ページ1に含まれる内容の要旨
Philips LCD Monitor Electronic User’s Manual
ページ2に含まれる内容の要旨
• Safety Precautions and Safety and Troubleshooting Information Maintenance • FAQs • Troubleshooting Safety precautions and maintenance • Regulatory Information • Other Related Information WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Operation: Keep the m
ページ3に含まれる内容の要旨
extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. ❍ Temperature: 0-40°C 32-104°F ❍ Humidity: 20-80% RH Service: The casing cover should be opened only by qualified service personnel. If there is any need for any document for repair or integration, please contact with your local service center. (please refer to the chapter of "Consum
ページ4に含まれる内容の要旨
• Safety and Troubleshooting FAQs (Frequently Asked Questions) • General FAQs • Screen Adjustments General FAQs • Compatibility with Other Peripherals Q: When I install my monitor what should I do if the screen shows 'Cannot display this video • LCD Panel Technology mode'? • Ergonomics, Ecology and A: Recommended video mode for Philips 22": 1680 x 1050 @60Hz. Safety Standards • Troubleshooting Unplug all cables, then connect your PC to the monitor that you used • Regulato
ページ5に含まれる内容の要旨
Q: How do I adjust the resolution? A: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q: What if I get lost when I am making monitor adjustments? A: Simply press the MENU button, then select 'Reset' to recall all of the original factory settings. Q: What is the Auto function? A: The AUTO adjustment key restores the optimal screen position, phase and clock
ページ6に含まれる内容の要旨
uses an active element (TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology. Q: Will the LCD screen be resistant to scratches? A: A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panel surface is not subject to any excessive shocks or scratches. Q: How should I clean the LCD surface? A: For nor
ページ7に含まれる内容の要旨
Q: Can the Philips LCD Monitor be mounted on the wall? A: Yes. Philips LCD monitors have this optional feature. For standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories. We recommend to contact your Philips sales representative for more information. RETURN TO TOP OF THE PAGE Screen Adjustments Q: How do LCDs compare to CRTs in terms of radiation? A: Because LCDs do not use an electron gun, they do n
ページ8に含まれる内容の要旨
portable game consoles, etc. LCD is the technology used for displays in notebooks and other small computers. Like light-emitting diode and gas-plasma technologies, LCD allows displays to be much thinner than cathode ray tube (CRT) technology. LCD consumes much less power than LED and gas-displays because it works on the principle of blocking light rather than emitting it. Q: What differentiates passive matrix LCDs from active matrix LCDs? A: An LCD is made with either a passive matrix or
ページ9に含まれる内容の要旨
using the dual-refraction of a liquid crystal. Using the property that the projection of inlet light refracts toward the major axis of the liquid element, it controls the direction of inlet light and displays it. Since the refraction ratio of inlet light on liquid crystal varies with the inlet angle of the light, the viewing angle of a TFT is much narrower than that of a CDT. Usually, the viewing angle refers to the point where the contrast ration is 10. Many ways to widen the viewing angl
ページ10に含まれる内容の要旨
Q: Does the LCD monitor conform to general safety standards? A: Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 99/03 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability. The specification page provides detailed data on safety standards. More information is provided in the Regulatory Information section. RETURN TO TOP OF THE PAGE
ページ11に含まれる内容の要旨
Troubleshooting • Safety and Troubleshooting • FAQs This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these • Common Problems solutions, contact Philips customer service representative. • Imaging Problems Common Problems • Regulatory Information • Other Related Information Having this problem Check these items Make sure the power cord is plugged into the power outlet and into the back of the monitor. No Pict
ページ12に含まれる内容の要旨
Vertical flicker appears Press the Auto button. Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls. Horizontal flicker appears Press the Auto button. Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls. Adjust the contrast and brightness on On-Screen Display. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact The screen is too bri
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
• Regulatory Information Recycling Information for Customers Waste Electrical and Electronic • Equipment-WEEE Model ID: 220VW9 • CE Declaration of Conformity Model No: HWV9220T • Energy Star Declaration • Federal Communications Recycling Information for Customers Commission (FCC) Notice (U.S. Only) Philips establishes technically and economically viable objectives to optimize the environmental • FCC Declaration of Conformity performance of the organization's product, service a
ページ15に含まれる内容の要旨
Waste Electrical and Electronic Equipment-WEEE Attention users in European Union private households This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such
ページ16に含まれる内容の要旨
VESA State LED Indicator Power Consumption Normal operation ON (Active) Green < 49W (typ.) Power Saving Alternative 2 OFF (Sleep) Amber < 2 W One step Switch Off Off < 1 W ® As an ENERGY STAR Partner, PHILIPS has determined that this product meets ® the ENERGY STAR guidelines for energy efficiency. We recommend you switch off the monitor when it is not in use for a long time. RETURN TO TOP OF THE PAGE Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested
ページ17に含まれる内容の要旨
RETURN TO TOP OF THE PAGE FCC Declaration of Conformity Trade Name: Philips Philips Consumer Electronics North America P.O. Box 671539 Responsible Party: Marietta , GA 30006-0026 1-888-PHILIPS (744-5477) Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interf
ページ18に含まれる内容の要旨
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. RETURN TO TOP OF THE PAGE EN 55022 Compliance (Czech Republic Only) RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The
ページ19に含まれる内容の要旨
RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
ページ20に含まれる内容の要旨
Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETURN TO TOP OF THE PAGE Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme
