ページ1に含まれる内容の要旨
USER'S MANUAL
®
MultiSync
™
FP955
To learn about other special offers, register online at www.necmitsubishi.com/ productregistration
FP955.wpc 1 1/23/01, 12:13 PM
ページ2に含まれる内容の要旨
Index Warning.................................................................................................. 1 Contents ............................................................................................... 2 Quick Start ...........................................................................................3 Controls ................................................................................................ 5 Recommended Use ..................................................
ページ3に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
ページ4に含まれる内容の要旨
Contents ® TM Your new NEC MultiSync FP955 monitor box* should contain the following: • MultiSync FP955 with USB base • Power Cord • Video Signal Cable • USB Cable • User’s Manual Power Cord USB Cable USER'S MANUAL ® MultiSync ™ FP955 To learn about other special offers, register online at www.necmitsubishi.com/ productregistration Video Signal Cable User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. 2 FP955.wpc 4 1/23/01, 12:13 PM
ページ5に含まれる内容の要旨
Quick Start ® ™ To attach the MultiSync FP955 monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync FP955 Macintosh cable adapter (not included) to the monitor c
ページ6に含まれる内容の要旨
Quick Start –continued 5. Remove the AC Power cord from the monitor. Connect the USB hub base power cord to the monitor (Figure B.1) then connect the monitor’s power cord, to the other USB hub base power cord (Figure B.1). 6. Connect the other end of the monitor’s power cord into the AC wall outlet (Figure C.1). 7. Connect the usb cable to the the usb output port of your computer system, and to the USB Input Jack port on the back of the USB Hub Base. 8. Turn on the monitor (Figure D.1). 9. Turn
ページ7に含まれる内容の要旨
Controls OSM™ (On-Screen Manager) control buttons on the front of the monitor function as follows: To change DVI/D-SUB signal input, press the RESET button. NOTE: OSM must be closed in order to change the DVI/D-SUB signal input. Main Menu Sub-Menu EXIT Exits the OSM menu. Exits to the OSM controls main menu. CONTROL Moves the highlighted Moves the highlighted area / area up/down to select up/down to select one of the one of the controls. controls. CONTROL Moves the highlighted Moves the bar i
ページ8に含まれる内容の要旨
Controls –continued ® Color Control/AccuColor Control System Color presets 1 through 5 selects the desired color setting. The bar is replaced by the color setting choice from 1 to 5. Each color setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom. Red, Green, Blue: AccuColor Control System decreases or increases the monitor’s red, green or blue color guns depending upon which is selected. The change in co
ページ9に含まれる内容の要旨
Controls –continued ® GlobalSync Control: Eliminates picture impurities that may result from the earth’s magnetic field. While in the sub-menus (GlobalSync, Top Left, Top Right, Bottom Left or Bottom Right), use the –/+ control buttons to fine tune the GlobalSync corrections. Note: NEC recommends that you perform GlobalSync correction while running a typical application such as a spreadsheet or text document. ™ Factory Preset: Selecting Factory Preset allows you a reset most OSM control settings
ページ10に含まれる内容の要旨
Controls –continued USB Base USB Input Jack: This connection provides bi-directional communication with the host computer using the USB cable provided with the USB Hub base. USB Output Jack: Can be connected to virtually any USB device using a stan- dard USB cable terminated with a Series A plug. Includes both high and low speed and high low power USB devices. NOTE: All four USB output jacks are identical and may be used interchangeably. 8 FP955.wpc 10 1/23/01, 12:13 PM
ページ11に含まれる内容の要旨
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® TM THE MULTISYNC FP955 COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the
ページ12に含まれる内容の要旨
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 24 inches. • Rest your eyes period
ページ13に含まれる内容の要旨
Specifications ® ™ Monitor MultiSync FP955 Notes Specifications Monitor Picture Tube Diagonal: 50 cm/19 inch 90° deflection, 0.24 grille pitch, Viewable Image Size: 458 mm/18 inch medium short persistence phosphor, Radius: 50,000 mm aperture grille CRT, multi-layered, anti-static screen coating, semi-dark-tint ® screen, and OptiClear screen surface. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Compo
ページ14に含まれる内容の要旨
Specifications –continued USB Hub Specifications USB Input Jack One Series B (rear mounted) USB Input Type High Speed or Low Speed USB Output Jacks Four Series A (right side-mounted) USB Output Type High Speed or Low Speed High Power or Low Power USB Output Current Maximum per jack - 500mA Power Requirements AC 100-240 V, 50/60 Hz Current Rating 3.3A (USB Hub 0.3A, AC OUT 3A) Dimensions 10.2 in (W) x 1.8 in (H) x 9.5 in (D) 260mm (W) x 46mm (H) x 243mm (D) Weight 1.79 lbs / 0.81kg Environmental
ページ15に含まれる内容の要旨
Features Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is what you get on your printed output. The striped phosphor alignment of the CRT delivers superior vertical definition with improved brightness for more uniform image contrast. ® OptiClear Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Alon
ページ16に含まれる内容の要旨
Monitor Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin ass
ページ17に含まれる内容の要旨
USB Hub Base Troubleshooting USB devices plugged into the USB Hub Base do not work • Make sure all connecting plugs between the USB Hub Base and computer fully seated. Make sure the wall power outlet or power strip switches on the power strip are turned on. • Make sure both ends of the USB cable are fully seated in the computer and USB Hub base. • USB devices connected to the Base must be plugged into the output ports. These ports are found on the right side of the Base. NOTE: Do not plug a USB
ページ18に含まれる内容の要旨
References • BBS (978) 742-8706 NEC-Mitsubishi Electronics Display of America Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communica- tion parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: Internet e-mail: tech-support@necmitsubishi.com Internet ftp site: ftp.necmitsubishi.com World Wide Web: http://www.necmits
ページ19に含まれる内容の要旨
Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and wil
ページ20に含まれる内容の要旨
TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product devel- oped for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encourag- ing the adaptation of goods and
