ページ1に含まれる内容の要旨
Operating
Instructions
Multi-Format Monitor
Model BT-H1700BP
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF
MUTING POWER
SLOT 1 SLOT 2 SLOT 3
A B C D E F
VOLUME MENU BLUE ASPECT AREA INPUT SELECT
CHECK MARKER
Before attempting to connect, operate or adjust this product, please read these instructions
completely.
Printed in Japan LCT1464-001B
P
VQT0G67-1 1003-MK-MW-VP
cover_LCT1464-001A 1 03.10.10, 13:26
ページ2に含まれる内容の要旨
SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. WARNINGS FCC INFORMATION (U.S.A. only) CAUTION: Changes or modification not approved by To prevent fire or shock hazard, do not expose this PANASONIC could void the user’s authority to operate monitor to rain or moisture. Dangerous high voltages are the equipment. present inside the unit. Do not remove the back cover of the cabinet. When s
ページ3に含まれる内容の要旨
CONTENTS SAFETY PRECAUTIONS ........................................................................... 2 CONTROLS AND FEATURES.................................................................... 4 CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) ..................................................................... 7 PREPARATION ........................................................................................... 9 BASIC MENU OPERATIONS (MAIN MENU, SET-UP MENU) ................................
ページ4に含まれる内容の要旨
CONTROLS AND FEATURES FRONT VIEW 2 3 4 5 7 8 11 12 13 14 18 19 20 1 UNDER PULSE COLOR MUTING DEGAUSS SCAN CROSS OFF POWER SLOT 1 SLOT 2 SLOT 3 A B C D E F MENU SCREENS ASPECT AREA INPUT SELECT VOLUME CHECK MARKER UNDER PULSE COLOR DEGAUSS SCAN CROSS OFF SLOT 1 SLOT 2 SLOT 3 POWER A B C D E F VOLUME MENU CHECK BLUE ASPECT MARKER AREA INPUT SELECT 6 9 6 10 15 16 17 8 1 Tally lamp EMBEDDED AUDIO channel switch button Lights when the tally control signal is ON. Press this button while
ページ5に含まれる内容の要旨
14 COLOR OFF button/lamp 18 INPUT SELECT button/lamp When you press the COLOR OFF button, the Selects an input signal from one of the input button lights and the screen becomes cards installed in the monitor’s card slots monochrome. Only the brightness signal is (SLOT1 – SLOT3). Select SLOT1: press A or B displayed. Select SLOT2: press C or D • When the COLOR OFF button is pressed while lit, the Select SLOT3: press E or F light goes off and the normal screen is restored. • Use this function to c
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) 7 VIDEO INPUT CARD (BT-YA701P) 1 Composite signal input/output terminals (VIDEO 1, VIDEO 2) Input (IN) and output (OUT) terminals for the composite video signals of VIDEO 1 the NTSC, PAL, and black/white (50 Hz/60 Hz). IN OUT NTSC and PAL are switched in the “COLOR SYSTEM”. Refer to “COLOR VIDEO 2 1 SYSTEM” on page 17. Select VIDEO 1: press INPUT SELECT A (SLOT1)/C (SLOT2)/E (SLOT3) buttons. IN OUT Select VIDEO 2: press INPUT SELECT B (SLOT1)/D (SLOT2
ページ8に含まれる内容の要旨
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) (cont’d) 7 SDI INPUT CARD (BT-YA703P) 1 SWITCHED OUT terminal Output (OUT) terminal for the re-clocked signal. The input signal from SDI 1 or SDI 2 (selected with the INPUT SELECT buttons) is re-clocked SWITCHED OUT and output from this terminal. 1 NOTES: • Even when the input signal is switched from the SDI Input Card, the SWITCHED OUT terminal still outputs the SDI 1 or SDI 2 re-clocked signal (whichever you IN SDI 1 selected last). 2 • No signal is
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
BASIC MENU OPERATIONS (MAIN MENU, SET-UP MENU) ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SET-UP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SET-UP MENU contains the settings required for initial setup. “MAIN MENU” Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input car
ページ12に含まれる内容の要旨
BASIC MENU OPERATIONS (MAIN MENU, SET-UP MENU) (cont’d) 7 DISPLAYING THE MENU 7 About “ sub menu” Only displays selected items. (sub-menu display) Allows SCREENS you to adjust and set items while looking at the actual ¶ To display MAIN MENU screen. Press the MENU button on the front panel. NOTE: ¶ To display SET-UP MENU This function is available only when “ sub menu” is displayed in the Press the button while pressing the button on the front panel. MENU. NOTES: • To exit the MENU, press the M
ページ13に含まれる内容の要旨
HOW TO USE “MAIN MENU” 7 “MAIN MENU” SCREENS MAIN MENU Setting Items Press . APERTURE CONTROL LEVEL : 00 SLOT CONDITION CONTROL FREQ. :HIGH sub menu POSI. :LOWER sub menu See page 14. AREA MARKER. reset COLOR MATRIX EXIT: MENU ENTER: + SELECT: EXIT: MENU ADJUST: –+ SELECT: Some items are not displayed depending on the picture input signal. ( See page 11.) INPUT A : VIDEO-1 INPUT B : VIDEO-2 INPUT C : COMPO. INPUT
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
HOW TO USE “SET-UP MENU” 7 “SET-UP MENU” SCREENS SET-UP MENU Setting Items Press . FUNCTION SETTING COLOR SYSTEM : AUTO SYNC SELECT : INT. PICTURE SUB ADJ. RUSH DELAY TIME : STD. COLOR TEMP./BAL. SIZE/POSI. ADJ. TALLY SELECT : GREEN REMOTE SYSTEM : MAKE DISTORTION ADJ. STATUS DISPLAY E.AUDIO GROUP : 1G HOUR METER X100h : 000 CONTROL LOCK : OFF all reset EXIT: MENU ADJUST: – + SELECT: EXIT: MENU ENTER: + SELECT:
ページ17に含まれる内容の要旨
7 ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS FUNCTION SETTING 7 TALLY SELECT Selects the color of the tally lamp (when lit) on the Selects the control systems for the COLOR SYSTEM, upper front panel. synchronized signal, RUSH DELAY TIME, tally lamp GREEN : The tally lamp lights in green. colors, and MAKE/TRIGGER terminal. RED : The tally lamp lights in red. • Checks the amount of time that the monitor has been used. • Selects the audio channel group for the EMBEDDED 7 REMOTE SYSTEM AUDIO. (When
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
SIZE/POSI. ADJ. DISTORTION ADJ. Adjusts the size or position of the picture. Compensates the picture distortion. Press the button to Press the button to display the setting menu display the setting menu H.SIZE : 00 PINCUSHION : 00 H.POSITION : 00 PIN.BALANCE : 00 illustrated on the right. illustrated on the right. V.SIZE : 00 PARALLELOGRAM : 00 V.POSITION : 00 TRAPEZOID : 00 ZOOM H.SIZE : 00 ROTATION : 00 ZOOM V.SIZE : 00 sub menu sub menu re
ページ20に含まれる内容の要旨
HOW TO USE “SET-UP MENU” (cont’d) STATUS DISPLAY CONTROL LOCK Sets the status display ON/OFF. 7 CONTROL LOCK * Switches the display on and off. Also selects the type of Invalidates most of operations on the front panel display. (including menu screen operations). Press the button to OFF : Enables normal operations. display the setting menu ON : Invalidates all operations except the power switch and STATUS DISPLAY : ON illustrated on the right. CONTROL LOCK. NOTE: While CONTRO
