ページ1に含まれる内容の要旨
OWNER ’S MANUAL
LCD Color Monitor
Owner ’s Record
The model number and serial number are on the
P1550LA
back of your monitor. Record these numbers in the
spaces below Refer to these numbers whenever
P1750LA
you communicate with your Toshiba dealer about
this monitor.
P1950LA
Model Number:
Serial Number:
C
2005 TOSHIBA CORPORATION
All Rights Reserved
Part Number: V.1.0
ページ2に含まれる内容の要旨
Important Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF. The exclamation point in the triangle tells you that important operating and maintenance instructions follow this symbol. CAUTION: TO PREVENT
ページ3に含まれる内容の要旨
Important Information FCC compliance information in USA FCC Declaration of Conformity Compliance Statement (Part 15): The Toshiba LCD Color Monitor complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for compliance to these rules is: TOSHIBA AME
ページ4に含まれる内容の要旨
Important Information 11. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 12. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the ant
ページ5に含まれる内容の要旨
Table of Contents Important Information … … … … … … … … … … … … … … … … … … … … … … … … … … 2 Table of Contents … … … … … … … … … … … … … … … … … … … … … … … … … … ….. 5 Exploring your New Monitor … … … … … … … … … … … … … … … … … … … … … … …. 6 Front Panel … … … … … … … … … … … … … … … … … … … … … … … … … … …. …. 6 Back … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … …. 6 Side … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … …. 6 Selecting a Location for the
ページ6に含まれる内容の要旨
Exploring your New Monitor You can operate your Monitor by using the buttons on the front panel. The side panels provide the inputs to connect other equipment to your Monitor. Front Panel P1550LA P1750LA P1950LA Back Side Audio 2 Audio 2 IN OUT Audio 1 Audio 1 IN OUT S S--V Vid id ee o o IN Video 2 OUT Video 2 IN Video 1 OUT Video 1 IN PC Aud
ページ7に含まれる内容の要旨
Selecting a Location for the Monitor Place the Monitor on the floor or on a sturdy platform in a location where light does not directly hit the screen. Place the Monitor far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the Monitor. Caution: When using the back stand, please be careful since in some angles, the Monitor may fall over to the front. When using the back stand , please be careful not to cat
ページ8に含まれる内容の要旨
Connecting a DVR (Digital Video Recorder) This connection allows you to watch DVR. Audio 2 Audio 2 IN OUT Audio 1 Audio 1 IN OUT S S--V Viid de eo o IN Video 2 Audio Out DVR OUT Video 2 IN Video 1 OUT Video 1 IN Monitor Out You will need: • Standard Audio cables • BNC video cables Connecting a camera This connection allows you to watch camera. Audio 2 Audio 2 IN
ページ9に含まれる内容の要旨
Connecting a PC (Personal Computer) Before you connect this PC to your monitor, change the adjustment of your PC ’s Resolution and Refresh rate. See “Monitor Display modes ”. Connect one end of a (male to male) VGA cable to the video port of the computer and the other end to the VGA connector at the back of the monitor. Fix the connectors firmly with the screws on the plug. Turn on the computer and Monitor. The monitor can be operated as the computer monitor. Aud
ページ10に含まれる内容の要旨
Rack Mount Mounting the monitor on the rack Rack Mount Note: When adjusting to a rack, you will need to use an optional rack mount to the back side of the LCD monitor. Optional rack mount will be sold separately. Arm Mount (VESA standard) When adjusting the VESA Standard Arms to the back side of the LCD monitor, please use t
ページ11に含まれる内容の要旨
Setting up your Monitor 1. Turning on the monitor Press the POWER. : The power indicator lamp (green) will light and the image will be displayed. Press the POWER again. : The power indicator lamp (red) will light and the power will be turned off. 2. Switching the input source Press the INPUT. : Each press will switch the source in order. 3. Selecting the mode and changing the adjusted value (when the MONITOR SETUP screen is disp
ページ12に含まれる内容の要旨
General Setup TOSHIBA Language English Back Light 100 Power on Option None Power Latching ON Key Lock OFF Display OFF Volume 50 Exit OSD Language: Allow user to select the Languages in English, French and Spanish. Backlight: Allow user to adjust the panels backlight luminance. When pressing the up down button, the number displayed will not be in serial order. Power on Option: Setting the video input prior
ページ13に含まれる内容の要旨
Video Setup TOSHIBA Brightness 100 Contrast 100 Color 100 Hue 0 Sharpness 100 Color Temp 9300 Video System NTSC Over Scan LARGE Default Exit OSD Brightness: Adjust the overall picture shade and brightness. Contrast: Provide adjustment for contrast between light and dark areas of the picture When pressing the up down button, the number
ページ14に含まれる内容の要旨
PC-In Setup TOSHIBA Auto OFF Brightness 100 Contrast 100 H – Position 100 V – Position 100 Clock 100 Phase 100 Color Temp 9300 White Balance Default Exit OSD Auto: Auto-optimize displaying picture under PC mode. Brightness: Adjust the overall picture shade and brightness. Contrast: Adjusts the contrast between light or dark areas of the picture H-Position: Adjusts the horizontal
ページ15に含まれる内容の要旨
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solution. Symptom Solution Monitor will not turn on ● Make sure the power cord is plugged in, then press POWER button. No picture, no sound ● Check cable connections. There is no sound in “Video Loss ”. No sound, picture OK ● Check audio Cable Connections ● Try p
ページ16に含まれる内容の要旨
LCD Color Monitor Specifications Model Number P1550LA P1750LA P1950LA Panel Size 15.0 ” 17.0 ” 19.0 ” Aspect Ratio 4:3 4:3 4:3 640 x 480 640 x 480 640 x 480 @ 60/72/75 @ 60/72/75 @ 60/72/75 800 x 600 800 x 600 800 x 600 @ 56/60/72/75 @ 56/60/72/75 @ 56/60/72/75 Resolution / Scan 1024 x 768 1024 x 768 1024 x 768 @ 60/70/75 @ 60/70/75 @ 60/70/75 1280 x 1024 1280 x 1024 @ 60/75 @ 60/75 2 2 2 Brightness 250cd/m (*1) 250cd/m (*1) 250cd/m ( 1) Viewing Angle(H/V) 130°
ページ17に含まれる内容の要旨
LCD Color Monitor Dimensions 1
ページ18に含まれる内容の要旨
LIMITED WARRANTY The Imaging Systems Division of Toshiba America Information Systems, Inc.( “ ISD) makes the following limited warranties with regard to this LCD Monitor( “ Product ” ). These limited warranties extend to the original End-User ( “ You[r] ” ). One(1) Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a period of one(1)year from the date of purchase by the original End-User. During this one (1)
