ページ1に含まれる内容の要旨
XP17W
ページ2に含まれる内容の要旨
Table of Contents Chapter 1 Introduction......................................................................................................1 1.1 Important Safety Precautions........................................................................................................... 1 1.2 Important Notices............................................................................................................................ 4 1.3 Product Functions.......................................
ページ3に含まれる内容の要旨
ENGLISH Power cord protection—The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter. Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. Entering of objects and liquids—Never insert an object into the product through vents or openings. High volta
ページ4に含まれる内容の要旨
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. “WARNING”-To reduce the risk of fire or electric shock, do n
ページ5に含まれる内容の要旨
ENGLISH 1.2 Important Notices Please use the product under a normal environment 1. Try to avoid the following circumstances. * Heat or direct sunlight places * Unstable or vibrational places * Location with huge magnetic field * Exposure to rain or moisture places 2. For the unauthorized person, please don't serve this product: otherwise the damage caused by unauthorized servicing is not covered by warranty. 3. Unplug this product from AC outlet and remove batteries from IR control, wh
ページ6に含まれる内容の要旨
3. To tear off the label. (See figure 1-4) Figure 1-4 1.7 Viewing Angle Adjustment This product is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +25°. (See Figure 1-5). Figure 1-5 When you want to close the base and body to 90°, you need to release a button from 25°. (See fig. 1-6) Figure 1-6 Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in
ページ7に含まれる内容の要旨
ENGLISH Chapter 2 Installation 2.1 Product Outward 2.1.1 Front view of main body Figure 2-1 Figure 2-2 LED lights Green color --- Power is ON. Indicator for 1 LED lights Orange --- Monitor is in "Power Saving Mode". Power LED is off --- Power is OFF. 2 IR receiver IR receiver. 3 Power Turn on or off the main body. Open the OSD menu. 4 Menu Select the next lower channel / higher channel (TV/AV mode) ; OSD 5 Channel function for selecting (PC mode). Lower / Raise t
ページ8に含まれる内容の要旨
2.2 System Installation: Please refer to the example closest to your configuration Please turn off the power of all devices before connection. For audio connection, please use RCA audio (L+R) connector. For video connection, please choose either RCA video connector or s-video connector. Moreover, for connection to monitor alone please omit those connections associated with PC. 7 ENGLISH
ページ9に含まれる内容の要旨
ENGLISH Chapter 3 Operation Instruction 3.1 IR Control 4:3 / 16:9 POWER Switch between power-on and Select the screen scale. power-off. MUTE OK Turn the sound on/off. Enter. MPX Select the sound output Adjust the selected item on menu or adjust the volume. VOLUME Adjust the volume. * Press to select desired item on the menu * Press to select desired page on the text mode CHANNEL DISPLAY Select channels up or down. Show the information on screen. TV/AV1/AV2/PC 0~9 Numbe
ページ10に含まれる内容の要旨
3.2 Advanced Setting 3.2.1 TV settings The OSD shown below displays when you press "MENU" (on main body) or " " (on remote control) button. You can see four options shown as below. PICTURE: CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, HUE . AUDIO: VOLUME, MUTE, BALANCE, TREBLE, BASS. RESET: LANGUAGE, RECALL. SETUP: MTS, AIR/CATV, CHANNEL, CH. Memory, AUTO SEARCH. CLOSED CAPTION: CLOSED CAPTION MODE PROTECTION: LOCK TV RATING MPAA RATING CHANGE PIN MAIN MENU PICTURE Press "MENU" (
ページ11に含まれる内容の要旨
ENGLISH PICTURE CONTRAST Press " " (on main body) or " ←, →" (on remote control) button to increase or decrease the screen display. BRIGHTNESS Press " " (on main body) or " ←, →" (on remote control) button to increase or decrease the screen brightness. COLOR Press " " (on main body) or " ←, →" (on remote control) button to adjust the contrast for soft or saturation. SHARPNESS Press " " (on main body) or " ←, →" (on remote control) button to adjust the contrast for sof
ページ12に含まれる内容の要旨
RESET LANGUAGE Press " " (on main body) or " ←, →" (on remote control) button to select the LANGUAGE. RECALL Press " " (on main body) or " ←, →" (on remote control) button to RECALL, the recall function will return all adjusted parameters to factory preset values. SETUP MTS Press " " (on main body) or " ←, →" (on remote control) button to select the AUDIO SYSTEM. AIR/CATV Press " " (on main body) or " ←, →" (on remote control) button to select the AIR or CATV SYSTEM. CH
ページ13に含まれる内容の要旨
ENGLISH CLOSED CAPTION CLOSED CAPTION 1.Press " " (on main body) or " ←, →" (on remote control) button to select the CLOSED CAPTION NO or YES. 2. Press " " (on main body) or " ←, →" (on remote control) button to select the MODE for CC SYSTEM. PROTECTION PROTECTION 1. Press " " (on main body) or " ←, →" (on remote control) button to select the lock and TV ration and MPAA ration for OFF or ON. 2. Press remote control select the CHANGE PIN for modify four PIN numbe
ページ14に含まれる内容の要旨
RESET Press "MENU" (on main body)select " ↑, ↓" (on remote control) button to RESET then press OK to enter. PICTURE CONTRAST Press " " (on main body) or " ←, →" (on remote control) button to increase or decrease the screen display. BRIGHTNESS Press " " (on main body) or " ←, →" (on remote control) button to increase or decrease the screen brightness. COLOR Press " " (on main body) or " ←, →" (on remote control) button to adjust the contrast for soft or saturatio
ページ15に含まれる内容の要旨
ENGLISH BASS Press " " (on main body) or " ←, →" (on remote control) button to adjust lower or raise the bass RESET LANGUAGE Press " " (on main body) or " ←, →" (on remote control) button to select the LANGUAGE. RECALL Press " " (on main body) or " ←, →" (on remote control) button to RECALL, the recall function will return all adjusted parameters to factory preset values. 3.2.3 PC settings The OSD shown below displays when you press "MENU"(on main body and remote control
ページ16に含まれる内容の要旨
3.2.4 PC OSD function description Icon Function Function Description BRIGHTNESS This function increases or decreases the brightness of the image. This function increases or decreases the difference between the dark and light CONTRAST color. This function shifts the entire display image left or right. H-POSITION This function shifts the entire display image up or down. V-POSITION AUTO This function will adjust the display size automatically to fit full screen. ADJUSTMENT
ページ17に含まれる内容の要旨
ENGLISH Chapter 4 Technical Information 4.1 Specifications LCD Panel Size 17" (43 cm) Display Type Active matrix color TFT LCD Resolution 1280 x 768 Display Dot 1280 x (RGB) x 768 Display Area (mm) 369.6 x 221.7 (H x V) Display Color 16.2M 2 Brightness 450 cd/m (typical) Contrast Ratio 600:1 (typical) Response Time Ta=25°C T on=15ms T off=10ms Lamp Voltage 630 Vrms (typical) Lamp Current 10.5 mA rms. (typical) Viewing Angle Vertical: -85° ~ +85° Horizontal: -85° ~ +85° 16.
ページ18に含まれる内容の要旨
Sync Input Signal Separate TTL compatible horizontal and vertical synchronization Polarity Positive and negative Supports VESA DDC1 and DDC2B functions Plug & Play External Connection Power Input (AC input) AC socket Video Cable 1.5M with 15-pin D-sub connector Audio Cable 1.5M with Stereo Jack Environment Operating Condition: Temperature 5°C to 35°C/41°F to 95°F Relative Humidity 20% to 85% Storage Condition: Temperature -20°C to 60° C/-4°F to140° F Relative Humidity 5% t
ページ19に含まれる内容の要旨
ENGLISH 4.2 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Nominal Sync Nominal Sync Nominal Frequency Polarity Freq. Polarity Pixel Mode Resolution Total (KHz) (Hz) Clock Horizontal Vertical (MHz) VESA MODES 640x480@60Hz 800 x 525 31.469 N 59.940 N 25.175 VGA 640x480@72Hz 832 x 520 37.861 N 72.809 N 31.500 640x480@75Hz 840 x 500 37.500 N 75.00 N 31.500 800x600@56Hz 1024 x 625 35.156 N/P 56
ページ20に含まれる内容の要旨
Chapter 6 Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor. PROBLEM Picture is unclear and unstable The pictur
