ページ1に含まれる内容の要旨
Philips 180P2M/180P2G Electronic User's Manual
file:///D|/K1/english/180p2m/index.htm [3/26/2003 11:00:02 AM]
ページ2に含まれる内容の要旨
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monito
ページ3に含まれる内容の要旨
Safety & Troubleshooting Installation Locations ● Avoid Heat and Extreme Cold ● Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold. ● Avoid moving the LCD monitor between locations with large temperature differences. Choose a site falling within the following temperature and humidity ranges. ❍ Temperature: 5-35°C 41-95°F ❍ Humidity: 20-80% RH ● Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place th
ページ4に含まれる内容の要旨
About This Electronic User's Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version. It includes the following sections: ● Safety and Troubleshooting Information provides tips and solutions for common problems as well as o
ページ5に含まれる内容の要旨
About This Electronic User's Manual CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority. RETURN TO TOP OF THE PAGE ©2002 Koninklijke Phil
ページ6に含まれる内容の要旨
180P2M/180P2G Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features BRILLIANCE 180P2M/180P2G ● 18-inch color LCD monitor with excellent display performance ● Thinnest front bezel design ● Triple input featuring two connectors - accepts DVI-I digital/analog and VGA analog inputs ● Emb
ページ7に含まれる内容の要旨
180P2M/180P2G Product Information Horizontal Frequency 30kHz-82kHz VIDEO • Video dot rate 135MHz • Input impedance - Video 75 ohm - Sync 2K ohm • Input signal levels 0.7 Vpp Separate sync • Sync input signal Composite sync Sync on green • Sync polarities Positive and negative Triple input (two connectors): D-Sub (analog) and DVI-I (accepts • Video interface both digital and analog) are available and user selectable AUDIO • Input signal level 0.7 Vpp • Headphone out signal
ページ8に含まれる内容の要旨
180P2M/180P2G Product Information Upper >85° (typ.) • Viewing Angle: Lower >85° (typ.) Left >85° (typ.) (C/R>10) Right >85° (typ.) • Response time <30ms (typ.) * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1280 x 1024 at 75Hz • Recommended 1280 x 1024 at 60Hz 32 user definable modes 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.5 640*350 70 (IBM VGA 10h) 31.5 720*400 70 31.5 640*480 60 35.0 640*480 67
ページ9に含まれる内容の要旨
180P2M/180P2G Product Information RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving features: Power Management Definition VESA Mode
ページ10に含まれる内容の要旨
180P2M/180P2G Product Information • Relative humidity 20% to 80% • System MTBF 50K hrs (including CCFL 50K hrs) 180P2M: Light Gray • Cabinet color 180P2G: Black * These information are subject to change without notice. * Resolution 1280x1024, standard size, contrast max., brightness 50%, 9300° K, full white pattern, without audio/USB. RETURN TO TOP OF THE PAGE Pin Assignment 1. The digital/analog DVI-I onnector contains 29 signal contacts organized in three rows of eight contacts. Signal pin a
ページ11に含まれる内容の要旨
180P2M/180P2G Product Information 2. The 15-pin D-sub connector (male) of the signal cable: Pin Pin Assignment Assignment No. No. 1 Red video input 9 +5V 2 Green video input/SOG 10 Logic ground Identical output - connected 3 Blue video input 11 to pin 10 4 Sense (GND) 12 Serial data line (SDA) 5 Not connected 13 H. Sync / H+V 6 Red video ground 14 V. Sync (VCLK for DDC) 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the li
ページ12に含まれる内容の要旨
180P2M/180P2G Product Information 1) Tilt 2) Swivel 3) Height adjustment 4) Portrait display Turn monitor from landscape view to portrait view file:///D|/K1/english/180p2m/product/product.htm (7 of 9) [3/26/2003 11:00:08 AM]
ページ13に含まれる内容の要旨
180P2M/180P2G Product Information 4.1) Tilt the monitor body at an angle 4.2) Rotate the monitor body 90 degrees counter clockwise. file:///D|/K1/english/180p2m/product/product.htm (8 of 9) [3/26/2003 11:00:08 AM]
ページ14に含まれる内容の要旨
180P2M/180P2G Product Information RETURN TO TOP OF THE PAGE file:///D|/K1/english/180p2m/product/product.htm (9 of 9) [3/26/2003 11:00:08 AM]
ページ15に含まれる内容の要旨
Installing your LCD Monitor Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Connecting to Your PC • Remove and re-install the base • Getting Started • Optimizing Performance • Accessories (optional) Front View Product Description UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are press
ページ16に含まれる内容の要旨
Installing your LCD Monitor Signal inputs selective hotkeys. Allows user to switch between two video connectors (D-Sub & DVI-I), e.g. D-Sub <-> DVI-D digital inputs or D-Sub <-> DVI-A analog inputs. 1. Audio power on/off and volulme adjustment 2. Audio power LED 3. BASS on/off 4. Built-in Mic 5. Mute on/off RETURN TO TOP OF THE PAGE Side View file:///D|/K1/english/180p2m/install/install.htm (2 of 6) [3/26/2003 11:00:12 AM]
ページ17に含まれる内容の要旨
Installing your LCD Monitor 1. Headphone Jack 2. Microphone Jack RETURN TO TOP OF THE PAGE Rear View file:///D|/K1/english/180p2m/install/install.htm (3 of 6) [3/26/2003 11:00:12 AM]
ページ18に含まれる内容の要旨
Installing your LCD Monitor 1. Audio in 2. Mic out 3. DC 12V in file:///D|/K1/english/180p2m/install/install.htm (4 of 6) [3/26/2003 11:00:12 AM]
ページ19に含まれる内容の要旨
Installing your LCD Monitor 1. AC power in 2. DC 12V out for Philips Multimedia Base only 3. DVI-I Connector 4. D-SUB Connector RETURN TO TOP OF THE PAGE Optimizing Performance ● For best performance, ensure that your display settings are set at 1024x768@60Hz (for 14"/15") or 1280x1024, 60Hz (for 17"/18"). Note: You can check the current display settings by pressing the "OK" button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. ●
ページ20に含まれる内容の要旨
Installing your LCD Monitor RETURN TO TOP OF THE PAGE file:///D|/K1/english/180p2m/install/install.htm (6 of 6) [3/26/2003 11:00:12 AM]
