ページ1に含まれる内容の要旨
Philips 200P3M/200P3G Electronic User's Manual
file:///D|/K1/english/200p3mg/index.htm [1/3/2003 3:34:16 PM]
ページ2に含まれる内容の要旨
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor:
ページ3に含まれる内容の要旨
Safety & Troubleshooting ● Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold. ● Avoid moving the LCD monitor between locations with large temperature differences. Choose a site that falls within the following temperature and humidity ranges. ❍ Temperature: 5-35°C 41-95°F ❍ Humidity: 20-80% RH ● Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD monitor inside a car boot. ● Take care not to
ページ4に含まれる内容の要旨
About This Electronic User's Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version. It includes the following sections: ● Safety and Troubleshooting Information provides tips and solutions for common problems as well as o
ページ5に含まれる内容の要旨
About This Electronic User's Manual CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority. RETURN TO TOP OF THE PAGE ©2002 Koninklijke Phil
ページ6に含まれる内容の要旨
200P3M/200P3G Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features BRILLIANCE 200P3M/200P3G ● 20-inch color LCD monitor with excellent display performance ● Multiple video input allowing displaying of DVI-I digital/ analog, VGA analog, S-Video & CVBS Video inputs. ● Picture-in-Picture
ページ7に含まれる内容の要旨
200P3M/200P3G Product Information VIDEO • Video dot rate 202 MHz • Input impedance - Video 75 ohm - Sync 2K ohm • Input signal levels 0.7 Vpp Separate sync • Sync input signal Composite sync Sync on green • Sync polarities Positive and negative • S-Video Y input 1.0Vpp, C input 0.3Vpp, 75ohm input impedance • CVBS Composite, 1.0Vpp, 75ohm input impedance Triple input(two connectors): D-Sub(analog) and DVI-I(accepts •Video interface both digital and analog) are available and user s
ページ8に含まれる内容の要旨
200P3M/200P3G Product Information Upper >85° (typ.) • Viewing Angle: Lower >85° (typ.) Left >85° (typ.) (C/R>10) Right >85° (typ.) • Response time <30ms (typ.) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes 1600 x 1200 at 75Hz(analog input) • Maximum 1600 x 1200 at 60Hz(digtal input) • Recommended 1600 x 1200 at 60Hz 50 user definable modes 18 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.5 640*350 70 (IBM VGA 10h) 31.5 720
ページ9に含まれる内容の要旨
200P3M/200P3G Product Information 91.1 1280*1024 85 75.0 1600*1200 60 93.8 1600*1200 75 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving
ページ10に含まれる内容の要旨
200P3M/200P3G Product Information 5° C to 35° C (operating) • Temperature -20° C to 60° C (storage) • Relative humidity 20% to 80% • System MTBF 50K hrs (including CCFL 40K hrs) 200P3M: Light Gray • Cabinet color 200P3G: Black * This data is subject to change without notice. * Resolution 1600x1200, standard size, contrast max., brightness 50%, 9300° K, full white pattern, without audio/USB. RETURN TO TOP OF THE PAGE Pin Assignment 1. The digital/analog DVI-I onnector contains 29 signal contact
ページ11に含まれる内容の要旨
200P3M/200P3G Product Information 2. The 15-pin D-sub connector (male) of the signal cable: Pin Pin Assignment Assignment No. No. 1 Red video input 9 +5V 2 Green video input/SOG 10 Logic ground Identical output - connected 3 Blue video input 11 to pin 10 4 Sense (GND) 12 Serial data line (SDA) 5 Not connected 13 H. Sync / H+V 6 Red video ground 14 V. Sync (VCLK for DDC) 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the li
ページ12に含まれる内容の要旨
200P3M/200P3G Product Information 1) Tilt 2) Swivel RETURN TO TOP OF THE PAGE file:///D|/K1/english/200p3mg/product/product.htm (7 of 7) [1/3/2003 3:34:27 PM]
ページ13に含まれる内容の要旨
Installing your LCD Monitor Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Setting up and connecting your monitor • VESA Standard Mounting • Getting Started • Optimizing Performance Front View Product Description To switch monitor's power On and Off Power LED To access OSD menu To adjust the OSD To adjust brightness of the display To adjust the OSD To adjust speakers volume Automatically adjust the horizontal position, vertical position, phase and clock setting
ページ14に含まれる内容の要旨
Installing your LCD Monitor 1 CVBS video input 2 S-Video video input 3 VGA input 4 DVI-I input 5 AC power in 6 Mic out 7 Audio in 8 Audio L input 9 Audio R input RETURN TO TOP OF THE PAGE Optimizing Performance ● For best performance, ensure that your display settings are set at 1600x1200@60Hz file:///D|/K1/english/200p3mg/install/install.htm (2 of 3) [1/3/2003 3:34:30 PM]
ページ15に含まれる内容の要旨
Installing your LCD Monitor Note: You can check the current display settings by pressing the "OK" button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. ● You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This included on this CD. Step-by-step instructions are provided to guide you through the installtion process. Click on the link to know more about this progra
ページ16に含まれる内容の要旨
On-Screen Display On-Screen Display Description of the On-Screen Display • The OSD Tree Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance of the monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when the user is operating the monitor. Basic and simple instruction on the control keys. When you press the button
ページ17に含まれる内容の要旨
On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. file:///D|/K1/english/200p3mg/osd/osddesc.htm (2 of 7) [1/3/2003 3:34:34 PM]
ページ18に含まれる内容の要旨
On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (3 of 7) [1/3/2003 3:34:34 PM]
ページ19に含まれる内容の要旨
On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (4 of 7) [1/3/2003 3:34:34 PM]
ページ20に含まれる内容の要旨
On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (5 of 7) [1/3/2003 3:34:34 PM]
