ページ1に含まれる内容の要旨
AUTO-SCANNING WITH DIGITAL CONTROL
COLOR DISPLAY MONITOR
MODEL : N0701
USER'S MANUAL
For future reference, record the serial
number of your display monitor in the
space below:
SERIAL No.
The serial number is located on the
rear cover of the monitor.
ページ2に含まれる内容の要旨
IBM is registered trademark of International Business Machines Corporation Apple and Macintosh are registered trademarks of Apple Computer Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation. ENERGY STAR is a U.S. registered mark. All other trademarks or registered trademarks are property of their respective owners.
ページ3に含まれる内容の要旨
® ENERGY STAR Product As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR emblem does not represent EPA endorsement of any product or service. RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protect
ページ4に含まれる内容の要旨
TCO'99 Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and ser
ページ5に含まれる内容の要旨
be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental
ページ6に含まれる内容の要旨
Cadmium** Cadmium is present in rechargeable batteries and in the colour- generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO’99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The rel
ページ7に含まれる内容の要旨
English Deutsch Français Español Italiano
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Contents Monitor box* should contain the following: * Remember to save your original box and packing material to transport or ship the monitor. * Complete and mail in warranty card. (for North America) • Color Monitor Diamond Plus 73 E • Warranty card (for North America) • Questionnaire card (for North America) • User‘s manual • Power cord (Put only one Type) UL/CSA (or) Europe (or) UK MANUFATURER DECLARATION CAUTION FOR CE-MARKING: The power cord provided with this mon
ページ10に含まれる内容の要旨
Quick Start To attach the Monitor to your system, follow these instruction: 1 Turn off the power to your computer and the monitor. 2 If necessary, install the display card. For more information, refer to the display card manual. 3 For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1) Tighten all screws. For the Mac: Connect the Macintosh Cable Adapter (not included) to the monitor connector on the Macintosh (Figure
ページ11に含まれる内容の要旨
Mac Adapter (not included) *For Mac Adapter contact your dealer Computer E Captive Signal Cable 15-pin mini D-SUB Figure B.1 Power Outlet Power cord Figure C.1 CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. During servicing, disconnect the plug from the socket-outlet. Figure D.1 E-3
ページ12に含まれる内容の要旨
Controls OSD(On-screen Display) control buttons on the front of the monitor function as follows: SELECT Enters and exits the OSD menu. -/+ Selects one of the controls and decreases or increases the adjustment. RESET Resets the highlighted control to the factory setting. Press -/+ button at the same time for approximately 1 sec. Brightness: Adjusts the overall image and background screen brightness. Contrast: Adjusts the image brightness in relation to the background.(Contrast control is also eff
ページ13に含まれる内容の要旨
Pincushion/Barrel: Decreases or increases the curvature of the sides either inward or outward. Trapezoid: Decreases or increases the bottom of the screen to be the same as the top. Parallelogram: Decreases or increases the tilt of the sides E either to the left or right. Bow (Pincushion Balance): Decreases or increases the curvature of the sides either to the left or right. Rotates: Rotates the image. Degauss: Select the degauss icon on “Icon select window” and push “SELECT” button. It will elim
ページ14に含まれる内容の要旨
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Use the monitor in a clean, dry area. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects o
ページ15に含まれる内容の要旨
• If the monitor does not operate normally by following operating instructions. • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place them monitor near a radiator or other heat sources. Do not put an thing E on top of monitor. • The power cable connector is the primary means of detaching the system from the power supply. The CAUTION monitor should be installed close to a power outlet which is easily accessible. • Handle wit
ページ16に含まれる内容の要旨
• If reflected light makes it hard for you to see your screen, use an anti-glare filter. • Adjust the monitorís brightness and contrast controls to enhance readability. • Use a document holder placed close to the screen. • Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing . • Get regular eye checkups. Cleaning Your Monitor When cleaning the monitor, please follow these guidelines: •
ページ17に含まれる内容の要旨
Specifications Monitor Diamond Plus 73 Notes Specifications Monitor 90˚ deflection, 0.25mm grille pitch, Picture Tube Diagonal : 43cm(17inch) medium short persistence phosphor, Viewable Image Size: 41cm(16inch) aperture grille CRT, multi-layered, anti- Radius: 50000mm staticscreen coating, dark-tint screen. E Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Display Colors Analog input: Depends on the di
ページ18に含まれる内容の要旨
Features Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is what you get on your printed output. The striped phosphor alignment of the CRT delivers superior vertical definition with improved brightness for more uniform image contrast. Screen Surface : Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the f
ページ19に含まれる内容の要旨
Reduced Magnetic Field Technology: Reduces magnetic and alternating electric field emissions and static electricity, addressing ergonomic concerns regarding potential risks from extended computer monitor use and is compliant with MPRII and TCO‘99. Multiple Frequency Technology: Automatically adjusts monitor to the display card‘s scanning frequency, thus displaying the resolution E required. FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding
ページ20に含まれる内容の要旨
Troubleshooting No Picture • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • The signal cable should be completely connected to the display card/computer. • Check the connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check the pin assignment and signal timing of your monitor and display card with respect to the recommended timing
