ページ1に含まれる内容の要旨
Important Information
SCEPTRE X24 Page1
ページ2に含まれる内容の要旨
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectio
ページ3に含まれる内容の要旨
European Notice CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Canadian Doc Notice For Class B Computing Devices This digital apparatus does not exceed the Class B limit
ページ4に含まれる内容の要旨
Important Information Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the ser
ページ5に含まれる内容の要旨
Tips and Safety Precautions This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference. • To avoid the risk of electric shock or to smoke or mois
ページ6に含まれる内容の要旨
• The X24 LCD MONITOR is equipped immediately. Do not try to repair the with a three-pronged grounded plug, product yourself. a plug with a third (grounding) pin. • Avoid using dropped or damaged This plug will fit only into a grounded appliances. If the product is dropped power outlet as a safety feature. If and the housing is damaged, the your outlet does not accommodate internal components may function the three-wire plug, have an abnormally. Unplug the power cord electrician install t
ページ7に含まれる内容の要旨
Table of Contents Important Information...................................................................... 1 FCC Compliance Statement............................................................ 2 Important Information...................................................................... 4 Tips and Safety Precautions ........................................................... 5 Table of Contents ............................................................................ 7 Opening th
ページ8に含まれる内容の要旨
If You Have HDMI Connection on Your DVD Player…........... 31 If You Have HDMI Connection on Your HD Box… ................. 32 If You Have HDMI Connection on PlayStation® 3… .............. 33 Connections to PC on the LCD with (optional) HDMI.................... 34 If You Have DVI Connection on Your Video Card…............... 34 If You Have VGA Connection on Your Video Card….............. 35 On Screen Display (OSD) Menu................................................... 36 AUTO ADJUST
ページ9に含まれる内容の要旨
Dear SCEPTRE Customer, Congratulations on your new SCEPTRE monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LCD monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor. For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at monitor-ts@SCEPTRE.com.
ページ10に含まれる内容の要旨
Opening the Package The SCEPTRE X24 is packaged in a carton together with standard accessories. The weight of the LCD display is approximately 13.1 lbs. Since the LCD panel can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding. When opening the carton, make sure the product is in good condition and that all the standard accessories and items are included. After unpacking y
ページ11に含まれる内容の要旨
Installing the Base 1. Please place the base on a flat surface (i.e. table). Hold the monitor directly 90 degrees above the base. Connect the monitor to the base by inserting the monitor into the base. 2. After the monitor is connected to the base, take a look at the bottom of the base. In the square opening of the metal plate, move the two plastic plates outwards to lock the stand. Your monitor is ready for use. SCEPTRE X24
ページ12に含まれる内容の要旨
Setting Up Your Monitor The following are general short steps to setup and use the monitor with your PC under the Microsoft Windows XP operating system. 1. After you have installed the base, connect your VGA or DVI cord to both the monitor and PC and turn on the PC and the monitor. 2. While booting up keep pressing F8 and choose the VGA mode option. 3. Under Windows, use your mouse to right click on the background with nothing selected. Left click on the PROPERTIES option. Click on th
ページ13に含まれる内容の要旨
Mounting Preparations 1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. Unscrew the 4 screws that lock the arm to the monitor. 2. Once the 4 screws are removed, the stand will slide off. SCEPTRE X24 Page13
ページ14に含まれる内容の要旨
3. The monitor is ready for mounting. Please note : The mounting pattern of the monitor is 100mm x 100mm using M4 metric system screws. The screw depth of the mounting pattern should not exceed 8mm. Page14 SCEPTRE X24
ページ15に含まれる内容の要旨
Identifying Front and Rear Panel Front View POWER INDICATOR : If light is blue, the monitor is turned on. If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer. NATIVE RESOLUTION : This monitor’s clearest picture is produced under its native resolution. The native resolution of the monitor is 1920 x 1200 at 60 Hz refresh rate. SCEPTRE X24 Page15
ページ16に含まれる内容の要旨
Side View Control Buttons The following buttons are facing downwards in the center of the monitor. – This button turns the monitor ON or OFF. ▲/ + – While in the OSD this button acts as a navigation button moving your selection to the next one. If you entered the function this button acts as the increase adjustment button. This button also functions as a BRIGHTNESS adjustment hotkey. M / ↵ – This is the MENU button. It opens the On Screen Display (OSD)
ページ17に含まれる内容の要旨
Side View Tilt Angle The LCD Monitor’s angle settings range from 0° to 10°. SCEPTRE X24 Page17
ページ18に含まれる内容の要旨
Rear View Mounting Specification : 100mm x 100mm using screw size M4 metric system screws. The Depth of the mounting pattern should not exceed 8mm. Page18 SCEPTRE X24
ページ19に含まれる内容の要旨
Rear View Connections The following descriptions are from left to right. Audio Line In (OPTIONAL)* – This connection is for linking to the PC’s line out connection for transmitting audio signal to the monitor’s speakers. Do NOT connect a headset or external speakers to this connection. You can also use this connection for audio on game consoles or HD video devices by using a 3.5mm Mini-jack to Female RCA (red / white) audio conversion cable in conjunction with a regular RCA (
ページ20に含まれる内容の要旨
Understanding Your Cables & Connections Cable Corresponding Connection Name Cable Picture Picture DVI (digital video) VGA (analog video) 3.5 mm Mini-jack (OPTIONAL) HDMI* (OPTIONAL) Conversion Conversion Cable Picture Cable Name HDMI to DVI (optional accessory) 3.5mm Mini-jack to Female RCA Audio (optional accessory) VGA to Female Component YPbPr (optional accessory) *The optional HDMI port is only available in ce
