ページ1に含まれる内容の要旨
1
E
17C13A2E
N
AutoScan Color Monitor
English Operating Instructions ................. 2 - 19
Français Mode d'emploi …………… 20 - 37
Appendix
English Declaration FCC ........ A1
Information for Users in the U.S. ...... A3
Warranty/address A5 ... A6
Deutsch Hinweis/GS/ACHTUNG ........ A4
Français Declaration FCC ........ A2
For Customer Use:
Enter below the Serial No. which is located on the
back of the cabinet. Retain this information for
future reference.
Model No. 17C1
ページ2に含まれる内容の要旨
2 E Introduction N The colour monitor displays sharp images of text and graphics with a maximum resolution up to 1280x1024 pixels. It is optimal for Windows, CAD / CAM / CAE, desktop publishing, spread sheets, multi-media, and any other application which demands large screen size and high resolutions. This monitor automatically scans horizontal frequencies from 30KHz to 69KHz, and vertical frequencies from 50Hz to 120Hz. With microprocessor based digital controlled circuit, the monitor can autom
ページ3に含まれる内容の要旨
3 E N Note: If you experienced your monitor display is changing from color to mono, it's possible that you are using a non-VESA-DDC-standard video card. Please consult with your local PHILIPS dealer for more information. As an Energy Star Partner, MAGNAVOX, has determined that this product meets the Energy Star guidelines for energy efficiency. IBM, IBM PC and Power PC are registered trademarks of International Business Machines Corporation.
ページ4に含まれる内容の要旨
4 E Safety precautions and maintenance N Disconnect the monitor from the mains supply if the monitor is not to be used for an extended period of time. Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. Do not place objects on top of the monitor cabinet, which could fall into vents or which could cover them and prevent proper cooling of the monitor’s electronic devices. Do not expose the
ページ5に含まれる内容の要旨
5 E Installation N Important: Please refer to the user’s manuals of your computer and video adapter to make sure these equipments are properly installed and configured before installing the monitor. Positioning / Ventilation Avoid exposing the monitor to direct sunlight, stoves or any other heat sources. To prevent overheating, make sure that the ventilation openings of the monitor are not covered. Keep moisture and dust away. Keep away from any magnetic objects, such as speakers, electr
ページ6に含まれる内容の要旨
6 E Connection N Important: Please make sure the AC power to your computer is “OFF” before connecting or disconnecting any display peripheral. Failure to do so may cause serious personal injury as well as permanent damage to your computer equipments. • Connect the monitor to the computer using the supplied interface cables. Connection with computer system other than IBM PC or Apple computers may need different type of adapters. Please consult your computer supplier for these adapters. Connect t
ページ7に含まれる内容の要旨
7 E Control locations and functions N Monitor control panel ➃ ➁ ➀ ➄ ➂ Descriptions of knobs and keypads on front control panel ➀ • Press this knob to switch ON and OFF of monitor’s power. ➁ • OSD rotary control knob. ➂ • Active OSD menu. √ • Adjust contrast of the display. ➄ • Adjust brightness of the display.
ページ8に含まれる内容の要旨
8 E OSD menu tree structure N First Level Second Level Third Level BRIGHTNESS & CONTRAST BRIGHTNESS CONTRAST SAVE CANCEL SIZE & POSITION HORIZONTAL SIZE HORIZONTAL POSITION VERTICAL SIZE VERTICAL POSITION SAVE CANCEL GEOMETRY PINCUSHION TRAPEZOID TILT SAVE CANCEL COLOR TEMPERATURE 9300K RED 6500K GREEN USER COLOR #1 BLUE USER COLOR #2 SAVE SAVE CANCEL CANCEL V DEGAUSSING SPECIAL H MOIRE CANCELLATION SAVE SAVE CANCEL CANCEL RECA
ページ9に含まれる内容の要旨
9 E On-Screen-Display N Activating the On-Screen-Display The monitor controls are accessed by pressing button to enable OSD (On-Screen-Display). The main menu will be displayed as follows. 1280 x 768 68.7k 85Hz 1 2 3 4 5 6 Each Sub-Menu (1-6) is selected by highlighting it via the rotary control and pressing button to confirm. To exit OSD, highlight at the bottom of the main menu and press select button . While operating Sub-Menu, please use rotary control to select or adjust and press bu
ページ10に含まれる内容の要旨
10 E Contrast : Adjusts contrast between foreground and background. N 1 1 63% Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. Sub Menu-2: SIZE & POSITION Horizontal Size : Adjusts image width 2 2 A A 63% Horizontal Position : Moves image left or right 2 2 A A 63%
ページ11に含まれる内容の要旨
11 E Vertical Size : Adjusts image height N 2 2 A A 63% Vertical Position : Moves image up or down 2 2 A A 63% Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. Sub Menu-3: GEOMETRY Pincushion : Adjusts the amount of curvature on the vertical edges. 3 3 A A 63% Trapezoid : Equalizes the length of the top and bottom edges. 3 3 AA 63%
ページ12に含まれる内容の要旨
A 12 E Tilt : Tilts the image clockwise or counter-clockwise. N 3 3 63% Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. Sub Menu-4: COLOR TEMPERATURE 9300°K : Factory preset color temperature of 9300°K. 4 4 9300ºK 6500ºK 9300ºK 6500ºK 1 2 1 2 6500°K : Factory preset color temperature of 6500°K. 4 4 9300ºK 6500ºK 9300ºK 6500ºK 1 2 1 2 A
ページ13に含まれる内容の要旨
13 E User 1 : User set 1 for color temperature then select R, G or B 1 N for adjustment. R : Adjusts red intensity. G : Adjusts green intensity. B : Adjusts blue intensity. 4 4 4 4 9300ºK 6500ºK 9300ºK 6500ºK 9300ºK 6500ºK 9300ºK 6500ºK 1 2 1 2 1 2 1 2 63% 63% 63% R R R G 63% G 63% G 63% B 63% B 63% B 63% User 2 : User set 2 for color temperature then select R, G or B 2 for adjustment. R : Adjusts red intensity. G : Adjusts green intensi
ページ14に含まれる内容の要旨
14 E Sub Menu-5: SPECIAL N Manual Degauss : Discoloration of the image can be caused by gradual magnetization of the monitor components. This is particularly likely to occur when the monitor is moved or rotated. The monitor may "buzz" momentarily when the user control is selected and the image will change color and wobble for a few seconds. These effects are normal. 5 5 Moire Cancellation : Moire effect may be found in some display modes. If this is the case, please use "Moire Cancellation"
ページ15に含まれる内容の要旨
15 Sub Menu-6: RECALL FACTORY PRESETS E Recall : Recall brightness and contrast presets. N 7 7 Recall : Recall size and phase presets. 7 7 Recall : Recall geometry preset. 7 7 Save : Save user adjustment and return to main menu. Cancel : Abandon setup and return to main menu. * Whenever the signal cable is disconnected, the screen will appear a message as below: CHECK S I GNAL CABL E
ページ16に含まれる内容の要旨
16 E N Data Storage (A) Factory preset mode: This monitor has 11 factory-preset modes as indicated in the following table: Frequence Sync polarity Mode Resolution H(KHz) V(Hz) H V M01 VGA 640x400 31.5 70 – + M02 VGA 640x480 31.5 60 –– M03 VGA 640x480 37.5 75 – – M04 VESA 640x480 43.3 85 –– M05 SVGA 800x600 37.8 60 + + M06 SVGA 800x600 46.9 75 + + M07 VESA 800x600 53.7 85 + + M08 VESA 1024x768 48.4 60 –– M09 VESA 1024x768 60.0 75 + + M10 VESA 1024x768 68.7 85 + + M11 V
ページ17に含まれる内容の要旨
17 E N Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from keyboard, mouse or other input devices is detected, the monitor will automatically “wake up”. The following table shows the power consumption and signalling of this automatic power saving feature: Power Management Definition VESA's mode Video H-sync V-sync Power Power LED
ページ18に含まれる内容の要旨
18 E Specification* N (I) General CRT Screen size : 17" (43.2 cm) flat & square Dot pitch : 0.28 mm Phosphor : P22 or equivalent, medium short persistence Screen treatment : Anti-glare, anti-static Display area Factory preset : 306 mm (H) x 230 mm (V) Maximum usable : 323 mm (H) x 242 mm (V) Scanning frequency Horizontal (line) : 30-69 kHz (AutoScan) Vertical (frame) : 50-120 Hz (AutoScan) Input power : 100-240 VAC, 50-60 Hz Power consumption : 100 Watt normal, 110 Watt maximum Input signal Vide
ページ19に含まれる内容の要旨
19 E (II) Pin assignment: N 1 5 6 10 11 15 The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No. Assignment Pin No. Assignment 1 Red video input 9 No pin 2 Green video input 10 Self-test 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 Identical output 13 H. Sync / H+V - Connected to pin 10 14 V. Sync (VCLK for DDC) 6 Red video ground 15 Data clock line (SDA) 7 Green video ground 8 Blue video ground
