ページ1に含まれる内容の要旨
SL EL
Jiva SL & Jiva EL
(TP-5700/5800)
SERIES
USER’S MANUAL
WORK STATION
Rev. : Original
ページ2に含まれる内容の要旨
SOME IMPORTANT NOTES FCC NOTES This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipm
ページ3に含まれる内容の要旨
TABLE OF CONTENTS BRIEF INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE USER’S MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 LOCATION FOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 OPERATING SYSTEM RECOVERY . . . . . . . . . . . . . . . . . . . . . 3 - 7 USING THE TOUCH POS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 APPLICATION ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 Ventilation . . . . . . . . . . . .
ページ5に含まれる内容の要旨
BRIEF INTRODUCTION THE USER’S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex fully integrated compact touch interface workstation. Jiva SL & Jiva EL (TP5700/5800) series is a product group of fully integrated PC based Point-Of-Sale systems. However, this manual does not intend to explain any application program that may be supplied with the systems. The user should consult the software supplier or the VAR that he purcha
ページ6に含まれる内容の要旨
STANDARD FEATURES a) CPU: Celeron compatible 400 MHz up b) HDD: available for fat client models c) Support Win98, Win2000 in fat client models, and WinCE, Win XP embedded & Linux environment throughout whole series d) Support thin client architecture either boot from WinCE in CF card or Linux LAN boot e) Fanless design (for thin client models) to reduce dust/grease accumulation f) High quality 12.1” / 15” TFT active matrix LCD panel g) Vertical type LCD panel with easy tilt angle adju
ページ7に含まれる内容の要旨
12. one CR port for control over 2 cash drawers max. 13. audio ports (1 Microphone input and 1 audio line output) n) Touch control functions: left/right button, double click, drag & draw o) High resolution touch sensor: 1024 x 1024 p) Dual display support q) VGA memory size shared from system memory (8 – 64 MB) r) Support high performance DDR266 DRAM with maximum memory size 1GB in two modules s) Integrated structure for optional security devices (incl. 40 keys programmable keypad, sm
ページ8に含まれる内容の要旨
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 4
ページ9に含まれる内容の要旨
PARTS IDENTIFICATION FRONT VIEW Top Mount PD302 on Back Security Devices Upgrade Unit Display Screen + Touch Panel Main Unit Adjustable Stand Assembly The security device and top mount LCD customer display are options to both 12” and 15” models. The LED in the logo area serves for several purposes through giving different indication of steady/flashing green/blue light. Please refer to the paragraph discussing the LED indication in the chapter of “USING THE TOUCH POS” o
ページ10に含まれる内容の要旨
SIDE VIEWS Right Side View Latch Hole For Cable Cover Push In This Direction To Adjust The Tilt Angle Of The Display Panel Lock/Release Lever Left Side View Push Down To Switch The Power ON/OFF Latch Hole For Cable Cover Slide Switch For Power On/Off Control Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 2
ページ11に含まれる内容の要旨
REAR VIEW Lock/Release Button To Detach The Main Unit Optional Security Devices Lock/Release Lever Cable Exit REAR VIEW OF MAIN UNIT Service Window Matching Pegs Cable Exit Cable Cover Removal Hollow Of Cable Cover Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 3
ページ12に含まれる内容の要旨
ADJUSTABLE STAND ASSEMBLY Matching Holes Stand Base Lock/Release Lever BOTTOM OF STAND ASSEMBLY Base UPS Battery Cable Passage Cover Cover Lock/Release Cable Exit Button For Main Unit Stand Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 4
ページ13に含まれる内容の要旨
CONNECTORS Turn Counterclockwise Then Take Out The Latch Key Pull The Cable Cover Out In This Direction Locations of I/O Ports in original revision: CF Card Port PS2 KB LPT Port CDROM Port PS2 Mouse LED Connector COM2 Port Power Input Jack CR Port COM1 Port Audio Out Port LAN Port COM4 Port Audio (Mic) Input Port USB1 Port COM3 Port UPS Battery Connector USB0 Port External VGA Connector CF Card Port is available in thin client models
ページ14に含まれる内容の要旨
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 6
ページ15に含まれる内容の要旨
INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high voltage hazard or electrostatic discharge damage unless the operator is well grounded. Failure to do the above will void the product warranty! SEPARATING MAIN UNIT In order Press the Lock/Release b
ページ16に含まれる内容の要旨
PREPARING STAND ASSEMBLY Take the adjustable stand assembly and turn it up side down to show the bottom of the base. 2 Sets of 4 Matching Holes Screws Cable Passage Adjustable Cover Stand Now, unscrew the 2 screws on the cable passage cover and take the cable Lock/Release passage cover away to show the cable Lever passage. If there is no need to install the optional UPS battery here (either not to be installed or already installed), please skip the next paragraph and start r
ページ17に含まれる内容の要旨
INSTALLING UPS BATTERY UPS Battery Removed Battery Cover Place the optional UPS battery in the battery compartment (shown top left). Screw on the battery cover and route the battery cable through the base. Please enable the UPS features in the software settings before use. ROUTING THE CABLES Place all the cables required for connections to the Jiva SL & Jiva EL (TP5700/5800) series except those for special application purposes into the cable passage. Insert one end of the cable p
ページ18に含まれる内容の要旨
Service 4 Matching Window Pegs Push Open To The Right This battery socket accepts a 3 V button cell Lithium battery (CR2032) required to support the system real time clock. The jumpers in this window are designated for COM port power supply function. Please consult your dealer for technical support on setup of these jumpers. A new Lithium battery can support the system RTC for about 3 years. After the battery is nearly exhausted, the user must change a new battery otherwise the sys
ページ19に含まれる内容の要旨
OPENING CABLE COVER Insert the tip of the latchkey into a latch hole on one side near bottom of the main unit. Turn this key counterclockwise to the end. Do the same on the opposite side. Be sure to take the key out of the hole. Turn Counterclockwise Then Take Out The Latchkey Then push the lock/release lever on the base backward to adjust the stand to the most horizontal position for ease of operation. Open the cable cover by pulling at the removal hollow. Pull The Removal
ページ20に含まれる内容の要旨
both sides to secure the cable cover on the main unit. Adjust the tilt angle of the main unit for best viewing effect in the application. CAUTION: On doing any insertion or extraction of any connector, please always hold the connector head itself instead of pulling on the cable wire. Failure to do this could damage the cable and jack that is considered as an artificial destruction and is not covered by the warranty. WALL MOUNTING The major part in the wall mounting kit is a bracket as s
