ページ1に含まれる内容の要旨
User’s Manual / Manuel de l’utilisateur/ Manual del Usuario
®
AccuSync LCD174WXM™
®
AccuSync LCD194WXM™
®
AccuSync LCD224WXM™
To learn about other special offers register online at www.necdisplay.com.
Pour en savoir plus long sur d’autres offres spéciales, inscrives-vous en ligne à www.necdisplay.com.
Para informarse sobre otras ofertas especiales, regístrese en línea en www.necdisplay.com.
ページ2に含まれる内容の要旨
Index Warning .................................................................................................................... 1 Contents ...................................................................................................................2 Quick Start ..............................................................................................................3 Controls ........................................................................................................
ページ3に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNI
ページ4に含まれる内容の要旨
Contents Your new NEC AccuSync LCD monitor box* should contain the following: • AccuSync LCD monitor • Power Cord • User’s Manual • Video Signal Cable • Audio Cable • Base Stand Power Cord Video Signal Cable AccuSync LCD Monitor (Stand not connected) Audio Cable User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. 2
ページ5に含まれる内容の要旨
Quick Start To attach the Base to the LCD Stand: 1. Attach the Base to the Stand. The locking tab on the Stand should fi t into the hole at the Base (Figure 1). Figure 1 Stand Base Locking Tab To attach the AccuSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable (not included) to the connector of the display card in your system (Figure A.1). Tighten all screws. For the
ページ6に含まれる内容の要旨
Quick Start - continued Figure A.1 Figure A.2 Figure A.3 DVI Signal Cable (not included) Macintosh Cable Adapter (not included) Note: Some Macintosh systems do not require a Macintosh Cable Adapter Input (VGA) Power Cable Figure B.1 Input (DVI) Input (Audio) Figure C.1 Power button 4
ページ7に含まれる内容の要旨
Quick Start - continued Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Figure TS.1 NOTE: Handle with care when tilting the monitor screen. Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a nonabrasive surface (Figure R.1). 3. Remove the 2 screws that connect the monitor to the stand and slide the stand off from the LCD (Figure R.2). The m
ページ8に含まれる内容の要旨
Quick Start - continued Removing the Base Release Tab Note: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface. 2. Using your fi ngers, press the 3 release tabs on left or right side at the same time to unlock the Base. 3. Using your fi ngers, press the 3 release tabs on the other side at the same time to unlock the Base. 4. Pull out the unlocked Base. Connecting a Flexible Arm This LCD monitor is designed for use with
ページ9に含まれる内容の要旨
Controls OSD (On-Screen Display) control buttons on the bottom of the monitor function as follows: 1. Basic key function Button –+ SELECT 1<->2 / RESET OSD displayed OSD Off Shortcut to bright Shortcut to volume Select Input Signal adjust window adjust window OSD On Go to Adjustment Cursor moves left Cursor moves right (Icon selection stage stage) Decrease value or Reset operation Increase value or OSD On Go to Icon selection (Adjustment stage Turn MUTE on/off Move highlighed Move highlig
ページ10に含まれる内容の要旨
Controls - continued AUDIO Controls the volume of the speakers or headphones. To mute the speaker output, press the “1<->2 / RESET” button. BRIGHTNESS Adjusts the overall image and background screen brightness. To enter the ECO MODE, press the “1<->2 / RESET“ button. CONTRAST Adjusts the image brightness in relation to the background. AUTO CONTRAST (Analog Input Only) Adjusts the image displayed for non-standard video inputs. AUTO ADJUST (Analog Input Only) Automatically adjusts the Image Posit
ページ11に含まれる内容の要旨
Controls - continued EXIT Selecting EXIT allows you exit OSD menu/sub menu. LANGUAGE OSD control menus are available in seven languages. OSD TURN OFF The OSD control menu will stay on as long as it is in use. In the OSD Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10 - 120 seconds in 5 second intervals. OSD LOCK OUT This control completely locks out access to all OSD control functions wit
ページ12に含まれる内容の要旨
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE ACCUSYNC LCD COLOR MONITOR: � DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel. � Do not spill any liquids into the cabinet or use your monitor near water. � Do not insert objects of any kind into the cabin
ページ13に含まれる内容の要旨
Recommended Use- continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: � For optimum performance, allow 20 minutes for warm-up. � Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. � Position your monitor no closer than 16 inches and no further away than 28 inches
ページ14に含まれる内容の要旨
Specifi cations Monitor AccuSync Specifi cations LCD174WXM Notes LCD Module Diagonal: 17.0 inch Active matrix; thin fi lm transistor (TFT) Viewable Image Size: 17.0 inch liquid crystal display (LCD); 0.255 mm dot 2 Native Resolution (Pixel Count): 1440 x 900 pitch; 250cd/m white luminence; 800:1 contrast ratio, typical Input Signal PC INPUT Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync TTL Level (Positive/Negative) Hori
ページ15に含まれる内容の要旨
Specifi cations Monitor AccuSync Specifi cations LCD194WXM Notes LCD Module Diagonal: 19.0 inch Active matrix; thin fi lm transistor (TFT) Viewable Image Size: 19.0 inch liquid crystal display (LCD); 0.284 mm dot 2 Native Resolution (Pixel Count): 1440 x 900 pitch; 300cd/m white luminence; 1000:1 contrast ratio, typical Input Signal PC INPUT Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync TTL Level (Positive/Negative) Hor
ページ16に含まれる内容の要旨
Specifi cations Monitor AccuSync Specifi cations LCD224WXM Notes LCD Module Diagonal: 22.0 inch Active matrix; thin fi lm transistor (TFT) Viewable Image Size: 22.0 inch liquid crystal display (LCD); 0.282 mm dot 2 Native Resolution (Pixel Count): 1680 x 1050 pitch; 300cd/m white luminence; 900:1 contrast ratio, typical Input Signal PC INPUT Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync TTL Level (Positive/Negative) Hor
ページ17に含まれる内容の要旨
Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. ® AccuColor Control System: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. NaViSet™ Software: NaViSet offers an expanded and intuitive graphical interface, al
ページ18に含まれる内容の要旨
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and reco
ページ19に含まれる内容の要旨
References NEC Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (800) 632-4662 Warranty Information: www.necdisplay.com Online Technical Support www.necdisplay.com Sales and Product Information Sales Information Line: (888) 632-6487 Canadian Customers: (866) 771-0266, Ext#: 4037 Government Sales: (800) 284-6320 Government Sales email: gov@necdisplay.com Electronic Channels World Wi
ページ20に含まれる内容の要旨
Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS’ sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of fi rst consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new
