ページ1に含まれる内容の要旨
Contents
Introduction........................................................................................................................................1
Notational conventions ..............................................................................................................2
Important notes .................................................................................................................................2
Safety...................................................
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Introduction Your new LCD (Liquid Crystal Display) monitor 43B1-M offers numerous features and functions, for example: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • height adjustment and ability to turn (portrait mode) • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) • high degree of brightness and good contrast • high resolution (1280x1024) for displayin
ページ4に含まれる内容の要旨
Colour monitor 43B1-M Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! Supplementary information, remarks, and tips follow this symbol. i Ê Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms.
ページ5に含まれる内容の要旨
Colour monitor 43B1-M • In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our Help Desk. • The screen background lighting contains mercury. You must observe the applicable handling and disposal safety regulations for fluorescent tubes. • Only qualified technicians should repair the device. Unauthorised opening and incorrect repair may greatly endanger the user (electr
ページ6に含まれる内容の要旨
Colour monitor 43B1-M If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dea
ページ7に含まれる内容の要旨
Colour monitor 43B1-M Power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. • The female/male receptacles of the cord set must meet CEE-22 requirements. • The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors. • For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. Fo
ページ8に含まれる内容の要旨
Colour monitor 43B1-M Checking the contents of the consignment Ê Unpack all the individual parts. Ê Check the delivery for damage incurred during transportation. Ê Check whether the delivery agrees with the details in the delivery note. The complete LCD monitor package includes: − a monitor with permanently connected data cable − a power adapter with power adapter cable − one power cable − one floppy disk − one Warranty Booklet − this Operating Manual Should you discover that the delivery does n
ページ9に含まれる内容の要旨
Colour monitor 43B1-M Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. edge of desk permissible permissible reaching sector reaching sector 600 mm 600 mm Avoid direct and reflected glare. Avoid glare from electric Position the keyboard where it lighting. is easiest to reach. preferable viewing sector approx. 90° 0° 0° 65° 30° 60° 30
ページ10に含まれる内容の要旨
Colour monitor 43B1-M 2 3 4 1 Ê Be sure that the monitor and the computer are switched off. The computer power plug must be pulled out! ! The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the computer. Ê Connect the connector of the data cable to the active monitor port on the computer and secure the plug-in connection by tightening the safety screws (1). If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the
ページ11に含まれる内容の要旨
Colour monitor 43B1-M Tilting and turning area The typical monitor base allows you to adjust the tilt of the display by 5° forward and by 25° back. 25 5 Operation of the monitor 1 2 3 4 10 5 6 7 9 8 1 = AUTO button 6 = Power button 2 = Brightness 7 = Headphones port 3 = Contrast 8 = Volume control 4 = MENU button 9 = Audio input 5 = Power indicator 10 = Security slots for Kensington Lock Anti-theft protection A lock (Kensington Lock) can be mounted in the security slots (10) to protect
ページ12に含まれる内容の要旨
Colour monitor 43B1-M Switching the monitor on/off The ON/OFF switch (6) is used for switching the monitor on and off. The power indicator (5) glows green when the monitor and computer are switched on. The power indicator glows amber when the monitor does not receive a video signal or is in the energy-saving mode. The power indicator goes off when the monitor is switched off. When you switch the computer system on, you must proceed in the following order: Ê First switch the LCD monitor on with t
ページ13に含まれる内容の要旨
Colour monitor 43B1-M Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor adjustment with a test pattern If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT, Windows Me, Windows 2000 or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set with the floppy disk sup
ページ14に含まれる内容の要旨
Colour monitor 43B1-M Adjusting the contrast Ê Press the button to activate the setting window for contrast (Contrast). Ê Set the contrast with the or buttons, until the picture appears correct. Ê Press the AUTO button to save the settings and to switch the OSD menu off. If you make no changes for 60 seconds, the settings will automatically be saved and the OSD menu will be deactivated. Monitor settings using the OSD menu You can use the buttons on the control panel to set the screen disp
ページ15に含まれる内容の要旨
Colour monitor 43B1-M If you want to change other settings, select the corresponding function from the main menu. All possible adjustments of the monitor are described in the following. Setting the contrast of the display (Contrast) If the contrast is set too high, bright grey levels can no longer be distinguished from very bright grey levels. If the contrast is set too low, the maximum brightness will not be achieved. Setting the brightness of the display (Brightness) Setting the Black level Wi
ページ16に含まれる内容の要旨
Colour monitor 43B1-M Locking the OSD menu (OSD Lock) The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. Ê Switch your monitor off. Ê Press and hold down the and buttons and switch on the monitor simultaneously. The OSD menu is locked. If you press the MENU button and the OSD menu is locked, the message OSD locked appears on the screen. After OSD is locked brightness and contrast shortcuts and AUTO LEVEL function are still available. Please pr
ページ17に含まれる内容の要旨
Colour monitor 43B1-M Technical data Dimensions and weight (LCD monitor) Visible diagonals: 43,2 cm Dot pitch: 0,264 mm Screen size: 339,70 mm x 272,10 mm Maximal resolution: 1280x1024 pixel 2 Luminance: 250 cd/m (typical) Dimensions (W x H x D) incl. monitor base: 407 mm x 427 mm x 195 mm Turning area: 5° forward, 25° back Weight: approx. 5.5 kg Accessories: Power cable (1.8 m), power adapter, audio cable Storable display modes: 18 Electrical data Rated mains voltage: 100 V - 240 V (±10 %) Freq
ページ18に含まれる内容の要旨
Colour monitor 43B1-M VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings. If the monitor 43B1-M is not yet di
ページ19に含まれる内容の要旨
Colour monitor 43B1-M Pin assignment D-SUB 5 1 10 6 15 11 Pin Meaning Pin Meaning 1 Video input red 9 +5 V for DDC 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 Ground 12 DDC-Data 5 DDC ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground Trouble shooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you ar
ページ20に含まれる内容の要旨
Colour monitor 43B1-M No display (power indicator lights) Ê Check whether the computer is switched on. Ê Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. Ê Press any key on the computer keyboard – the computer may be in energy saving mode. Ê Alter the brightness and/or contrast until you get a picture. Picture disturbances (vertical and horizontal lines, picture noise) Ê Perform auto-adjustment. If one of the operating systems Windows for Wo
