ページ1に含まれる内容の要旨
46" LCD Display Monitor
USER’S MANUAL
BEDIENERHANDBUCH
MANUAL DEL USUARIO
MANUEL UTILISATEUR
MANUALE UTENTE
GEBRUIKERSHANDLEIDING
ページ2に含まれる内容の要旨
Index Important Information ................................................................................................................................... English-2 Safety Precautions, Maintenance & Recommended Use ........................................................................... English-4 Contents ....................................................................................................................................................... English-5 Parts Name and Functio
ページ3に含まれる内容の要旨
Important Information DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc. Address: 9351 Jeronimo Road, Irvine, California 92618 U.S.A. Tel. No.: +1 - (949) 465-6000
ページ4に含まれる内容の要旨
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE TH
ページ5に含まれる内容の要旨
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE • The power cable connector is the primary means of THE FOLLOWING WHEN SETTING UP AND USING detaching the system from the power supply. The monitor THE LCD COLOR MONITOR: should be installed close to a power outlet, which is easily accessible. • DO NOT REMOVE MONITOR BACK COVER. There are • Handle with care when transporting. Save packaging for no user serviceable parts inside and opening or removing
ページ6に含まれる内容の要旨
Contents Your new LDT461V monitor box* should contain the following: • LCD monitor • Screw for Clamper (to prevent from falling) x 2 • Power Cord (3 m) • Main switch cover • Video Signal Cable (4 m) • Screw for Main Switch cover x 2 • User’s Manual • Cable Holder x 2 • Wireless Remote Control and AAA Batteries • Stand x 2 • Clamper x 2 (To prevent from falling) • Thumbscrew for stand x 4 • Clamper x 2 (For securing cables) User’s Manual Video Signal Cable (D-SUB to D-SUB Cable) Screw for M
ページ7に含まれる内容の要旨
Parts Name and Functions Control Panel Button Location OFF EXIT INPUT MUTE ON DOWN ( ) button POWER button ( ) Switches the power on/off. See also page 19. Activates the OSD menu when the OSD menu is turned-off. Acts as button to move the highlighted area down to select MUTE button the adjustment with OSD menu. Switches the audio mute ON/OFF. EXIT button INPUT button Activates the OSD menu when the OSD menu is turned-off. Acts as SET button with OSD menu. Acts as EXIT button to move to pr
ページ8に含まれる内容の要旨
Terminal Panel (OUT) (IN) (IN) (OUT) AUDIO IN 1, 2, 3 AC IN connector To input audio signal from external equipment such as a com- Connects with the supplied power cord. puter, VCR or DVD player. RGB 1 IN (HDMI 1) AUDIO OUT To input digital RGB signals from a computer. To output the audio signal from the AUDIO IN 1,2 and 3 jack. * This connector does not support analog input. AUDIO is supported via HDMI. EXTERNAL CONTROL (mini D-Sub 9 pin) RGB 2 IN (HDMI 2) Connect the IN connector with
ページ9に含まれる内容の要旨
Wireless Remote Control MINUS button decrease Acts as (-) button to decrease the adjustment with OSD menu. Small screen which adjusted “PIP” mode moves left. SET button Acts as SET button with OSD menu. AUTO SETUP button To enter the auto setup menu. See page 26. MUTE button To switch the mute function on/off. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [RGB4], [DVD/HD], [VIDEO] and [VIDEO]. AUDIO INPUT button Press to change the audio source for each video so
ページ10に含まれる内容の要旨
Operating Range for the Remote Control Handling the remote control Point the top of the remote control toward the LCD monitor's * Do not subject to strong shock. remote sensor during button operation. * Do not allow water or other liquid to splash the remote Use the remote control within a distance of about 7 m/23 ft. control. If the remote control gets wet, wipe it dry immedi- from the front of the LCD monitor's remote control sensor ately. and at a horizontal and vertical angle of within 30
ページ11に含まれる内容の要旨
Setup Procedure • Remove dead batteries immediately to prevent battery 1. Determine the installation location liquid from leaking into the battery compartment. Don't CAUTION: touch exposed battery acid, it cause damage to your skin. DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY NOTE: YOURSELF. If you do not intend to use the Remote Control for a long Installing your LCD display must be done by a quali ed period, remove the batteries. technician. Contact your dealer for more information. CAUT
ページ12に含まれる内容の要旨
7. Adjust the sound 12. To prevent the main power switch Make adjustments when adjustment of the volume is required. from being changed To prevent the ability to use the main power switch, please attach the main switch, which is enclosed as an accessory. 8. Adjust the screen (See pages 23-31) Make adjustments when adjustment of the screen display NOTE: position or distortion is required. With the main power switch cover in place, the main power switch can not be turned off. Remove main power
ページ13に含まれる内容の要旨
LDT461V 14. When LDT461V is installed in portrait position Conditions LDT461V can be installed in portrait position, under the following conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted. The stands(legs) can not be tted to the monitor in portrait position. Placing the monitor in portrait position, will shorten the average life of the LCD backlight. Operational Environment (Temperature) shall be limited, as shown below: Operational Temperature 5 -
ページ14に含まれる内容の要旨
How to Mount and Attach Options to the LCD Monitor You can attach mounting accessories to the LCD monitor in 3. Ventilation Requirements for enclosure one of the following two ways: mounting 1. In the upright position To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 2. Lay the screen face down 4. To avoid monitor from falling 561 561 Protective Take measures to prevent the monitor from falling over in case 100 100 100 100 Sheet of an earthquake
ページ15に含まれる内容の要旨
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram English-14
ページ16に含まれる内容の要旨
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the RGB 3 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • To connect the RGB 4 IN connector (BNC) on the LCD monitor, use a signal cable which is available sep
ページ17に含まれる内容の要旨
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB 1, RGB 2 IN connector accepts a HDMI cable. • The RGB 1, RGB 2 IN connector can connect to HDMI output or DVI-D output of PC. • To maintain display quality, use a cable with a quality prescribed by DVI standards. (See 29 page “DVI-MODE” ) • The
ページ18に含まれる内容の要旨
Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player owner’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). • The AUDIO IN 2 and 3 (both RC
ページ19に含まれる内容の要旨
Connecting to a Stereo Ampli er You can connect your stereo ampli er to your LCD monitor. Refer to your ampli er owner's manual for more information. Connect the LCD Monitor to a Stereo Ampli er • Turn on the LCD monitor and the ampli er only after all connections have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the ampli er. • Do not reverse the audio left and right jacks. • The AUDIO IN 2 and 3 (both RCA) can be used fo
ページ20に含まれる内容の要旨
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the following three options: 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power off the LCD monitor, the remote control and the power button will not activate the on mode and both green and red power indicator turn off. Be sure to turn the Main Power Switch to the on mode before using thes
