ページ1に含まれる内容の要旨
MT3010
User’s Guide
30" Wide-screen LCD Stereo HDTV*
Monitor with Integrated TV Tuner
* High Definition (HDTV) monitors require an optional set-top box to receive true digital high definition broadcasts.
Before operating this product,
please read these instructions completely.
ページ2に含まれる内容の要旨
CONTENTS Contents ................................................................................................................................................................................1 Important Safety Instructions..............................................................................................................................................2 Power Source.......................................................................................................................
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert CAUTION the user to the presence of uninsulated RISK OF ELECTRIC SHOCK dangerous voltage within the product’s enclosure that may be of sufficient magnitude to DO NOT OPEN constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT The exclamation point within an equilateral REMOVE COVER (OR BACK). NO US
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 13. LIGHTNING To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits,
ページ5に含まれる内容の要旨
POWER SOURCE To operate the unit using AC power, connect the AC Adapter to the AC jack on the rear of the unit, then connect the AC adapter to a wall outlet having 120V AC, 60Hz only. AC Outlet NOTE: If the AC adapter’s plug does not fit into a nonpolarized outlet, do not file or cut the wide blade. CAUTION: Use only the AC adapter provided with this unit. Using another AC AC Plug adapter may damage the unit. When not using AC power, disconnect the AC adapter from the wal
ページ6に含まれる内容の要旨
LOCATION OF CONTROLS (CONTINUED) REAR PANEL 5 1 6 7 2 8 3 4 1. HDTV IN Jacks (R/L/PR/PB/Y) 2. S IN Jacks (R/L/S) 3. AV IN Jacks (R/L/V) 4. VGA IN Jack 5. UHF/VHF Antenna Jack 6. AUDIO OUT Jacks (R/L) 7. VGA AUDIO IN Jacks (R/L) 8. COMPONENT IN Jacks (R/L/CR/CB/Y) 5
ページ7に含まれる内容の要旨
REMOTE CONTROL 16 17 18 1 19 2 20 3 4 5 21 6 22 7 8 23 9 24 10 25 11 26 12 27 13 28 14 15 29 1. RECALL Button 16.POWER Button 2. CH LOCK Button 17.Direct Channel Selection Buttons 3. TV/AV/PC Button 18.FAVORITE CHANNEL Up Button 4. CHANNEL Up Button 19.FAVORITE CHANNEL Down Button 5. VOLUME Down Button 20.MENU Button 6. CHANNEL Down Button 21.VOLUME Up Button 7. MTS Button 22.MUTE Button 8. VIDEO MODE Button 23.DISPLAY Button 9. WIDE Button 24.VIDEO MUTE Button 10.AUDIO MODE Button 25.SLEEP TI
ページ8に含まれる内容の要旨
REMOTE CONTROL (CONTINUED) BATTERY INSTALLATION Open the battery compartment cover. 1 Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment. + – Replace the battery compartment cover. – + BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
ページ9に含まれる内容の要旨
CABLE (CATV)/SATELLITE CONNECTIONS This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable tv service not requiring a converter/descrambler box, conne
ページ10に含まれる内容の要旨
OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. Combination VHF/UHF Combination VHF/UHF Antenna (Single 75 ohm cable Antenna (Separate VHF and Separate VHF/UHF Antennas or 300 ohm twin-lead wire) UHF 300 ohm twin-leads) UHF 300 Ohm UHF 300 Ohm Combiner VHF/UHF Combiner 75 Ohm VHF 300 Ohm VHF 75 Ohm Connect the 75 ohm cable from the VHF Connect the 75 ohm cable from the Connec
ページ11に含まれる内容の要旨
VCR CONNECTIONS CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) VCR REAR OF TV INCOMING CATV CABLE From VCR OUT jack 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2. Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV. 3. Press the TV/VIDEO/PC button until regular TV or CATV appears on t
ページ12に含まれる内容の要旨
VCR CONNECTIONS (CONTINUED) CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT INCLUDED.) REAR OF TV REAR OF TV VCR To S AUDIO IN jacks INCOMING CATV CABLE To S VIDEO IN jack From VCR AUDIO AUDIO Cord OUT jacks 1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR. 2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s audio left and
ページ13に含まれる内容の要旨
DVD CONNECTIONS CONNECTION USING AUDIO/VIDEO CABLES: Follow the instructions below to connect a DVD player to your television using Audio/Video cables. (CABLES NOT INCLUDED.) REAR OF TV DVD PLAYER From DVD OUT AUDIO/VIDEO jacks AUDIO/VIDEO Cord To TV IN jacks 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s audio left and right AV IN jacks. Connect the DVD’s video OUT jack to the TV’s video AV IN jack. 2. Press the TV/VIDEO/PC button until AV appears o
ページ14に含まれる内容の要旨
DVD CONNECTIONS (CONTINUED) CONNECTION USING COMPONENT CABLES: Follow the instructions below to connect a DVD player to your television using the Cr, Cb, Y jacks. (CABLES NOT REAR OF TV REAR OF TV DVD PLAYER From AUDIO OUT Jacks To AUDIO IN Jacks From COMPONENT VIDEO OUT Jacks To COMPONENT IN jacks NOTE: Connecting the DVD player to the TV using the component cables will provide the highest quality picture. Connecting using an S-video cable will provide the next highest quality picture,
ページ15に含まれる内容の要旨
HDTV CONNECTION Follow the instructions below to connect an HDTV set top box to your television. (CABLES NOT INCLUDED.) AUDIO/VIDEO Cord From HDTV HDTV SET AUDIO OUT jacks TOP BOX To TV AUDIO IN jacks REAR OF TV From HDTV OUT jacks Video Cord To TV PR, PB,Y IN jacks 1. Connect the left and right audio cable from the HDTV’s Audio OUT jacks to the TV’s HDTV left and right Audio IN jacks. 2. Connect a video cable from the Y, Pb, Pr OUT jacks to the TV’s HDTV IN jacks. 3. Press the TV/VIDEO/P
ページ16に含まれる内容の要旨
WALL MOUNTING THE UNIT Please follow the instructions and figure below to install the unit using the supplied wall brackets and Hook Assemblies: 1. Before wall mounting the unit, you must remove the base stand as follows: a. Remove the two screws, then remove the base cover as shown in figure 1. b. Remove the eight screws, then remove the base stand as shown in figure 2. FIGURE 1 FIGURE 2 CONTINUED ON THE NEXT PAGE 15
ページ17に含まれる内容の要旨
A A A A WALL MOUNTING THE UNIT (CONTINUED) 2. Drill four 5mm holes through the wall for each bracket, or if there is a stud behind the wall where you are putting the bracket, drill four 5mm holes through the wall and into the studs for each bracket. See below figure 3 for lengths. FIGURE 3 3. Secure the Hook Assemblies (A) to the TV by inserting the two screws for each Hook Assembly in the pre-drilled holes in the rear of the set as shown in figure 4. 4. With a helper’s assistance, place th
ページ18に含まれる内容の要旨
CLOCK SETTING 1 2 1 1 2 3 2 Press the POWER button ∂ to turn on the TV; the POWER Press the CHANNEL UP ∂ or DOWN ∑ button until indicator will light green. Press the MENU button ∑; the SYSTEM SETTING is selected, then press the VOLUME UP button ∏ to select it. MENU screen will appear. Press the CHANNEL UP ∂ or DOWN ∑ button until CURRENT TIME is selected. 3 4 1 2 Set the hours using the VOLUME DOWN button ∂ and set Press the MENU button once when finished to return to th
ページ19に含まれる内容の要旨
SETTING THE AIR/CABLE OPTION Set the AIR/CABLE option as follows: 1 2 1 1 2 3 2 Press the POWER button ∂ to turn on the TV; the POWER Press the CHANNEL UP ∂ or DOWN ∑ button until indicator will light green. Press the MENU button ∑; the SYSTEM SETTING is selected, then press the VOLUME UP button ∏ to select it. MENU screen will appear. Press the CHANNEL UP ∂ or DOWN ∑ button until AIR/CABLE is selected. 3 4 2 1 Press the VOLUME UP ∂ or DOWN ∑ button to select Press t
ページ20に含まれる内容の要旨
SETTING THE CHANNELS INTO MEMORY This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels. 1 2 1 1 2 3 2 Press the POWER button ∂ to turn on the TV; the POWER Press the CHANNEL UP ∂ or DOWN ∑ button u
