ページ1に含まれる内容の要旨
SyncMaster 971P
ページ2に含まれる内容の要旨
SyncMaster 971P Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The imag
ページ3に含まれる内容の要旨
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place hea
ページ4に含まれる内容の要旨
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor.
ページ5に含まれる内容の要旨
bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product,
ページ6に含まれる内容の要旨
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinner
ページ7に含まれる内容の要旨
the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cabl
ページ8に含まれる内容の要旨
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy
ページ9に含まれる内容の要旨
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your monitor to fall, and
ページ10に含まれる内容の要旨
SyncMaster 971P Model List of Features Magic Contrast: Implements a deep color contrast of 4000:1 ratio. Magic Speed: Provides a clear screen without afterimages with fast response speed of 6ms. Magic Stand: Provides a high availability to fit your environmental needs with a height adjustable stand (up to 60mm). Magic Rotation: Adjusts screen automatically to fit to monitor angle when it is changed with the Rotation function. Please make sure the following ite
ページ11に含まれる内容の要旨
Manual User's Guide, Warranty Card Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) AutoRotation software Cable 'DVI to D-SUB' Cable Power Cord DC-Adapter USB Cable (A-B Type cable) Others Cleaning Cloth Sold separately DVI Cable Do not use other cables except the dedicated cables, such as DVI/D-Sub and DVI cables, for the product. To purchase DVI/D-Sub or DVI cable additionally, contac
ページ12に含まれる内容の要旨
Customized Key You can customize key assignment for the Custom button according to [] your preferences. (Custom Key functionality) How to Adjust : MagicTune → Optional → Custom Key → MagicBright, MagicColor, Auto Setup, Source Select, Color Tone 1) MagicBright MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently seven different modes are available: Custom, Text, Internet, Game, Sport, Movie and Dynamic
ページ13に含まれる内容の要旨
When you press the power button, the monitor is on/off. >>Click here to see an animation clip 2) Input Source When you press the power button, the input source may be changed to Analog or Digital, blinking once with blue lihgt. >>Click here to see an animation clip 3) Auto adjustment When you press the power button, the Auto Adjustment function is activate, blinking twice with blue light. (Analog only) >>Click here to see an animation clip The buttons to the right of the monitor a
ページ14に含まれる内容の要旨
DVI : Connect the terminal of your monitor to your computer using a DVI DVI/D-Sub cable. DC 12V : Connect a power line to a direct current power supply and then plug it into the relevant power port. UP (USB upstream port): Connect the UP port of the monitor and the USB port of the computer with the USB cable. DOWN (USB downstream port): Connect the port of the USB monitor and a USB device DOWN with the USB cable. To use DOWN (Downstream Port), you ha
ページ15に含まれる内容の要旨
SyncMaster 971P Model Connecting the Monitor 1. Connect a power line to a direct current power supply and then plug it into the relevant power port. Use a connection appropriate for your computer. 2. 2-1. Using the D-Sub (analog) connector on the video card. Connect the DVI terminal of your monitor to the D-Sub terminal of your computer using a DVI/D-Sub cable. 2-2. Connected to a Macintosh. Connect the monitor to the Macintosh computer using the 'DVI to D-SUB' connection ca
ページ16に含まれる内容の要旨
Rotating the monitor Rotating the monitor (When pivoting the monitor, rotation angle is displayed on screen of the monitor.) 0° 90° When rotating the screen, make sure to tilt the monitor 45 to 65 degrees so that it does not touch the floor. When tilting the screen backwards, do not tilt it more than 65 degrees. Installing the Monitor Driver (Automatic) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver insta
ページ17に含まれる内容の要旨
4. If you can see following message window, then click the "Continue Anyway" button. ® ® Then click " " button. (Microsoft Windows XP Operating System) OK This monitor driver is under certifying MS logo, and this installation don't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows Vista | Windows XP | Windows 2000 |Win
ページ18に含まれる内容の要旨
3. Click "Personalization" and then "Display Settings". 4. Click "Advanced Settings…". 5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message “Windows needs…” is displayed, as shown in the figure below, click "Continue". This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The
ページ19に含まれる内容の要旨
7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer". 8. Click "Have Disk…" and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK". 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
ページ20に含まれる内容の要旨
® ® Microsoft Windows XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
