device Directive, Product Information whi
ページ6に含まれる内容の要旨
European Union Declaration of Conformity for Medical Application QUICK LINKS Contents A Declaration of Conformity has been filed for this product. For additional copies of the Declaration of Conformity document, contact Planar Systems, Inc. Index The Dome C3 digital flat-panel display meets the essential health and safety requirements, Regulatory Compliance is in conformity with, and the CE marking has been applied according to the relevant Product Information EU Directives li
ページ7に含まれる内容の要旨
FCC Compliance Statement QUICK LINKS Contents Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable Index protection against harmful interference in a residential installation. This equipment generates, Regulatory Compliance uses, and can radiate radio frequency energy and, if not installed and used in accordance with Product Inform
ページ8に含まれる内容の要旨
QUICK LINKS Product Information Contents The design of the Dome C3 digital flat-panel display takes into account every known Index Safety tips measure to ensure your personal safety. Improper use of the display can result in electric Regulatory Compliance shock, fire, or damage to the display. Read all instructions before setting up the display. • Never open the Dome C3 display case, even when the power is off. Product Information Dangerous voltag
ページ9に含まれる内容の要旨
QUICK LINKS To set up the display properly Contents • Allow the display to warm up to room temperature before turning it on, particularly if Reasons to disconnect power the unit is cold from shipping or storage. Index • Power cord is damaged. • Avoid sudden temperature changes. Sudden changes may cause condensation that Regulatory Compliance can damage the display. Liquid spills inside the • Product Information display case. Turn off your compute
ページ10に含まれる内容の要旨
QUICK LINKS To clean the LCD screen Contents 1 Unplug the power supply. Maintenance tips Index 2 Dampen a clean, soft nonabrasive cloth with isopropyl alcohol. • Use a clean, lint-free, absorbent Regulatory Compliance Wipe the screen gently. 3 cotton cloth to clear off any Product Information residual glue from removal of 4 Dry the screen with a clean, soft nonabrasive cloth to remove any residue. the protective film. Warranty Shipping/storing th
ページ11に含まれる内容の要旨
QUICK LINKS About the Dome C3 Display Contents Systems requirements The Dome C3 display system consists of a 528-mm (20.8-in.) TFT LCD panel and Index Computer system a DX display controller and driver. The display’s thin film transistors (TFTs), in Regulatory Compliance PCI slot per board a transmissive-type display, use an integrated cold cathode fluorescent tube (CCFT) Product Information backlight system. 50 MB hard disk space Warranty The display is designed for 3-meg
ページ12に含まれる内容の要旨
QUICK LINKS Package Contents Contents Unpacking and handling tips Index The Dome C3 display is a precision Regulatory Compliance instrument that requires proper care to maintain product operation and Product Information adherence to specification. Dome C3 LCD Warranty The Dome C3 display system contains the panel mounted Unpack the display and components items shown here. Speak with your sales GETTING STARTED on desk stand carefully. Improper handling may rep if any item is missing o
ページ13に含まれる内容の要旨
QUICK LINKS Identify the Components Contents Controls and connector ports Review this illustration of the back panel to identify controls and ports on Index 1 Reset button. Restores the the display unit. Regulatory Compliance display configuration to its Product Information default setting. Warranty 2 LED status lights. Provides information about the status of GETTING STARTED the display. See page 19 for About the Display more information. Package Contents 3 USB B (upstream) port Identify
ページ14に含まれる内容の要旨
QUICK LINKS Position the Display Contents You can adjust the tilt, height, viewing angle, and orientation of the display to maintain an ergonomic and comfortable viewing Index position. Before you unpack the display, select a suitable workspace for the display. You need a stable, level, and clean surface Regulatory Compliance near a wall outlet. Product Information Warranty Tilt range Height range GETTING STARTED Adjust the tilt angle of the display so that the screen faces Unfasten the stand
ページ15に含まれる内容の要旨
QUICK LINKS Contents Viewing angle Orientation mode Index Regulatory Compliance Swivel the display panel from side to side to adjust the Use both hands to turn the display 90 degrees clockwise to viewing angle. rotate the display between portrait and landscape modes. Product Information Warranty GETTING STARTED About the Display Package Contents Identify Components Position Display Desk Stand Features INSTALLING THE DISPLAY Set DIP Switch Install Display Controller Connect Video and Power Ins
ページ16に含まれる内容の要旨
QUICK LINKS Desk Stand Features Contents Unfasten the stand lock to adjust display height. Remove the stand cover to thread the power cord and DVI cable connections to Index the display. To activate the USB hub function, the display must be connected to a USB-compliant computer or another hub with Regulatory Compliance a USB cable. Even if the display is in power-saving mode, the USB devices function when they are connected to the USB ports Product Information (both upstream and downstream) o
ページ17に含まれる内容の要旨
QUICK LINKS Set the DIP Switch Contents Warning To enable VGA mode on the DX display controller, slide switch 1 on the DIP switch Index into the ON position. Enable VGA on only one board when you install multiple If you leave the computer turned Regulatory Compliance DX display controllers. on, you could get an electric shock Product Information and cause damage to the system Disable VGA on all DX display controller if you are using a separate VGA card. components. Warranty For single deskt
ページ18に含まれる内容の要旨
QUICK LINKS Install the Display Controller Contents Before you begin, choose a well-ventilated location with an adequate amount of space. Excessive heat cannot Index dissipate when display vents are blocked. Make sure a grounded AC outlet is within easy reach. Regulatory Compliance When installing multiple DX display controllers, install all boards before you install the display driver. Product Information Warranty Turn your computer off. Leave the power cord plugged into the grounded outlet. G
ページ19に含まれる内容の要旨
QUICK LINKS Connect Video Cable and Power Supply Contents Installation tips Turn your computer off. Leave the power cord plugged into the grounded outlet. Index Easy access to ports Use the Dome C3 display with the power supply and video cable shipped. The Regulatory Compliance For displays mounted on a desk universal external 12V DC power supply is the Ault MW122RA1223F02. Product Information stand, rotate the LCD panel from portrait to landscape for easy Warranty To connect the display ac
ページ20に含まれる内容の要旨
QUICK LINKS Install the Display Driver Contents Removing an existing driver Before you install the driver, remove any previously installed display driver for the Index If necessary, uninstall the 63-WINDX DX display controller from your computer system. Follow the procedure shown in Regulatory Compliance driver for the DX display controller the sidebar. before you install the 63-W2KDXPCI Product Information Use the following procedures to install the display driver on Windows XP and driver
