ページ1に含まれる内容の要旨
®
ViewSonic
VE510b/VE510s
LCD Display
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Podr ęcznik u żytkownika
- Használati útmutató
- Py ков одств о по льэ ова т е ля
- Uživatelská píruka
- ユー ザ ーズ ガ イ ド
- 使用手冊
- 使用手冊
- 사용자 안내서
-
ページ2に含まれる内容の要旨
Content Compliance Information.............................................................................. 1 Important Safety Instructions...................................................................... 2 Product Registration................................................................................... 3 For Your Records ....................................................................................... 3 Getting Started Package Contents .........................................
ページ3に含まれる内容の要旨
Compliance Information For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there i
ページ4に含まれる内容の要旨
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized
ページ5に含まれる内容の要旨
Copyright© ViewSonic Corporation, 2004. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are
ページ6に含まれる内容の要旨
Getting Started ® Congratulations on your purchase of a ViewSonic LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” refers to Microsoft Windows 95, 98, NT, XP, 2000 and Me (Millennium Edition). Package Contents IMPORTANT: Save all packing material. Your LCD display package includes: • LCD display • Power cord • ViewSonic Wizard CD-ROM NOTE: The CD jacket contains the Quick Start Guide, and the CD includes User Guide PDF fi
ページ7に含まれる内容の要旨
Quick Installation Optional: For instructions on wall mounting, If your computer does not have a CD-ROM see page 6 of this user guide. drive, see “Customer Support.” (1) Wait for the CD-ROM to auto-start. 1 Connect power cord NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in the 2 Connect video cable Windows Explorer, then double-click on viewsonic.exe. • Make sure both the LCD display and (2) Follow the on-screen instructions. computer are turned OFF • Connect th
ページ8に含まれる内容の要旨
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: 1 Disconnect Power. 2 Push the LCD display back and down flat against the base as shown. 3 Lay the LCD display face down on a towel or blanket. Notice the four screw holes on the rear cover. Four screw 4 Attach the mounting b
ページ9に含まれる内容の要旨
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; ® example 60 Hz). After setting the timing mode, use the OnView controls to adjust the screen image. For the best picture quality set your LCD display timing mode to: VESA 1024 x 768 @ 60 Hz. To set the Timing Mode: 1 Set the resol
ページ10に含まれる内容の要旨
Adjusting the Screen Image ® Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 10. Main Menu with OnView controls Front Control Panel Power light Displays, saves Scroll through menu changes to, and exits options and adjust the the Main Menu. displayed control. Selects a highlighted control. Also, Power On/Off displays
ページ11に含まれる内容の要旨
Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. Main Menu AUTO SET Auto Adjust Contrast/Brightness Color Adjust i Information Image Adjust ? Setup Menu Memory Recall 1:EXIT 2:SELECT NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 11. 2 To highlight a control you want to adj
ページ12に含まれる内容の要旨
Main Menu Controls Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: Auto Adjust works with most common video cards. If this function does not work on your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. Contrast adjusts the differen
ページ13に含まれる内容の要旨
Control Explanation User Color — Individual adjustments for red (R), green (G), and blue (B). To select color (R, G or B) press button [2]. 1 2 To adjust selected color, press ▲ or ▼. Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset. Information displays the timing mode (video signal input) i coming from the graphics card in your computer. See your graphic card’s user guide for instructions on chang
ページ14に含まれる内容の要旨
Control Explanation Fine Tune sharpens focus by aligning the illuminated text and/ or graphic characters. NOTE: Try the Auto Adjust (see page 9) before using the Fine Tune control. Sharpness adjusts the clarity and focus of the screen image. Setup Menu displays the menu shown below. ? Setup Menu Language Select Resolution Notifier OSD Position OSD OSD Timeout 1:EXIT 2:SELECT The Setup Menu controls are explained below. Language Select allows you to choose the lan
ページ15に含まれる内容の要旨
Control Explanation Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed in this user guide. ViewSonic VE510b/VE510s 13
ページ16に含まれる内容の要旨
Other Information Specifications Type 15" (full 15" viewable diagonal area), TFT (Thin Film LCD Transistor), Active Matrix XGA LCD, 0.297mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare +20° , -5° Panel tilt Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) Input signal Separate Sync, f :30-62 kHz, f :50-75 Hz h v PC Up to 1024 x 768 Non-interlaced Compatibility 1 Power Macintosh up to 1024 x 768 Macintosh 1024 x 768 @
ページ17に含まれる内容の要旨
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Make sure the video cable supplied with the LCD display is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the LCD
ページ18に含まれる内容の要旨
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. T = Telephone Country/Region Website Email F = FAX T= (800) 688 6688 United States www.viewsonic.com/support service.us@viewsonic.com F= (909) 468 1202 T= (886) 463 4775 Canada www.viewsonic.com/support service.ca@viewsonic.com F= (909) 468 1202 T= (0800) 833 648 United Kingdom www.viewsoniceurope.com service.eu@viewsoniceurope.com F= +44 (0) 129
ページ19に含まれる内容の要旨
Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2. If still not clean, apply a small amount of a non-
ページ20に含まれる内容の要旨
Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ® ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LCD d
