ページ1に含まれる内容の要旨
AOC 7KLR
AOC 7KLR
17 inch Color Monitor
User’s
Manual
by Envision Peripherals, Inc.
www.aocmonitor.com
Before operating your monitor, please read this
manual thoroughly.
AOC 7KLR
1
v2_123102
ページ2に含まれる内容の要旨
For Your Safety AOC 7KLR FCC Statement Notice This equipment has been tested and found to 1. The changes or modifications not expressly comply with the limits for a Class B digital device, approved by the party responsible for pursuant to Part 15 of the FCC Rules. These limits compliance could void the user's authority to are designed to provide reasonable protection operate the equipment. against harmful interference in a residential 2. Shielded interface cables and AC power cord, if insta
ページ3に含まれる内容の要旨
For Your Safety AOC 7KLR • The monitor is equipped with a three-pronged Precautions grounded plug, a plug with a third (grounding) • Do not use the monitor near water, e.g. near a pin. As a safety feature, this plug will only fit into bathtub, washbowl, kitchen sink, laundry tub, a grounded power outlet. If your outlet does not swimming pool or in a wet basement. accommodate the three-wire plug, have an electrician install the correct outlet, or use an • Do not place the monitor on an un
ページ4に含まれる内容の要旨
For Your Safety AOC 7KLR General Notes General Features: • Do not install the monitor near heat sources • 17" (43.2 cm) Color Monitor such as radiators or air ducts. • Crisp, Clear Display for Windows • Do not place monitor in direct sunlight or in • Supports Resolutions up to 1600 X 1200 pixels areas with excessive dust, mechanical vibration @75Hz or shock. ® • EPA ENERGY STAR • Save the original shipping carton and packing materials in case you need to ship your monitor. Be sure to repack
ページ5に含まれる内容の要旨
Before You Operate the Monitor AOC 7KLR Installing & Removing the Base AOC 7KLR 5 v2_123102
ページ6に含まれる内容の要旨
Before You Operate the Monitor AOC 7KLR Connecting the Wires Using the Power Cord Supplied 1. Connect the built-in video cable into the 15-pin Caution: Make sure the power cord is the correct connector on the back of your computer and type that is required in your area. This monitor tighten the two screws. has a universal power supply that allows operation in either 100/120V AC or 220/240V AC 2. Connect the power cord into your monitor's voltage areas (no user adjustment is required). power
ページ7に含まれる内容の要旨
Before You Operate the Monitor AOC 7KLR Connecting the Wires Using An Optional Power Cord (Not Supplied) The power cord supplied with your monitor can Follow these steps: only be connected to a grounded electrical wall 1. Connect the built-in video cable into the 15-pin socket or power strip. connector on the back of your computer and If you wish to connect your monitor to a power tighten the two screws. supply using the power input socket on the back of 2. Connect the power cord into your
ページ8に含まれる内容の要旨
Operating Instructions AOC 7KLR Front Panel Buttons Shuttle Knob: Press this knob to open the Power: Press this button to put the monitor OSD window or select a highlighted function. into Off mode. The power indicator will turn Rotate this knob to switch functions or adjust orange. Press and hold this button again to settings. restore the monitor to normal operation mode. Power Indicator: A green light indicates that the monitor is on. An orange light indicates that the monitor is in Off
ページ9に含まれる内容の要旨
Operating Instructions AOC 7KLR Adjusting the OSD Settings 1. Press the Shuttle Knob to open the OSD 5. To save and exit, select the exit function or window. leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2. Rotate the Shuttle Knob until the desired 2-4. function is highlighted. Note: When the OSD window is open, the input 3. Press the Shuttle Knob again to open the signal timing settings appear at the top. function’s window. H: stands for
ページ10に含まれる内容の要旨
Operating Instructions AOC 7KLR Plug & Play DDC1/2B Feature Windows INF Driver File This monitor is equipped with VESA DDC1/2B Most computers will automatically configure your capabilities according to the VESA DDC monitor to work with your computer. For optimal STANDARD. It allows the monitor to inform the viewing of your monitor, download the AOC host system of its identity and, depending on the monitor driver. level of DDC used, communicate additional information about its display capabi
ページ11に含まれる内容の要旨
Technical Support (FAQ) AOC 7KLR Problem Possible Solution Power LED is not ON • Make sure the power cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play • Confirm that your computer is Plug & Play compatible. • Confirm that your video card is Plug & Play compatible. • Inspect the video cable and make sure that none of the pins are bent. • Make sure the AOC monitor drivers are installed (AOC monitor drivers are available at: www.aocmonitor.com) Picture i
ページ12に含まれる内容の要旨
Appendix AOC 7KLR Specifications Input Video Red, Green, Blue CRT Size 17.0" (43.2 cm) Analog Interface 11.4” (29 mm) neck Separate H/V TTL Sync. 0.21mm(H), 0.25mm(D) dot H/V Sync. Positive/Negative pitch H-Frequency 30 kHz - 95 kHz 90 degree V-Frequency 50 Hz -160 Hz deflection Input Analog: Video 0.7 Vpp, Viewable image size 16.0” (40.6 cm) Signal 75 OHM, Positive diagonal Power Source Universal AC Preset Display area 11.8” (300 mm) X 100 - 240 V 9.1” (230 mm) 50/60 Hz Dot Clock 200 M
ページ13に含まれる内容の要旨
Appendix AOC 7KLR Specifications (continued) Environmental Operating Temp: Considerations 32° to 104°F (0° to 40°C) ambient Operating Humidity: 10% to 85% relative, non-condensing Signal Cable Attached Mini D-sub 15 Male Optimal Viewing Mode: 1024 x 768 x 85 Hz AOC 7KLR 13 v2_123102
ページ14に含まれる内容の要旨
Appendix AOC 7KLR Factory Preset Timing Table Resolution Horizontal Vertical Standard (in pixels) Frequency Frequency VGA 720 × 400 31.5 kHz 70 Hz 640 × 480 31.5 kHz 60 Hz VESA / 85 640 × 480 43.3 kHz 85 Hz 800 × 600 53.7 kHz 85 Hz 1024 × 768 68.7 kHz 85 Hz 1280 × 960 85.9 kHz 85 Hz 1280 × 1024 91.1 kHz 85 Hz VESA / 75 1600 × 1200 93.8 kHz 75 Hz AOC 7KLR 14 v2_123102
ページ15に含まれる内容の要旨
Appendix AOC 7KLR Connector Pin Assignment Pin Number Description Pin Number Description 1Red 9 NC 2 Green 10 Ground 3 Blue 11 Monitor Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync / *V-Clk 7 G-Ground 15 DDC-Serial Clock 8 B-Ground * For DDC AOC 7KLR 15 v2_123102
