ページ1に含まれる内容の要旨
SyncMaster 225BW
Install driver Install programs
ページ2に含まれる内容の要旨
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.
ページ3に含まれる内容の要旨
Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place
ページ4に含まれる内容の要旨
Be sure to contact an authorized Service Center, when installing your monitor in a location with the heavy dust, high or low temperatures, high humidity, chemical substance and where it operates for 24 hours such as the airport, the train station or etc. Failure to do so may cause a serious damage to your monitor. Put your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause an electric shock or fire inside the monitor. Do not drop th
ページ5に含まれる内容の要旨
Set down the monitor carefully. The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches ) for ventilation purposes. Poor ve
ページ6に含まれる内容の要旨
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinn
ページ7に含まれる内容の要旨
could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center . The monitor may malfunction, causing an electric shock or fire. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. Failure to do so may cause an electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable.
ページ8に含まれる内容の要旨
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to e
ページ9に含まれる内容の要旨
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire. Do not place children’s favorite objects (or anything else that may be tempting) on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing physical damage or even death. Good Postures When Using the Monitor Try to maintain a good posture when using the monitor. Keep your back straight. K
ページ10に含まれる内容の要旨
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Monitor & Sliding Stand Type 2 Monitor & Speaker(option) & Sliding Stand Manual
ページ11に含まれる内容の要旨
User's Guide, Warranty Card Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) MagicTune™ software Cable D-sub Cable Power Cord DVI Cable (option) Speaker package(option) Speaker Front Opens the OSD menu. Also use to exit the OSD menu or return to MENU button [ ] the previous menu.
ページ12に含まれる内容の要旨
MagicBright™ is a new feature providing optimum viewing MagicBright™ environment depending on the contents of the image you are [] watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button. 1) Custom Although the values are carefully chosen by our engineers, the pre-configured values may no
ページ13に含まれる内容の要旨
(The configuration at the back of the monitor may vary from product to product.) POWER IN Connect the power cord for your monitor to the power port on the back of the monitor. DVI IN Connect the DVI Cable to the DVI port on the back of your monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your RGB IN monitor. Switch the monitor on and off. ON [ | ] / OFF [O] Kensington Lock The Kensington lock is a device used to physically fix the system when using it
ページ14に含まれる内容の要旨
Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. 1. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] Using the DVI (Digital) connector on the video card. 2-2. Connect the DVI Cable to the DVI Port on the back of your Monitor. [ DVI IN ] 2-3. Connected to a Macint
ページ15に含まれる内容の要旨
Connecting a Speaker When connecting a speaker, be careful that the grooves of the monitor and the speaker ( ) are aligned with each other. Adjust the aligned positions until you hear a ‘click’. If a speaker is connected correctly, you can hear a ‘click’.If a speaker is connected without you hearing a ‘click’, the holding part may become damaged. 1. Connect the power line connected to the speaker to the black terminal of the monitor. This speaker is not connected to an ex
ページ16に含まれる内容の要旨
For removal, push and lift up part ( ) towards the inside and remove it. Failing to do so may damage the unit. 6. Connect a headphone to the black terminal at the right of the speaker. Connect a microphone to the red terminal at the right of the speaker. Using the Stand Sliding Stand Stand Stopper Swivel stand
ページ17に含まれる内容の要旨
Using ( ),You can swivel the monitor left and right at an angle of 330 ° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. Tilt angle Using ( ), You can adjust the tilt angle forward and backward for the most comfortable viewing angle. Removing the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove
ページ18に含まれる内容の要旨
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. Monitor A. Mounting interface pad (Sold separately) B. 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it wi
ページ19に含まれる内容の要旨
4. If you can see following message window, then click the "Continue Anyway" button. ® ® Then click the "OK" button. (Microsoft Windows XP/2000 Operating System) This monitor driver is under certifying MS logo,and this installation dosen't damage your system.The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows M
ページ20に含まれる内容の要旨
3. Click " " icon and choose the " " tab then click " " Display Settings Advanced. 4. Click the " " button on the " " tab and select " " tab. Properties Monitor Driver 5. Click "Update Driver." and select "Install from a list or." then click "Next" button. 6. Select "Don't search ,I will" then click "Next" and then click "Have disk".
