ページ1に含まれる内容の要旨
Memorex MM1520
Operation Manual
For 15" Color Monitor
Please read the operation manual carefully before using
1
ページ2に含まれる内容の要旨
C o n t e n t s Introduction preface……………………………………………………………………………………………..2 Features……………………………………………………………………………………………..2 Safety Specifications Warning……………………………………………………………………………………………..2 Safety procedure…………………………………………………………………………………..3 Operation directory Operation Instructions ……………………………………………………………………………..3 Introduction of Function Keys………………………………………………………………..4 Three-brightness-mode ………………………………………………………………..4 Main menu for customs adjustment
ページ3に含まれる内容の要旨
Welcome to use the high-resolution monitor of our company. This manual includes matters concerning usage and operation of the monitor. Please read this manual carefully so that your monitor can work perfectly. After reading please keep the manual for future reference You will find the following items in the packing box of the monitor： * One monitor. * One operation manual * One warranty card * One power cable * One revolving base F
ページ4に含まれる内容の要旨
Statement:： This is product grade A, it maybe cause radio interference during work ambierce ? And user will probably have to take reasonable anti-interference measurements under this condition. 1． .Before connecting the power supply , you should confirm that the local ammeter meets the requirements of monitor。 2． .In order to prevent electricity shock, do not touch the inner of the monitor .Only the professional technical personals can open the cover of the monitor。 3． Please
ページ5に含まれる内容の要旨
10． If the monitor cannot work normally, especially there is abnormal sound or burnt flavor in side it ,you should turn off the power supply immediately and contact with the supplier。 11．High temperature can cause trouble, so do not use the monitor in the place there is sunshine The monitor should be putted in the place being distant to the heater, the stove fireplace or other heat source. 12．.Disconnect the plug if you will not use the monitor for a long period of time. 13．Disconnect the
ページ6に含まれる内容の要旨
Introduction of function keys： *“EXIT/H.B”. button is used to switch between three brightness modes (soft ,standard and rich vibrant mode) and to exit the main menu,， “MENU/ENTER”button is to display the menu and to confirm the selection or setting“ . +/ ►” and“—/ ◄” is used to make selections and in operation menu and to make adjustment.。 *Three- brightness-mode: Three-brightness-mode technology is adopted for optimum display performance with multiple applications. use the handy hot
ページ7に含まれる内容の要旨
Stup5：Press the key“MENU/ENTER”and confirm the adjustment of the fourth procedure, the window will change from red to blue。 Step6：Repeat the procedures of 2-5 and adjust other functions。 Step7：Exit the main menu by choosing the EXIT of the selected menu and confirm or press the key “EXIT/H.B”. The menu will exit automatically if you wait for 10 seconds after exiting the menu, the adjustment will be stored automatically Menu function and description To vary t
ページ8に含まれる内容の要旨
Selection among 9300K, 6500K, and colour Color RGB temperature of user mode Adjust the degree of moiré cancellation until the Moire moiré is at a minimum, Normal value should be 0 . Setup the location of OSD and the exit time of OSD. OSD triggering, the actual time approximately equals to the shown time plus 5 with the unit is Second Switch-over of language is indicated by menu, Language including English, Chinese and other 6 languages etc Degauss Degauss manually .Use this selec
ページ9に含まれる内容の要旨
Following is signal standard of power supply control. Synchronization Stature Mode of power supply control Signal Normal Mode of energy-saving Horizontal on On/off Synchronization Vertical On Off/on synchronization LED indicator Green/Blue Red Power 80W(maximum) Less than 5W consumption The following figure is the view looking into the pin end of video connector The following table provides the pin numbers and corresponding pin assignments for video connector wit
ページ10に含まれる内容の要旨
6 Red Ground Pin# 6 7 Green Ground Pin# 7 8 Blue Ground Pin# 8 9 Empty Pin# 9 10 Sync Ground Pin# 10 11 Empty Pin# 11 12 Bi-Directional Data(SDA) Pin# 12 13 Horizontal Sync Pin# 13 14 Vertical Sync Pin# 14 15 Data Clock (SCL). Pin# 15 Other specification and Parameters： .Display color unlimited Max resolution（PROGRESSIVE SCAN） 1024x768（Refresh f requency70Hz） Sync Input Signal Separate H/V sync. TTL level, positive or negative Video input signal RGB, Analog（0.7v P-P）Positive at7
ページ11に含まれる内容の要旨
No image .Connected to the Power supply or not .Connect the Power supply Switch of Power supply is off not Signal Close the switch cable connected correctly or not monitor Connect the signal cable correctly is on the condition of energy-saving or Press any key on the keyboard or not move the mouse The color There is object with strong magnetic field Move the object or the monitor display is or not Use the signal electrical outlet abnormal The array of stitch on signal electrical adopted
ページ12に含まれる内容の要旨
standards supported by most video adaptors, If the monitor recognizes that the current standard is supported it will use this standard and save the values adjusted by the user.。 NO Standard Resolution Horizontal Vertical Frequency Frequency 1 IBM/VGA 640x480 31.47KHz 60Hz 2 VESA/VGA 720x400 31.47KHz 70Hz 3 VESA/75 640x480 37.5KHz 75Hz 4 VESA/75 800x600 46.88KHz 75Hz 5 VESA/60 1024x768 48.02KHz 60Hz 6 VESA/85 800x600 53.67KHz 85Hz Note：The design and specification subject to change with
