ページ1に含まれる内容の要旨
NEC Flat Professional Series
®
®
MultiSync
MultiSync
™
™
FP1350X
FP1350X
7A811011.WPC 1 5/18/00, 12:26 PM
Register your
product online at
www.nectech.com/
productregistration
ページ2に含まれる内容の要旨
Index Warning ..............................................................................1 Contents ..............................................................................2 Quick Start........................................................................3-5 Controls ..........................................................................6-10 Recommended Use ........................................................11-12 Specifications .................................................
ページ3に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULL
ページ4に含まれる内容の要旨
Contents You can register your product online at www.nectech.com/productregistration ® ™ Your new NEC Technologies MultiSync FP1350X monitor box* should contain the following: • MultiSync FP1350X (JC-22W72) Monitor with tilt/swivel base • Power Cord • Video Signal Cable (15-pin mini D-SUB male to DVI) • Video Signal Cable (DVI-D to DVI-D cable) • USB Cable • Monitor Control Software • User’s Manual Power Cord Video signal cable with 15-pin mini D-SUB to DVI cable USB Cable Video signal cable wit
ページ5に含まれる内容の要旨
Quick Start ® ™ To attach the MultiSync FP1350X monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC with DVI digital output: Connect the DVI-D to DVI-D cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with DFP digital output: Connect the DVI to DFP Adapter (not included) to the computer (Figure A.2). Attach the DVI signal cable to the DVI to DFP Adapter. Tighten all screws. For the PC with
ページ6に含まれる内容の要旨
Quick Start cont.Start Figure A.1 Figure A.2 DVI to DFP Adapter (not included) Figure A.3 Note: Some Macintosh systems do not require a Mactintosh cable adapter Macintosh Cable Adapter (not included) Figure B.1 4 7A811011.WPC 6 5/18/00, 12:26 PM
ページ7に含まれる内容の要旨
Quick Start cont.Start Power Outlet Power Cord Figure C.1 DVI/D-SUB Power Button MultiSync EXIT PROCEED RESET DVI/D-SUB Figure D.1 ® If your computer is equipped with USB and uses the Windows 98 operating system and you want to operate the monitor’s user controls using your system, you can install USB ® support by using the following procedure. To attach the USB port on your MultiSync ™ FP1350X monitor to a USB port on your system: 1. Using the supplied USB cable, connect the USB Series B connec
ページ8に含まれる内容の要旨
Controls DVI/D-SUB: Allows you to change between the DVI-analog, DVI-digital and D-SUB signal inputs. ™ OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM menu. Exits to the OSM controls main menu. CONTROL m/n Moves the highlighted Moves the highlighted area area up/down to select up/down to select one of the one of the controls. controls. CONTROL –/+ Moves the highlighted Moves the bar in the –/+ area left/right to sele
ページ9に含まれる内容の要旨
Controls cont.Start ® Color Control/AccuColor Control System Color presets 1 through 5 selects the desired color setting. The bar is replaced by the color setting choice from 1 to 5. Each color setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom. Red, Green, Blue: NEC’s AccuColor Control System decreases or increases the monitor’s red, green or blue color guns depending upon which is selected. The change
ページ10に含まれる内容の要旨
Controls cont. Linearity: This selection allows you to adjust the spacing of the area on the screen. The purpose of this control is to ensure that a one-inch circle is a true one-inch circle wherever it is on the screen. The best way to determine the vertical linearity is as follows: • Draw equally spaced horizontal lines using a drawing application that has a ruler. • Use the Vertical Balance control to adjust the lines near the top and bottom of your screen. • Use the Vertical control to adjus
ページ11に含まれる内容の要旨
Controls cont. ™ IPM System Off Mode: Enable: The IPM System works normally and all stages of energy savings are utilized. Disable: The Off Mode of the IPM System is not used. NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE. ™ EdgeLock Control: Operating your monitor at a non-standard timing may cause images to appear darker than normal or have color distortion. Use of the EdgeLock control will adjust images to their normal state. Video Detect: Selects the met
ページ12に含まれる内容の要旨
Controls cont. Information Display Mode: Indicates the current mode and frequency setting of the monitor. Fitness Tips: The Fitness Tips provide you with helpful reminders to periodically rest your eyes. You may select how frequently the reminders are displayed based upon your individual needs. Select an interval from 15, 30, 45, 60, 90 or 120 minutes for the tips to appear. When the tips appear, follow the advice of the tips and press EXIT to clear. Refresh Notifier: A message will advis
ページ13に含まれる内容の要旨
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® ™ THE MULTISYNC FP1350X COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the
ページ14に含まれる内容の要旨
Recommended Use cont. CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 24 inches. • Rest your eyes periodicall
ページ15に含まれる内容の要旨
Specifications ® ™ Monitor MultiSync FP1350X Notes Specifications Monitor Picture Tube Diagonal: 22 inch/55.3 cm 90° deflection, 0.25 - 0.27 mm (variable) Viewable Image Size: 20 inch/50.8 cm grille pitch, medium short persistence Radius: 57800 mm phosphor, aperture grille CRT, multi-layered, anti-static screen coating, semi-dark-tint ® screen, and OptiClear screen surface. ™ Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms, Digital Input:TMDS Sync: Separate sync. TTL Level Horizontal sync. Positive/
ページ16に含まれる内容の要旨
Features Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is what you get on your printed output. The striped phosphor alignment of the CRT delivers superior vertical definition with improved brightness for more uniform image contrast. ambix™ Technology: Dual input technology allowing both analog and digital inputs off of one connector (DVI-I) as well as additional legacy an
ページ17に含まれる内容の要旨
Features cont. ® ErgoDesign Features: Enhance human ergonomics to improve the working environment, protect the health of the user and save money. Examples include OSM controls for quick and easy image adjustments, tilt/swivel base for pre- ferred angle of vision and compliance with MPRII guidelines for lower emissions. ® ® Plug and Play: The Microsoft solution with the Windows 95/98 operating system facilitates setup and installation by allowing the monitor to send its capabilities (such as scre
ページ18に含まれる内容の要旨
Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. • Check that the DVI/D-SUB button is in the correct position. • Check that DVI selection of OSM is in the correct position. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check pin
ページ19に含まれる内容の要旨
References • BBS (978) 742-8706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: Internet e-mail: tech-support@nectech.com Internet ftp site: ftp.nectech.com World Wide Web: http://www.nectech.com Product Registration: http://www.nectech.co
ページ20に含まれる内容の要旨
Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NECTECH’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or units may be new or refurbished and will meet specifications o
