ページ1に含まれる内容の要旨
User Manual
ページ2に含まれる内容の要旨
contents Section 1 : Introductions 1 Section 2 : Ports and function introduction 2 Section 3 : Installation Guide 4 Section 4 : OSD Function Operation 5 Section 5 : Monitor Specification 10 Section 6 : Pre-Set Display Mode 11 Section 7 : Troubleshooting 12
ページ3に含まれる内容の要旨
Section 1 : Introductions Product Specification Power Management The computer controls the Power Management Function of the monitor. Please choose the computer which supports this function. Status LED light Screen Power Consumption ON Green Bright Normal Stand by Orange Dark 3w Suspend Orange Dark 3w OFF Mode Yellow Dark 3w
ページ4に含まれる内容の要旨
Section 2 : Ports and function introduction 1. AUTO BUTTON AUTO & Enter. 2. Button For OSD function. 3. Button For OSD function. 4. Menu Button For OSD function. 5. Power Switch. 6. Power Inductor
ページ5に含まれる内容の要旨
7. Audio in. 8. DC Power in. 9. VGA in.
ページ6に含まれる内容の要旨
Section 3 : Installation Guide Check parts before installing Each monitor should enclose the following parts. Any assistance please contact the shop where you bought. 1. Monitor 2. AC/DC Power Adapter 3. AC Power Cable 4. Audio Cable 5. VGA Cable 6. User Manual How to install Power cable? 1. Plug the AC/DC adapter cable connector into the back of Monitor. ( DC-IN input ) 2. Connect the AC power cable and adapter. 3. Connect the VGA Cable to the D-Sub connector in the back of the mo
ページ7に含まれる内容の要旨
Section 4 : OSD Function Operation Key Function instruction AUTO : If the screen image is not in the best status. Press AUTO key for better image or use MENU key to adjust by yourself. MENU : Press MENU button. Then you will see main menu screen. Press again. Then choose the item and adjust by + and . Contrast Adjusts foreground white level of screen image. Brightness Adjusts background black level of screen image. O O Color Adjust Color Temp selection (9300K degree,6500K degr
ページ8に含まれる内容の要旨
MENU : Press MENU button. Then you will see main menu screen. Press again. Then choose the item and adjust by + and . H . Position Adjust Horizontal Position. V . Position Adjust Vertical Position. Sharpness Adjusts background black level of screen image. Phase Adjust DOT CLOCK level of screen image. Clock Adjust DOT CLOCK level of screen image. Exit Exit the current menu page or made.
ページ9に含まれる内容の要旨
MENU : Press MENU button. Then you will see main menu screen. Press again. Then choose the item and adjust by + and . Auto Adjust Auto adjust function. Yes or No. Auto Color Color auto adjust function. Yes or No. Exit Exit the current menu page or made.
ページ10に含まれる内容の要旨
MENU : Press MENU button. Then you will see main menu screen. Press again. Then choose the item and adjust by + and . Language Language selection. OSD H . Position OSD window horizontal position adjustment. OSD V . Position OSD window vertical position adjustment. OSD Timer OSD screen standby time. on or off. Translucent OSD window translucent selection. on or off. Exit Exit the current menu page or made.
ページ11に含まれる内容の要旨
MENU : Press MENU button. Then you will see main menu screen. Press again. Then choose the item and adjust by + and . Signal Source Select signal sources. Mode Select Resolution select. Reset Recall factory setting. Volume Volume adjust. Exit Exit the current menu page or made.
ページ12に含まれる内容の要旨
Section 5 : Monitor Specification
ページ13に含まれる内容の要旨
Section 6 : Pre-Set Display Mode Horizontal Frequency Mode Resolution (KHz) 1 640*350 31.5 KHz / 70.1 Hz 2 720*400 31.5 KHz / 70.1 Hz 3 720*400 37.9 KHz / 85.1 Hz (note2) 4 640*480 31.5 KHz / 60.0 Hz 5 640*480 35.0 KHz / 66.7 Hz (Macintosh) 6 640*480 37.9 KHz / 72.8 Hz 7 640*480 37.5 KHz / 75.0 Hz 8 640*480 43.3 KHz / 85.0 Hz 9 800*600 35.2 KHz / 56.3 Hz 10 800*600 37.8 KHz / 60.3 Hz 11 800*600 48.0 KHz / 72.2 Hz 12 800*600 46.9 KHz / 75.0 Hz 13 800*600 53.7 KHz / 85.1 Hz (note2) 14
ページ14に含まれる内容の要旨
Section 7 : Troubleshooting No Picture 1. Check if the video signal cable is properly connected with the output of the monitor. 2. Check POWER SWITCH. 3. Adjust the brightness and contrast. 4. Check if the LCD monitor is no data status. if it is the LED will appear orange. 5. When signal is from notebook, please check if it changes the signal to external mode. Indistinct Picture 1. Check if the display signal cable is connected correctly. 2. Press Auto-Setup key to improve grapheic quality. G
ページ15に含まれる内容の要旨
whether the display signal cable is properly connected.the loseness of the pin within the plug of cable will lead to connective failure. 2. Connect the monitor to another PC. SYNC. Problem With The Monitor 1. Check if the display input signal is within the specified range (56~75Hz). 2. Connect display signal cable properly. How To Clean The Monitor 1. Shut down the monitor 2. No liquid to be spread directly onto the screen or plastic case. When You Clean The Screen 1. Please use clean, soft, no
ページ16に含まれる内容の要旨
